[lkml]   [2009]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Patch in this message
    Subject[PATCH 09/10] OMAP3 clock: lessen amount of noisy messages
    From: Artem Bityutskiy <>

    On our system we see the following messages:

    Disabling unused clock "gpt2_ick"
    Disabling unused clock "gpt3_ick"
    Disabling unused clock "gpt4_ick"
    Disabling unused clock "gpt5_ick"

    The messages have KERN_INFO level and if you have serial
    console, they normally go there. I do not think it is good
    idea to print that much stuff there. Moreover, messages
    are not properly prefixed and for mortals it is not
    immeadietly clear where they come from.

    Let's give them debugging level instead.

    Signed-off-by: Artem Bityutskiy <>
    Signed-off-by: Paul Walmsley <>
    [ trimmed debugging output in patch description]
    arch/arm/mach-omap2/clock.c | 2 +-
    1 files changed, 1 insertions(+), 1 deletions(-)

    diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
    index 8935a8b..076f0a7 100644
    --- a/arch/arm/mach-omap2/clock.c
    +++ b/arch/arm/mach-omap2/clock.c
    @@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
    if ((regval32 & (1 << clk->enable_bit)) == v)

    - printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
    + printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
    if (cpu_is_omap34xx()) {

     \ /
      Last update: 2009-05-13 02:15    [W:0.048 / U:1.244 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site