lkml.org 
[lkml]   [2009]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards
This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller
for PIXIS' sdcsr bank that is used for managing SPI chip-select and
for reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 32 ++++++++++++++++++++++++++++
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 4 +++
2 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1bd3ebe..dbb80f7 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -100,8 +100,18 @@
};

board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,fpga-pixis";
reg = <3 0 0x20>;
+ ranges = <0 3 0 0x20>;
+
+ sdcsr_pio: gpio-controller@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,fpga-pixis-gpio-bank";
+ reg = <0xa 1>;
+ gpio-controller;
+ };
};
};

@@ -164,6 +174,28 @@
interrupt-parent = <&mpic>;
};

+ spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8610-spi", "fsl,spi";
+ reg = <0x7000 0x40>;
+ cell-index = <0>;
+ interrupts = <59 2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+ gpios = <&sdcsr_pio 7 0>;
+
+ mmc-slot@0 {
+ compatible = "fsl,mpc8610hpcd-mmc-slot",
+ "mmc-spi-slot";
+ reg = <0>;
+ gpios = <&sdcsr_pio 0 1 /* nCD */
+ &sdcsr_pio 1 0>; /* WP */
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
display@2c000 {
compatible = "fsl,diu";
reg = <0x2c000 100>;
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 3f49a6f..ce64572 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -38,6 +38,7 @@
#include <linux/of_platform.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/simple_gpio.h>

#include "mpc86xx.h"

@@ -52,6 +53,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {

static int __init mpc8610_declare_of_platform_devices(void)
{
+ /* Firstly, register PIXIS GPIOs. */
+ simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);

--
1.6.2.2


\
 
 \ /
  Last update: 2009-05-01 01:55    [W:0.300 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site