lkml.org 
[lkml]   [2009]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] x86/irq: use move_irq_desc only when CONFIG_NUMA_IRQ_DESC is set

add config NUMA_IRQ_DESC, and create_irq_nr(), it will call move_irq_desc.

move_irq_desc will try to move irq_desc to node wanted if allocated one is not correct.
(happen on device on different nodes that are using MSI, driver are loaded and unloaded
randomly)

[ Impact: make irq_desc go with device on node ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
arch/x86/Kconfig | 9 +++++++++
arch/x86/kernel/apic/io_apic.c | 18 +++++++++++-------
include/linux/irq.h | 11 +++++++++--
kernel/irq/Makefile | 2 +-
4 files changed, 30 insertions(+), 10 deletions(-)

Index: linux-2.6/arch/x86/Kconfig
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig
+++ linux-2.6/arch/x86/Kconfig
@@ -280,6 +280,15 @@ config SPARSE_IRQ

If you don't know what to do here, say N.

+config NUMA_IRQ_DESC
+ bool "put irq desc on numa node memory"
+ depends on SPARSE_IRQ && NUMA
+ default n
+ ---help---
+ This enables irq_desc to cpu/node that that device is connected.
+
+ If you don't know what to do here, say N.
+
config X86_MPPARSE
bool "Enable MPS table" if ACPI
default y
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -246,7 +246,7 @@ int arch_init_chip_data(struct irq_desc
return 0;
}

-/* for move_irq_desc */
+#ifdef CONFIG_NUMA_IRQ_DESC
static void
init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node)
{
@@ -347,7 +347,7 @@ void arch_free_chip_data(struct irq_desc
old_desc->chip_data = NULL;
}
}
-/* end for move_irq_desc */
+#endif

#else
static struct irq_cfg *irq_cfg(unsigned int irq)
@@ -3143,6 +3143,10 @@ unsigned int create_irq_nr(unsigned int
if (irq_want < nr_irqs_gsi)
irq_want = nr_irqs_gsi;

+#ifndef CONFIG_NUMA_IRQ_DESC
+ node = cpu_to_node(boot_cpu_id);
+#endif
+
spin_lock_irqsave(&vector_lock, flags);
for (new = irq_want; new < nr_irqs; new++) {
desc_new = irq_to_desc_alloc_node(new, node);
@@ -3155,11 +3159,7 @@ unsigned int create_irq_nr(unsigned int
if (cfg_new->vector != 0)
continue;

-#ifdef CONFIG_NUMA_IRQ_DESC
- /* different node ?*/
- if (desc_new->node != node)
- desc = move_irq_desc(desc, node);
-#endif
+ desc_new = move_irq_desc(desc_new, node);

if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
irq = new;
@@ -3938,10 +3938,14 @@ int io_apic_set_pci_routing(struct devic
return -EINVAL;
}

+#ifdef CONFIG_NUMA_IRQ_DESC
if (dev)
node = dev_to_node(dev);
else
node = cpu_to_node(boot_cpu_id);
+#else
+ node = cpu_to_node(boot_cpu_id);
+#endif

desc = irq_to_desc_alloc_node(irq, node);
if (!desc) {
Index: linux-2.6/include/linux/irq.h
===================================================================
--- linux-2.6.orig/include/linux/irq.h
+++ linux-2.6/include/linux/irq.h
@@ -206,10 +206,17 @@ extern void arch_free_chip_data(struct i

#ifndef CONFIG_SPARSE_IRQ
extern struct irq_desc irq_desc[NR_IRQS];
-#else /* CONFIG_SPARSE_IRQ */
-extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int node);
#endif /* CONFIG_SPARSE_IRQ */

+#ifdef CONFIG_NUMA_IRQ_DESC
+extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int node);
+#else
+static inline struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
+{
+ return desc;
+}
+#endif
+
extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);

/*
Index: linux-2.6/kernel/irq/Makefile
===================================================================
--- linux-2.6.orig/kernel/irq/Makefile
+++ linux-2.6/kernel/irq/Makefile
@@ -3,5 +3,5 @@ obj-y := handle.o manage.o spurious.o re
obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
-obj-$(CONFIG_SPARSE_IRQ) += numa_migrate.o
+obj-$(CONFIG_NUMA_IRQ_DESC) += numa_migrate.o
obj-$(CONFIG_PM_SLEEP) += pm.o

\
 
 \ /
  Last update: 2009-04-28 23:45    [W:0.115 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site