lkml.org 
[lkml]   [2009]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectProposal: make RAID6 code optional
Date
Hi,

as I am using only RAID5 I wonder why the RAID6 code also needs to be built.
Here is a rough patch of making RAID6 optional (but depending on raid456)
without reording of functions to minimize ifdef scattering.
(I also haven't checked yet who needs ASYNC_MEMCPY and ASYNC_XOR...)
It would probably be nicer to make RAID4/5 and RAID6 independently selectable
of each other. But that requires more refactoring, as I can see.

I am willing to do more cleanups, so please provide some comments. I am not a
kernel hacker so please bear with me. ;-)

Greetings,

Prakash

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 36e0675..0d98b3a 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -121,7 +121,6 @@ config MD_RAID10
config MD_RAID456
tristate "RAID-4/RAID-5/RAID-6 mode"
depends on BLK_DEV_MD
- select MD_RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
---help---
@@ -152,8 +151,15 @@ config MD_RAID456

If unsure, say Y.

-config MD_RAID6_PQ
- tristate
+config MD_RAID6
+ boolean "Include RAID-6 support"
+ depends on MD_RAID456
+ select ASYNC_MEMCPY
+ select ASYNC_XOR
+ ---help---
+ If you want to use such a RAID-6 set, say Y.
+
+ If unsure, say Y.

config MD_MULTIPATH
tristate "Multipath I/O support"
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 45cc595..5084b23 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_MD_LINEAR) += linear.o
obj-$(CONFIG_MD_RAID0) += raid0.o
obj-$(CONFIG_MD_RAID1) += raid1.o
obj-$(CONFIG_MD_RAID10) += raid10.o
-obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o
+obj-$(CONFIG_MD_RAID6) += raid6_pq.o
obj-$(CONFIG_MD_RAID456) += raid456.o
obj-$(CONFIG_MD_MULTIPATH) += multipath.o
obj-$(CONFIG_MD_FAULTY) += faulty.o
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3bbc6d6..fc29b4b 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -128,6 +128,7 @@ static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
}

+#ifdef CONFIG_MD_RAID6
/* Find first data disk in a raid6 stripe */
static inline int raid6_d0(struct stripe_head *sh)
{
@@ -163,6 +164,7 @@ static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
slot = (*count)++;
return slot;
}
+#endif

static void return_io(struct bio *return_bi)
{
@@ -1594,7 +1596,7 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous)
}


-
+#ifdef CONFIG_MD_RAID6
/*
* Copy data between a page in the stripe cache, and one or more bion
* The page could align with the middle of the bio, or there could be
@@ -1738,7 +1740,6 @@ static void compute_parity6(struct stripe_head *sh, int method)
}
}

-
/* Compute one missing block */
static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
{
@@ -1840,6 +1841,7 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags);
set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags);
}
+#endif

static void
schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
@@ -1986,12 +1988,14 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in

static void end_reshape(raid5_conf_t *conf);

+#ifdef CONFIG_MD_RAID6
static int page_is_zero(struct page *p)
{
char *a = page_address(p);
return ((*(u32*)a) == 0 &&
memcmp(a, a+4, STRIPE_SIZE-4)==0);
}
+#endif

static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
struct stripe_head *sh)
@@ -2174,6 +2178,7 @@ static void handle_stripe_fill5(struct stripe_head *sh,
set_bit(STRIPE_HANDLE, &sh->state);
}

+#ifdef CONFIG_MD_RAID6
static void handle_stripe_fill6(struct stripe_head *sh,
struct stripe_head_state *s, struct r6_state *r6s,
int disks)
@@ -2231,7 +2236,7 @@ static void handle_stripe_fill6(struct stripe_head *sh,
}
set_bit(STRIPE_HANDLE, &sh->state);
}
-
+#endif

/* handle_stripe_clean_event
* any written block on an uptodate or failed drive can be returned.
@@ -2373,6 +2378,7 @@ static void handle_stripe_dirtying5(raid5_conf_t *conf,
schedule_reconstruction5(sh, s, rcw == 0, 0);
}

+#ifdef CONFIG_MD_RAID6
static void handle_stripe_dirtying6(raid5_conf_t *conf,
struct stripe_head *sh, struct stripe_head_state *s,
struct r6_state *r6s, int disks)
@@ -2472,6 +2478,7 @@ static void handle_stripe_dirtying6(raid5_conf_t *conf,
}
}
}
+#endif

static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks)
@@ -2559,7 +2566,7 @@ static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
}
}

-
+#ifdef CONFIG_MD_RAID6
static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s,
struct r6_state *r6s, struct page *tmp_page,
@@ -2652,6 +2659,7 @@ static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
set_bit(STRIPE_INSYNC, &sh->state);
}
}
+#endif

static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh,
struct r6_state *r6s)
@@ -3003,6 +3011,7 @@ static bool handle_stripe5(struct stripe_head *sh)
return blocked_rdev == NULL;
}

+#ifdef CONFIG_MD_RAID6
static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
{
raid5_conf_t *conf = sh->raid_conf;
@@ -3239,13 +3248,16 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)

return blocked_rdev == NULL;
}
+#endif

/* returns true if the stripe was handled */
static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
{
+#ifdef CONFIG_MD_RAID6
if (sh->raid_conf->level == 6)
return handle_stripe6(sh, tmp_page);
else
+#endif
return handle_stripe5(sh);
}

@@ -5190,6 +5202,7 @@ static int raid5_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
return 0;
}

+#ifdef CONFIG_MD_RAID6
static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)
{
if (new_layout >= 0 && !algorithm_valid_raid6(new_layout))
@@ -5214,7 +5227,7 @@ static int raid6_reconfig(mddev_t *mddev, int new_layout, int new_chunk)

return 0;
}
-
+#endif
static void *raid5_takeover(mddev_t *mddev)
{
/* raid5 can take over:
@@ -5242,6 +5255,7 @@ static void *raid5_takeover(mddev_t *mddev)

static struct mdk_personality raid5_personality;

+#ifdef CONFIG_MD_RAID6
static void *raid6_takeover(mddev_t *mddev)
{
/* Currently can only take over a raid5. We map the
@@ -5288,7 +5302,6 @@ static void *raid6_takeover(mddev_t *mddev)
return setup_conf(mddev);
}

-
static struct mdk_personality raid6_personality =
{
.name = "raid6",
@@ -5312,6 +5325,7 @@ static struct mdk_personality raid6_personality =
.takeover = raid6_takeover,
.reconfig = raid6_reconfig,
};
+#endif
static struct mdk_personality raid5_personality =
{
.name = "raid5",
@@ -5360,7 +5374,9 @@ static struct mdk_personality raid4_personality =

static int __init raid5_init(void)
{
+#ifdef CONFIG_MD_RAID6
register_md_personality(&raid6_personality);
+#endif
register_md_personality(&raid5_personality);
register_md_personality(&raid4_personality);
return 0;
@@ -5368,7 +5384,9 @@ static int __init raid5_init(void)

static void raid5_exit(void)
{
+#ifdef CONFIG_MD_RAID6
unregister_md_personality(&raid6_personality);
+#endif
unregister_md_personality(&raid5_personality);
unregister_md_personality(&raid4_personality);
}
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2009-04-18 09:45    [W:0.083 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site