lkml.org 
[lkml]   [2009]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH/RFC 07/16] m68k: amiga - A3000 SCSI platform device conversion
Date
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-scsi@vger.kernel.org
---
arch/m68k/amiga/platform.c | 11 ++
drivers/scsi/a3000.c | 373 ++++++++++++++++++++++++-------------------
2 files changed, 219 insertions(+), 165 deletions(-)

diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
index 38f18bf..df1fae3 100644
--- a/arch/m68k/amiga/platform.c
+++ b/arch/m68k/amiga/platform.c
@@ -58,6 +58,13 @@ subsys_initcall(amiga_init_bus);
#endif /* CONFIG_ZORRO */


+static const struct resource a3000_scsi_resource __initconst = {
+ .start = 0xdd0000,
+ .end = 0xdd00ff,
+ .flags = IORESOURCE_MEM,
+};
+
+
static int __init amiga_init_devices(void)
{
if (!MACH_IS_AMIGA)
@@ -77,6 +84,10 @@ static int __init amiga_init_devices(void)
if (AMIGAHW_PRESENT(AMI_FLOPPY))
platform_device_register_simple("amiga-floppy", -1, NULL, 0);

+ if (AMIGAHW_PRESENT(A3000_SCSI))
+ platform_device_register_simple("amiga-a3000-scsi", -1,
+ &a3000_scsi_resource, 1);
+
return 0;
}

diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index 6970ce8..73bf9ff 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -1,202 +1,157 @@
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/blkdev.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>

#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <asm/irq.h>

#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "a3000.h"

-#include<linux/stat.h>

-#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base))
-#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
-
-static struct Scsi_Host *a3000_host = NULL;
-
-static int a3000_release(struct Scsi_Host *instance);
-
-static irqreturn_t a3000_intr (int irq, void *dummy)
+static irqreturn_t a3000_intr(int irq, void *data)
{
+ struct Scsi_Host *host = data;
unsigned long flags;
- unsigned int status = DMA(a3000_host)->ISTR;
+ a3000_scsiregs *regs = (a3000_scsiregs *)(host->base);
+ unsigned int status = regs->ISTR;

if (!(status & ISTR_INT_P))
return IRQ_NONE;
- if (status & ISTR_INTS)
- {
- spin_lock_irqsave(a3000_host->host_lock, flags);
- wd33c93_intr (a3000_host);
- spin_unlock_irqrestore(a3000_host->host_lock, flags);
+ if (status & ISTR_INTS) {
+ spin_lock_irqsave(host->host_lock, flags);
+ wd33c93_intr(host);
+ spin_unlock_irqrestore(host->host_lock, flags);
return IRQ_HANDLED;
}
- printk("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
+ pr_warning("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);
return IRQ_NONE;
}

static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
- unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
- unsigned long addr = virt_to_bus(cmd->SCp.ptr);
-
- /*
- * if the physical address has the wrong alignment, or if
- * physical address is bad, or if it is a write and at the
- * end of a physical memory chunk, then allocate a bounce
- * buffer
- */
- if (addr & A3000_XFER_MASK)
- {
- HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
- & ~0x1ff;
- HDATA(a3000_host)->dma_bounce_buffer =
- kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL);
-
- /* can't allocate memory; use PIO */
- if (!HDATA(a3000_host)->dma_bounce_buffer) {
- HDATA(a3000_host)->dma_bounce_len = 0;
- return 1;
- }
-
- if (!dir_in) {
- /* copy to bounce buffer for a write */
- memcpy (HDATA(a3000_host)->dma_bounce_buffer,
- cmd->SCp.ptr, cmd->SCp.this_residual);
+ struct Scsi_Host *host = cmd->device->host;
+ struct WD33C93_hostdata *hdata = shost_priv(host);
+ a3000_scsiregs *regs = (a3000_scsiregs *)(host->base);
+ unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
+ unsigned long addr = virt_to_bus(cmd->SCp.ptr);
+
+ /*
+ * if the physical address has the wrong alignment, or if
+ * physical address is bad, or if it is a write and at the
+ * end of a physical memory chunk, then allocate a bounce
+ * buffer
+ */
+ if (addr & A3000_XFER_MASK) {
+ hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+ hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len,
+ GFP_KERNEL);
+
+ /* can't allocate memory; use PIO */
+ if (!hdata->dma_bounce_buffer) {
+ hdata->dma_bounce_len = 0;
+ return 1;
+ }
+
+ if (!dir_in) {
+ /* copy to bounce buffer for a write */
+ memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+ cmd->SCp.this_residual);
+ }
+
+ addr = virt_to_bus(hdata->dma_bounce_buffer);
}

- addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer);
- }
+ /* setup dma direction */
+ if (!dir_in)
+ cntr |= CNTR_DDIR;

- /* setup dma direction */
- if (!dir_in)
- cntr |= CNTR_DDIR;
+ /* remember direction */
+ hdata->dma_dir = dir_in;

- /* remember direction */
- HDATA(a3000_host)->dma_dir = dir_in;
+ regs->CNTR = cntr;

- DMA(a3000_host)->CNTR = cntr;
+ /* setup DMA *physical* address */
+ regs->ACR = addr;

- /* setup DMA *physical* address */
- DMA(a3000_host)->ACR = addr;
+ if (dir_in)
+ /* invalidate any cache */
+ cache_clear(addr, cmd->SCp.this_residual);
+ else
+ /* push any dirty cache */
+ cache_push(addr, cmd->SCp.this_residual);

- if (dir_in)
- /* invalidate any cache */
- cache_clear (addr, cmd->SCp.this_residual);
- else
- /* push any dirty cache */
- cache_push (addr, cmd->SCp.this_residual);
+ /* start DMA */
+ mb(); /* make sure setup is completed */
+ regs->ST_DMA = 1;
+ mb(); /* make sure DMA has started before next IO */

- /* start DMA */
- mb(); /* make sure setup is completed */
- DMA(a3000_host)->ST_DMA = 1;
- mb(); /* make sure DMA has started before next IO */
-
- /* return success */
- return 0;
+ /* return success */
+ return 0;
}

static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- /* disable SCSI interrupts */
- unsigned short cntr = CNTR_PDMD;
-
- if (!HDATA(instance)->dma_dir)
- cntr |= CNTR_DDIR;
-
- DMA(instance)->CNTR = cntr;
- mb(); /* make sure CNTR is updated before next IO */
-
- /* flush if we were reading */
- if (HDATA(instance)->dma_dir) {
- DMA(instance)->FLUSH = 1;
- mb(); /* don't allow prefetch */
- while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
- barrier();
- mb(); /* no IO until FLUSH is done */
- }
-
- /* clear a possible interrupt */
- /* I think that this CINT is only necessary if you are
- * using the terminal count features. HM 7 Mar 1994
- */
- DMA(instance)->CINT = 1;
-
- /* stop DMA */
- DMA(instance)->SP_DMA = 1;
- mb(); /* make sure DMA is stopped before next IO */
-
- /* restore the CONTROL bits (minus the direction flag) */
- DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
- mb(); /* make sure CNTR is updated before next IO */
-
- /* copy from a bounce buffer, if necessary */
- if (status && HDATA(instance)->dma_bounce_buffer) {
- if (SCpnt) {
- if (HDATA(instance)->dma_dir && SCpnt)
- memcpy (SCpnt->SCp.ptr,
- HDATA(instance)->dma_bounce_buffer,
- SCpnt->SCp.this_residual);
- kfree (HDATA(instance)->dma_bounce_buffer);
- HDATA(instance)->dma_bounce_buffer = NULL;
- HDATA(instance)->dma_bounce_len = 0;
- } else {
- kfree (HDATA(instance)->dma_bounce_buffer);
- HDATA(instance)->dma_bounce_buffer = NULL;
- HDATA(instance)->dma_bounce_len = 0;
- }
- }
-}
+ struct WD33C93_hostdata *hdata = shost_priv(instance);
+ a3000_scsiregs *regs = (a3000_scsiregs *)(instance->base);

-static int __init a3000_detect(struct scsi_host_template *tpnt)
-{
- wd33c93_regs regs;
+ /* disable SCSI interrupts */
+ unsigned short cntr = CNTR_PDMD;

- if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI))
- return 0;
- if (!request_mem_region(0xDD0000, 256, "wd33c93"))
- return 0;
+ if (!hdata->dma_dir)
+ cntr |= CNTR_DDIR;

- tpnt->proc_name = "A3000";
- tpnt->proc_info = &wd33c93_proc_info;
-
- a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata));
- if (a3000_host == NULL)
- goto fail_register;
-
- a3000_host->base = ZTWO_VADDR(0xDD0000);
- a3000_host->irq = IRQ_AMIGA_PORTS;
- DMA(a3000_host)->DAWR = DAWR_A3000;
- regs.SASR = &(DMA(a3000_host)->SASR);
- regs.SCMD = &(DMA(a3000_host)->SCMD);
- HDATA(a3000_host)->no_sync = 0xff;
- HDATA(a3000_host)->fast = 0;
- HDATA(a3000_host)->dma_mode = CTRL_DMA;
- wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15);
- if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI",
- a3000_intr))
- goto fail_irq;
- DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN;
-
- return 1;
+ regs->CNTR = cntr;
+ mb(); /* make sure CNTR is updated before next IO */

-fail_irq:
- wd33c93_release();
- scsi_unregister(a3000_host);
-fail_register:
- release_mem_region(0xDD0000, 256);
- return 0;
+ /* flush if we were reading */
+ if (hdata->dma_dir) {
+ regs->FLUSH = 1;
+ mb(); /* don't allow prefetch */
+ while (!(regs->ISTR & ISTR_FE_FLG))
+ barrier();
+ mb(); /* no IO until FLUSH is done */
+ }
+
+ /* clear a possible interrupt */
+ /* I think that this CINT is only necessary if you are
+ * using the terminal count features. HM 7 Mar 1994
+ */
+ regs->CINT = 1;
+
+ /* stop DMA */
+ regs->SP_DMA = 1;
+ mb(); /* make sure DMA is stopped before next IO */
+
+ /* restore the CONTROL bits (minus the direction flag) */
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+ mb(); /* make sure CNTR is updated before next IO */
+
+ /* copy from a bounce buffer, if necessary */
+ if (status && hdata->dma_bounce_buffer) {
+ if (SCpnt) {
+ if (hdata->dma_dir && SCpnt)
+ memcpy(SCpnt->SCp.ptr,
+ hdata->dma_bounce_buffer,
+ SCpnt->SCp.this_residual);
+ kfree(hdata->dma_bounce_buffer);
+ hdata->dma_bounce_buffer = NULL;
+ hdata->dma_bounce_len = 0;
+ } else {
+ kfree(hdata->dma_bounce_buffer);
+ hdata->dma_bounce_buffer = NULL;
+ hdata->dma_bounce_len = 0;
+ }
+ }
}

static int a3000_bus_reset(struct scsi_cmnd *cmd)
@@ -213,13 +168,11 @@ static int a3000_bus_reset(struct scsi_cmnd *cmd)
return SUCCESS;
}

-#define HOSTS_C
-
-static struct scsi_host_template driver_template = {
- .proc_name = "A3000",
+static struct scsi_host_template amiga_a3000_scsi_template = {
+ .module = THIS_MODULE,
.name = "Amiga 3000 built-in SCSI",
- .detect = a3000_detect,
- .release = a3000_release,
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "A3000",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = a3000_bus_reset,
@@ -231,16 +184,106 @@ static struct scsi_host_template driver_template = {
.use_clustering = ENABLE_CLUSTERING
};

+static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct Scsi_Host *host;
+ struct WD33C93_hostdata *hdata;
+ int error;
+ wd33c93_regs wdregs;
+ a3000_scsiregs *regs;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ if (!request_mem_region(res->start, resource_size(res), "wd33c93"))
+ return -EBUSY;
+
+ host = scsi_host_alloc(&amiga_a3000_scsi_template,
+ sizeof(struct WD33C93_hostdata));
+ if (!host) {
+ error = -ENOMEM;
+ goto fail_register;
+ }
+
+ host->base = ZTWO_VADDR(res->start);
+ host->irq = IRQ_AMIGA_PORTS;

-#include "scsi_module.c"
+ regs = (a3000_scsiregs *)(host->base);
+ regs->DAWR = DAWR_A3000;

-static int a3000_release(struct Scsi_Host *instance)
+ wdregs.SASR = &regs->SASR;
+ wdregs.SCMD = &regs->SCMD;
+
+ hdata = shost_priv(host);
+ hdata->no_sync = 0xff;
+ hdata->fast = 0;
+ hdata->dma_mode = CTRL_DMA;
+
+ wd33c93_init(host, wdregs, dma_setup, dma_stop, WD33C93_FS_12_15);
+ error = request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED,
+ "A3000 SCSI", host);
+ if (error)
+ goto fail_irq;
+
+ regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+ error = scsi_add_host(host, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, host);
+
+ scsi_scan_host(host);
+ return 0;
+
+fail_host:
+ free_irq(IRQ_AMIGA_PORTS, host);
+fail_irq:
+ scsi_host_put(host);
+fail_register:
+ release_mem_region(res->start, resource_size(res));
+ return error;
+}
+
+static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
{
- wd33c93_release();
- DMA(instance)->CNTR = 0;
- release_mem_region(0xDD0000, 256);
- free_irq(IRQ_AMIGA_PORTS, a3000_intr);
- return 1;
+ struct Scsi_Host *host = platform_get_drvdata(pdev);
+ a3000_scsiregs *regs = (a3000_scsiregs *)(host->base);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ regs->CNTR = 0;
+ scsi_remove_host(host);
+ free_irq(IRQ_AMIGA_PORTS, host);
+ scsi_host_put(host);
+ release_mem_region(res->start, resource_size(res));
+ return 0;
+}
+
+static struct platform_driver amiga_a3000_scsi_driver = {
+ .remove = __exit_p(amiga_a3000_scsi_remove),
+ .driver = {
+ .name = "amiga-a3000-scsi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init amiga_a3000_scsi_init(void)
+{
+ return platform_driver_probe(&amiga_a3000_scsi_driver,
+ amiga_a3000_scsi_probe);
}

+module_init(amiga_a3000_scsi_init);
+
+static void __exit amiga_a3000_scsi_exit(void)
+{
+ platform_driver_unregister(&amiga_a3000_scsi_driver);
+}
+
+module_exit(amiga_a3000_scsi_exit);
+
+MODULE_DESCRIPTION("Amiga 3000 built-in SCSI");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-a3000-scsi");
--
1.6.2.3


\
 
 \ /
  Last update: 2009-04-18 20:57    [W:0.180 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site