lkml.org 
[lkml]   [2009]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: USB storage no-boot regression (bisected)
Greg KH wrote:
> On Tue, Apr 14, 2009 at 05:06:14PM -0400, Jeff Garzik wrote:
>> Once of the x86-64 machines I use for testing runs off of two 2GB USB
>> flash drives, one for Fedora 10 userland, and one for kernel repository
>> + builds.
>>
>> It boots correctly in 2.6.27, but fails with the same symptoms in
>> 2.6.28, 2.6.29 and 2.6.30-rc1:
>>
>> 1) The kernel boots
>> 2) After time passes, kernel begins executing initramfs
>> userland
>> 3) the kernel prints out probe messages for the USB keyboard,
>> SCSI probe messages for the two USB flash drives
>>
>> Or IOW, the keyboard and two SCSI drives appear after initramfs begins
>> booting. And this is for drivers built into the kernel (though same
>> behavior with modules).
>>
>> This no-boot regression is 100% reproducible, and neatly bisects down to
>>
>>> commit 8520f38099ccfdac2147a0852f84ee7a8ee5e197
>>> Author: Alan Stern <stern@rowland.harvard.edu>
>>> Date: Mon Sep 22 14:44:26 2008 -0400
>>>
>>> USB: change hub initialization sleeps to delayed_work
>>>
>>> This patch (as1137) changes the hub_activate() routine, replacing the
>>> power-power-up and debounce delays with delayed_work calls. The idea
>>> is that on systems where the USB stack is compiled into the kernel
>>> rather than built as modules, these delays will no longer block the
>>> boot thread. At least 100 ms is saved for each root hub, which can
>>> add up to a significant savings in total boot time.
>>>
>>> Arjan van de Ven was very pleased to see that this shaved 700 ms off
>>> his computer's boot time. Since his total boot time is on the order
>>> of two seconds, the improvement is considerable.
>>>
>>> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
>>> Tested-by: Arjan van de Ven <arjan@infradead.org>
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
>>
>> My preliminary guess is that this made things --too-- asynchronous, and
>> for some reason userland begins executing before the SCSI core
>> initializes the USB storage as Linux block devices.
>>
>> In any case, I cannot boot because of the above commit :)
>
> Like Arjan said, this is because we are initializing faster now, and
> things are a bit more asynchronous. Use the root_delay boot option,
> that's what I use for my USB-based systems, and have not had a problem
> with that at all.

Is that solution really scalable to every user with a regression severe
enough it prevents them from booting?

When did regressions become an acceptable tradeoff for speed?

This system boots just fine under kernel 2.6.27, 2.6.26, 2.6.25, and so
on. Switch the kernel to 2.6.28, and it no longer boots. A regression
cannot get more clear than that.

Maybe this commit should have been accompanied by one that checks "root=" ?

Jeff






\
 
 \ /
  Last update: 2009-04-15 04:39    [W:0.109 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site