lkml.org 
[lkml]   [2009]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectBUG: unable to handle kernel paging request (mac80211 related??)
Date
From

The following BUG is the result of
rmmod rt2500pci && modprobe rt2500pci && iwconfig wlan0 txpower auto

The only odd thing that preceeded it was that I (10 minutes earlier), tried to
change the wlan rate algo to minstrel from pid using the
/sys/module/mac80211/parameters/ieee80211_default_rc_algo file.

Mac80211 was not a module at the time, and the file went from showing 'pid' to
nothing, so I'm a bit unsure as to what exacly happened. Is
/sys/module/*/parameters/* expected to work on non-modules?


rt2500pci 0000:00:0a.0: found PCI INT A -> IRQ 11
phy21 -> rt2500pci_validate_eeprom: EEPROM recovery - NIC: 0xfff0
phy21 -> rt2x00_set_chip: Info - Chipset detected - rt: 0201, rf: 0003, rev: 00000004.
wmaster0 (rt2500pci): not using net_device_ops yet
phy21: Selected rate control algorithm 'pid'
wlan0 (rt2500pci): not using net_device_ops yet
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
wlan0: authenticate with AP 00:18:39:c0:5f:50
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
phy21 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 10, Aifs: 2, TXop: 0.
wlan0: authenticate with AP 00:18:39:c0:5f:50
wlan0: authenticate with AP 00:18:39:c0:5f:50
wlan0: authenticate with AP 00:18:39:c0:5f:50
wlan0: authentication with AP 00:18:39:c0:5f:50 timed out
rt2500pci 0000:00:0a.0: found PCI INT A -> IRQ 11
phy22 -> rt2500pci_validate_eeprom: EEPROM recovery - NIC: 0xfff0
phy22 -> rt2x00_set_chip: Info - Chipset detected - rt: 0201, rf: 0003, rev: 00000004.
wmaster0 (rt2500pci): not using net_device_ops yet
phy22: Selected rate control algorithm 'pid'
wlan0 (rt2500pci): not using net_device_ops yet
phy22 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
phy22 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 5, CWmax: 10, Aifs: 2, TXop: 0.
ADDRCONF(NETDEV_UP): wlan0: link is not ready
BUG: unable to handle kernel paging request at 8b291c6a
IP: [<cc84d5ad>] 0xcc84d5ad
*pde = 00000000
Oops: 0002 [#1]
last sysfs file: /sys/class/net/wlan0/flags
Modules linked in: rt2500pci rtc cdc_wdm rt2x00pci i2c_piix4 intel_agp pcspkr rt2x00lib eeprom_93cx6 uhci_hcd i2c_core agpgar
t evdev [last unloaded: rt2500pci]

Pid: 27810, comm: iwconfig Not tainted (2.6.29.1 #11) HP Vectra
EIP: 0060:[<cc84d5ad>] EFLAGS: 00010246 CPU: 0
EIP is at 0xcc84d5ad
EAX: c5948d20 EBX: c5948d20 ECX: dc84e2e0 EDX: c5948dac
ESI: c5948dac EDI: c5948dfc EBP: 00000000 ESP: cd5cde00
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process iwconfig (pid: 27810, ti=cd5cc000 task=c58c88a0 task.ti=cd5cc000)
Stack:
dc86f77e c5948d20 c5948160 00000000 dc86eed9 d49e50b4 00000001 c03a07a8
00008b26 c0353429 c5948160 cd5cdf08 c03544e1 cd5cdf08 ffffffa1 c034d5cc
00000000 cd5cdef8 c59c2800 c13197a0 c013748e c0161e94 db4d08fc c015f2b7
Call Trace:
[<dc86f77e>] rt2x00lib_config_antenna+0x74/0xaa [rt2x00lib]
[<dc86eed9>] rt2x00mac_config+0x4f/0x6d [rt2x00lib]
[<c0353429>] ieee80211_hw_config+0x7b/0x82
[<c03544e1>] ieee80211_ioctl_siwtxpower+0x77/0x83
[<c034d5cc>] ioctl_standard_call+0x49/0x286
[<c013748e>] file_read_actor+0x79/0xcf
[<c0161e94>] mnt_want_write+0x8/0x47
[<c015f2b7>] touch_atime+0xe/0xce
[<c034d2ad>] wext_handle_ioctl+0x97/0x17e
[<c035446a>] ieee80211_ioctl_siwtxpower+0x0/0x83
[<c02bc83f>] dev_ioctl+0x532/0x565
[<c0135d64>] find_lock_page+0x10/0x42
[<c0137727>] filemap_fault+0x70/0x2f5
[<c02b25b4>] sock_ioctl+0x0/0x1d1
[<c015a8b6>] vfs_ioctl+0x16/0x48
[<c015ade3>] do_vfs_ioctl+0x40e/0x47f
[<c0143fdf>] handle_mm_fault+0x1f6/0x462
[<c02b1372>] sock_map_fd+0x46/0x50
[<c02b1ce0>] sys_socket+0x3f/0x52
[<c015ae80>] sys_ioctl+0x2c/0x42
[<c0102945>] sysenter_do_call+0x12/0x25
[<c0360000>] __ieee80211_rx_handle_packet+0x24e/0x646
Code: d7 5c 7d 72 35 51 00 00 28 68 5a 4e 68 3c 4e 68 13 4e 75 4d d8 5c 7d 72 36 51 00 00 28 68 86 4e 6a f8 07 00 00 4e 68 88
4e 75 4d <d9> 5c 7d 72 37 51 00 00 28 68 3c 4e 68 11 4e 68 99 4e 75 4d da
EIP: [<cc84d5ad>] 0xcc84d5ad SS:ESP 0068:cd5cde00
---[ end trace 469062b162cecfcc ]---






\
 
 \ /
  Last update: 2009-04-13 11:09    [W:0.215 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site