lkml.org 
[lkml]   [2009]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: High latency on /sys/class/thermal
    acpidump output attached.

    I found no latency on battery iterface, included is another poke at the
    thermal zone for comparison.

    This problem is still present, but at the moment, I shut down the
    sensors-applet on the gnome panel, so that it no longer makes
    gnome-panel stall.

    $ time cat /sys/class/thermal/thermal_zone0/temp
    49000

    real 0m13.476s
    user 0m0.001s
    sys 0m0.001s
    $ time cat /sys/class/power_supply/BAT0/*
    0
    29
    0
    0
    cat: /sys/class/power_supply/BAT0/device: Is a directory
    582640000
    65120000
    18710000
    SMP-SONY
    04ZL
    cat: /sys/class/power_supply/BAT0/power: Is a directory
    0
    0
    1
    Full
    cat: /sys/class/power_supply/BAT0/subsystem: Is a directory
    Li-ion
    270
    Battery
    PHYSDEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0b/PNP0C09:00/ACPI0001:00/ACPI0002:00
    PHYSDEVBUS=acpi
    PHYSDEVDRIVER=sbs
    POWER_SUPPLY_NAME=BAT0
    POWER_SUPPLY_TYPE=Battery
    POWER_SUPPLY_STATUS=Full
    POWER_SUPPLY_PRESENT=1
    POWER_SUPPLY_TECHNOLOGY=Li-ion
    POWER_SUPPLY_VOLTAGE_MIN_DESIGN=14800000
    POWER_SUPPLY_VOLTAGE_NOW=15611000
    POWER_SUPPLY_CURRENT_NOW=0
    POWER_SUPPLY_CURRENT_AVG=0
    POWER_SUPPLY_POWER_NOW=0
    POWER_SUPPLY_POWER_AVG=0
    POWER_SUPPLY_CAPACITY=29
    POWER_SUPPLY_ENERGY_FULL_DESIGN=65120000
    POWER_SUPPLY_ENERGY_FULL=582640000
    POWER_SUPPLY_ENERGY_NOW=18710000
    POWER_SUPPLY_TEMP=270
    POWER_SUPPLY_MODEL_NAME=04ZL
    POWER_SUPPLY_MANUFACTURER=SMP-SONY
    14800000
    15611000

    real 0m0.110s
    user 0m0.001s
    sys 0m0.004s


    On Mon, 13 Apr 2009 09:43:42 +0800
    Zhang Rui <rui.zhang@intel.com> wrote:

    > this sounds like an EC problem to me. please attach the acpidump
    > output. is there a long latency when you poke other ACPI devices, say
    > battery?
    >
    > thanks,
    > rui
    >
    > On Mon, 2009-04-13 at 00:03 +0800, Tiago Simões Batista wrote:
    > > On Sat, 11 Apr 2009 23:16:11 +0100
    > > Tiago Simões Batista <tiagosbatista@gmail.com> wrote:
    > >
    > > > Sorry about the noise, by brain was stopped when I sent the last
    > > > mail, please ignore the From address, it is wrong!
    > > >
    > > > On Sat, 11 Apr 2009 12:14:16 -0700
    > > > Andrew Morton <akpm@linux-foundation.org> wrote:
    > > >
    > > > > (cc linux-acpi)
    > > > >
    > > > > On Sat, 11 Apr 2009 15:56:12 +0100 "Tiago Sim__es Batista"
    > > > > <tiagosbatista@gmail.com> wrote:
    > > > >
    > > > > > Hi all
    > > > > >
    > > > > > Yesterday, I recompiled my kernel (git + tuxonice)
    > > > > > v2.6.30-rc1-1002-gac91f91, there were a couple of issues, the
    > > > > > main one is ilustrated bellow.
    > > > > >
    > > > > > I am not familiar with the kernel code, but if you give me
    > > > > > some pointers, I will be glad to investigate this further
    > > > > >
    > > > > > $time cat /sys/class/thermal/thermal_zone0/temp
    > > > > > 34000
    > > > > >
    > > > > > real 0m6.613s
    > > > > > user 0m0.000s
    > > > > > sys 0m0.001s
    > > > > >
    > > > >
    > > > > Is this a regression? Was 2.6.29 OK?
    > > > >
    > > > > Thanks.
    > > >
    > > > My last kernel was fine:
    > > >
    > > > $ time cat /sys/class/thermal/thermal_zone0/temp
    > > > 48000
    > > >
    > > > real 0m0.007s
    > > > user 0m0.001s
    > > > sys 0m0.007s
    > > >
    > > >
    > > > I also forgot to add some information about my kernels...
    > > >
    > > > The good one is 2.6.29 + tuxonice as it was the day after the
    > > > 2.6.29 kernel was released.
    > > >
    > > > The bad one is a pull from linus tree on april the 9th plus
    > > > tuxonice on the same day
    > > >
    > > > from git (hope this helps):
    > > > $ git describe v2.6.29-tiago2-ice
    > > > v2.6.29-836-g00492ed
    > > > $ git describe v2.6.30-rc1-tiago1-ice
    > > > v2.6.30-rc1-1002-gac91f91
    > > >
    > > >
    > > > If tuxonice is a suspect, I will be glad to remove it and
    > > > recompile. If I have the time later this weekend, and nothing was
    > > > found, I will try to bisect this.
    > > >
    > >
    > > Here are some results from the bisect:
    > > The metric I used to mark a revision as good/bad was
    > > $ time for ((i =0; i < 100; i++)); do
    > > cat /sys/class/thermal/thermal_zone0/temp > /dev/null;
    > > done
    > >
    > > The bad ones take forever, i never even finished one bad run. The
    > > good ones take about half a second.
    > >
    > > When I checked out revisions v2.6.29-148-g33526a5 and
    > > v2.6.29-159-g8a3f257, it took almost 2 secons to run the command,
    > > so I think some of the latency my have been introduced around
    > > these. Yet, I still marked them as good.
    > >
    > > The resut was:
    > > 478c6a43fcbc6c11609f8cee7c7b57223907754f is first bad commit
    > > witch is a merge. I am out of ideas...
    > >
    > > I forgot to ask, am I the only one experiencing this? I am using a
    > > TravelMate 4000 with the intel graphics chip, can anyone reproduce
    > > this? If no one can reproduce this, I can still test a vanilla
    > > kernel to remove TOI from the equation!
    > >
    > > Tiago
    > >
    > >
    > > Below is the bisect log:
    > > $ git bisect log
    > > git bisect start
    > > # bad: [ac91f917d7ed7d1ebe14532ee137fcd759b4406d] Merge branch
    > > 'all' into all-tuxonice git bisect bad
    > > ac91f917d7ed7d1ebe14532ee137fcd759b4406d # good:
    > > [178a426510a901d9335f39d3391ae5e8628a36d1] Merge branch 'tuxonice'
    > > into all-tuxonice git bisect good
    > > 178a426510a901d9335f39d3391ae5e8628a36d1 # good:
    > > [fdf9c9979a355916433262ea5e5e64bed5def86e] V4L/DVB (10465):
    > > dsbr100: Add few lost mutex locks. git bisect good
    > > fdf9c9979a355916433262ea5e5e64bed5def86e # good:
    > > [edbd606c4671fcd439164c8d63e896044d706156] Staging: wlan-ng:
    > > Replace WLAN_LOG_ERROR() with printk() git bisect good
    > > edbd606c4671fcd439164c8d63e896044d706156 # good:
    > > [3516c6a8dc0b1153c611c4cf0dc4a51631f052bb] Merge
    > > git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
    > > git bisect good 3516c6a8dc0b1153c611c4cf0dc4a51631f052bb # bad:
    > > [3989203290fba6fdf6bc4825fbf6526e1bf17977] Merge
    > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 git
    > > bisect bad 3989203290fba6fdf6bc4825fbf6526e1bf17977 # bad:
    > > [d7ca6f8cdffa5765e486edb3dada9121fba8e6aa] Merge branch 'for-linus'
    > > of git://git.o-hand.com/linux-rpurdie-backlight git bisect bad
    > > d7ca6f8cdffa5765e486edb3dada9121fba8e6aa # good:
    > > [3b4dadf05d177289c279c50030c7c75e004952bb] Merge branch
    > > 'acpi_enforce_resources' into release git bisect good
    > > 3b4dadf05d177289c279c50030c7c75e004952bb # bad:
    > > [32fb6c17566ec66de87324a834c7776f40e35e78] Merge branch 'release'
    > > of
    > > git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
    > > git bisect bad 32fb6c17566ec66de87324a834c7776f40e35e78 # good:
    > > [45e36c1666aa6c8b0c538abcf984b336184d8c3f] Merge
    > > git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 git
    > > bisect good 45e36c1666aa6c8b0c538abcf984b336184d8c3f # good:
    > > [33526a53600ac887d100e3c9b4be3637ac8ae3a5] Merge branch 'x2apic'
    > > into release git bisect good
    > > 33526a53600ac887d100e3c9b4be3637ac8ae3a5 # good:
    > > [c542aadeb4700bc316834d862d52ba3d2664f13a] panasonic-laptop: Fix
    > > autoloading git bisect good
    > > c542aadeb4700bc316834d862d52ba3d2664f13a # bad:
    > > [478c6a43fcbc6c11609f8cee7c7b57223907754f] Merge branch 'linus'
    > > into release git bisect bad
    > > 478c6a43fcbc6c11609f8cee7c7b57223907754f # good:
    > > [15065531c1c5902775ae3ade24eb37d0e688353b] toshiba-acpi: remove
    > > MAINTAINERS entry git bisect good
    > > 15065531c1c5902775ae3ade24eb37d0e688353b # good:
    > > [8a3f257c704e02aee9869decd069a806b45be3f1] Merge branch 'misc' into
    > > release git bisect good 8a3f257c704e02aee9869decd069a806b45be3f1
    >

    [unhandled content-type:application/octet-stream]
    \
     
     \ /
      Last update: 2009-04-13 04:31    [W:0.041 / U:61.740 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site