lkml.org 
[lkml]   [2009]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 17/18] Blackfin Serial Driver: Fix bug - Enable hardware based CTS and RTS for bf548.
On Fri,  6 Mar 2009 14:42:59 +0800
Bryan Wu <cooloney@kernel.org> wrote:

> From: Sonic Zhang <sonic.zhang@analog.com>
>
> Both software emulated and hardware based CTS and RTS are enabled in
> serial driver.
>
> The CTS RTS PIN connection on BF548 UART port is defined as a modem
> device not as a host device. In order to test it under Linux, please
> nake a cross UART cable to exchange CTS and RTS signal.
>
> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
> Signed-off-by: Bryan Wu <cooloney@kernel.org>
> ---
> .../mach-bf518/include/mach/bfin_serial_5xx.h | 10 +-
> .../mach-bf527/include/mach/bfin_serial_5xx.h | 10 +-
> .../mach-bf533/include/mach/bfin_serial_5xx.h | 9 +-
> .../mach-bf537/include/mach/bfin_serial_5xx.h | 10 +-
> .../mach-bf538/include/mach/bfin_serial_5xx.h | 10 +-
> .../mach-bf548/include/mach/bfin_serial_5xx.h | 72 ++++-----
> .../mach-bf561/include/mach/bfin_serial_5xx.h | 9 +-
> drivers/serial/Kconfig | 26 +++-
> drivers/serial/bfin_5xx.c | 169 ++++++++++++++------
> 9 files changed, 209 insertions(+), 116 deletions(-)

This is a huge patch for us to be merging into -rc7.

> --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
> +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
> @@ -53,9 +53,9 @@
> #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
> #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
>
> -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
> -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
> -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
> +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
> +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
> +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
> #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
> #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
>
> @@ -74,6 +74,7 @@
> struct bfin_serial_port {
> struct uart_port port;
> unsigned int old_status;
> + int status_irq;
> unsigned int lsr;

whitepace bustage in here.


\
 
 \ /
  Last update: 2009-03-06 23:43    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site