lkml.org 
[lkml]   [2009]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] OMAP: HSMMC: Initialize hsmmc controller registers when resuming
* Adrian Hunter <adrian.hunter@nokia.com> [090302 04:27]:
> From a2ad80abeb9550782d4962472980e47df4055434 Mon Sep 17 00:00:00 2001
> From: Kim Kyuwon <chammoru@gmail.com>
> Date: Fri, 20 Feb 2009 13:10:08 +0100
> Subject: [PATCH] OMAP: HSMMC: Initialize hsmmc controller registers when resuming
>
> Most registers lose its state when the processor wakes up from sleep state.
> Thus registers should be initialized, when the processor wakes up. However the
> current hsmmc 'resume' function doesn't consider this issue and finally makes
> deadlock. So this patch fixes this problem.
>
> Signed-off-by: Kim Kyuwon <chammoru@gmail.com>
> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>

Sounds like there's no rush to get this into mainline until during the
next merge window as we're still missing most of the 24xx and 34xx PM code.

Acked-by: Tony Lindgren <tony@atomide.com>


> ---
>
>
>
>
> Here is Kim Kyuwon's patch without the 'host is never null in suspend / resume'
> assumption, and leaving the issue of SDBP for later.
>
>
>
>
>
>
> drivers/mmc/host/omap_hsmmc.c | 55 +++++++++++++++++++++++-----------------
> 1 files changed, 32 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index a631c81..1047cb5 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -56,6 +56,7 @@
> #define SDVS18 (0x5 << 9)
> #define SDVS30 (0x6 << 9)
> #define SDVS33 (0x7 << 9)
> +#define SDVS_MASK 0x00000E00
> #define SDVSCLR 0xFFFFF1FF
> #define SDVSDET 0x00000400
> #define AUTOIDLE 0x1
> @@ -891,6 +892,34 @@ static int omap_hsmmc_get_ro(struct mmc_host *mmc)
> return pdata->slots[0].get_ro(host->dev, 0);
> }
>
> +static void omap_hsmmc_init(struct mmc_omap_host *host)
> +{
> + u32 hctl, capa, value;
> +
> + /* Only MMC1 supports 3.0V */
> + if (host->id == OMAP_MMC1_DEVID) {
> + hctl = SDVS30;
> + capa = VS30 | VS18;
> + } else {
> + hctl = SDVS18;
> + capa = VS18;
> + }
> +
> + value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK;
> + OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl);
> +
> + value = OMAP_HSMMC_READ(host->base, CAPA);
> + OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
> +
> + /* Set the controller to AUTO IDLE mode */
> + value = OMAP_HSMMC_READ(host->base, SYSCONFIG);
> + OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE);
> +
> + /* Set SD bus power bit */
> + value = OMAP_HSMMC_READ(host->base, HCTL);
> + OMAP_HSMMC_WRITE(host->base, HCTL, value | SDBP);
> +}
> +
> static struct mmc_host_ops mmc_omap_ops = {
> .request = omap_mmc_request,
> .set_ios = omap_mmc_set_ios,
> @@ -906,7 +935,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
> struct mmc_omap_host *host = NULL;
> struct resource *res;
> int ret = 0, irq;
> - u32 hctl, capa;
>
> if (pdata == NULL) {
> dev_err(&pdev->dev, "Platform Data is missing\n");
> @@ -1011,28 +1039,7 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
> if (pdata->slots[host->slot_id].wires >= 4)
> mmc->caps |= MMC_CAP_4_BIT_DATA;
>
> - /* Only MMC1 supports 3.0V */
> - if (host->id == OMAP_MMC1_DEVID) {
> - hctl = SDVS30;
> - capa = VS30 | VS18;
> - } else {
> - hctl = SDVS18;
> - capa = VS18;
> - }
> -
> - OMAP_HSMMC_WRITE(host->base, HCTL,
> - OMAP_HSMMC_READ(host->base, HCTL) | hctl);
> -
> - OMAP_HSMMC_WRITE(host->base, CAPA,
> - OMAP_HSMMC_READ(host->base, CAPA) | capa);
> -
> - /* Set the controller to AUTO IDLE mode */
> - OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
> - OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
> -
> - /* Set SD bus power bit */
> - OMAP_HSMMC_WRITE(host->base, HCTL,
> - OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
> + omap_hsmmc_init(host);
>
> /* Request IRQ for MMC operations */
> ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
> @@ -1222,6 +1229,8 @@ static int omap_mmc_resume(struct platform_device *pdev)
> dev_dbg(mmc_dev(host->mmc),
> "Enabling debounce clk failed\n");
>
> + omap_hsmmc_init(host);
> +
> if (host->pdata->resume) {
> ret = host->pdata->resume(&pdev->dev, host->slot_id);
> if (ret)
> --
> 1.5.6.3


\
 
 \ /
  Last update: 2009-03-02 17:47    [W:0.068 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site