lkml.org 
[lkml]   [2009]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] parport netmos 9845 & 9855 1P4S fixes
Hello list,

--

netmos serial/parallel adapters come in different flavour differing only
by the number of parallel and serial ports, which are encoded in the
subdevice ID.

Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S,
and works only by side-effect for the first parallel port of a 2P2S,
as it is found by reading the second addr entry of
(struct parport_pc_pci) cards[netmos_9855], which is not initialized.

netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used
for a 9845 1P4S should also be fixed when there are 4 serial ports
because it currently gives 2 as BAR index for the parallel port,
while, in this case, BAR 2 is the 3rd serial port and the parallel port
is at BAR 4.

I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support,
by creating and using a netmos_9855_2p entry for 9855 boards with 2 parallel
ports for 9855 2P2S and 9855 2P0S boards,
and by allowing netmos_parallel_init to change not only the number of
parallel ports (0 or 1), but also the BAR index of the parallel port
when the serial ports are before the parallel port.

PS: the netmos_9855_2p entry in
(struct pciserial_board) pci_parport_serial_boards[] is needed because
netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4
based on the number of parallel ports in the card.

Tested with a 9845 1P4S and a 9855 1P4S board.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>

diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -30,6 +30,7 @@ enum parport_pc_pci_cards {
titan_210l,
netmos_9xx5_combo,
netmos_9855,
+ netmos_9855_2p,
avlab_1s1p,
avlab_1s2p,
avlab_2s1p,
@@ -62,7 +63,7 @@ struct parport_pc_pci {
struct parport_pc_pci *card, int failed);
};

-static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma)
+static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
{
/* the rule described below doesn't hold for this device */
if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
@@ -74,9 +75,17 @@ static int __devinit netmos_parallel_ini
* and serial ports. The form is 0x00PS, where <P> is the number of
* parallel ports and <S> is the number of serial ports.
*/
- card->numports = (dev->subsystem_device & 0xf0) >> 4;
- if (card->numports > ARRAY_SIZE(card->addr))
- card->numports = ARRAY_SIZE(card->addr);
+ par->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (par->numports > ARRAY_SIZE(par->addr))
+ par->numports = ARRAY_SIZE(par->addr);
+ /*
+ * This function is currently only called for cards with up to
+ * one parallel port.
+ * Parallel port BAR is either before or after serial ports BARS;
+ * hence, lo should be either 0 or equal to the number of serial ports.
+ */
+ if (par->addr[0].lo != 0)
+ par->addr[0].lo = dev->subsystem_device & 0xf;
return 0;
}

@@ -84,7 +93,8 @@ static struct parport_pc_pci cards[] __d
/* titan_110l */ { 1, { { 3, -1 }, } },
/* titan_210l */ { 1, { { 3, -1 }, } },
/* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
- /* netmos_9855 */ { 1, { { 2, -1 }, }, netmos_parallel_init },
+ /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
+ /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
/* avlab_1s1p */ { 1, { { 1, 2}, } },
/* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
/* avlab_2s1p */ { 1, { { 2, 3}, } },
@@ -109,6 +119,10 @@ static struct pci_device_id parport_seri
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+ 0x1000, 0x0020, 0, 0, netmos_9855_2p },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+ 0x1000, 0x0022, 0, 0, netmos_9855_2p },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
@@ -192,6 +206,12 @@ static struct pciserial_board pci_parpor
.uart_offset = 8,
},
[netmos_9855] = {
+ .flags = FL_BASE2 | FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [netmos_9855_2p] = {
.flags = FL_BASE4 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,

\
 
 \ /
  Last update: 2009-03-19 19:17    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site