lkml.org 
[lkml]   [2009]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/10] PM: Change suspend code ordering
Date
From: Rafael J. Wysocki <rjw@sisk.pl>

Change the ordering of the suspend core code so that the platform
"prepare" callback is executed and the nonboot CPUs are disabled
after calling device drivers' "late suspend" methods.

This change will allow us to rework the PCI PM core so that the power
state of devices is changed in the "late" phase of suspend (and
analogously in the "early" phase of resume), which in turn will allow
us to avoid the race condition where a device using shared interrupts
is put into a low power state with interrupts enabled and then an
interrupt (for another device) comes in and confuses its driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
kernel/power/main.c | 38 ++++++++++++++++++++++----------------
1 file changed, 22 insertions(+), 16 deletions(-)

Index: linux-2.6/kernel/power/main.c
===================================================================
--- linux-2.6.orig/kernel/power/main.c
+++ linux-2.6/kernel/power/main.c
@@ -297,6 +297,19 @@ static int suspend_enter(suspend_state_t
goto Done;
}

+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ goto Power_up_devices;
+ }
+
+ if (suspend_test(TEST_PLATFORM))
+ goto Platfrom_finish;
+
+ error = disable_nonboot_cpus();
+ if (error || suspend_test(TEST_CPUS))
+ goto Enable_cpus;
+
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());

@@ -310,6 +323,14 @@ static int suspend_enter(suspend_state_t
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());

+ Enable_cpus:
+ enable_nonboot_cpus();
+
+ Platfrom_finish:
+ if (suspend_ops->finish)
+ suspend_ops->finish();
+
+ Power_up_devices:
device_power_up(PMSG_RESUME);

Done:
@@ -346,23 +367,8 @@ int suspend_devices_and_enter(suspend_st
if (suspend_test(TEST_DEVICES))
goto Recover_platform;

- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
- if (error)
- goto Resume_devices;
- }
-
- if (suspend_test(TEST_PLATFORM))
- goto Finish;
+ suspend_enter(state);

- error = disable_nonboot_cpus();
- if (!error && !suspend_test(TEST_CPUS))
- suspend_enter(state);
-
- enable_nonboot_cpus();
- Finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
Resume_devices:
suspend_test_start();
device_resume(PMSG_RESUME);

\
 
 \ /
  Last update: 2009-03-11 11:01    [W:0.072 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site