lkml.org 
[lkml]   [2009]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] Fix e820 end address with EFI
    This dmesg is from a 2.6.25 kernel which works fine. I can gather other 
    debugging info from the booting kernels if needed. But its a challenge
    to debug the bad kernel being efifb is initialized very late (so you
    never even get to the video initialization and cant see any logged
    messages) and since its a MacBook I dont have a real serial port for
    serial console. The efi map is for MacBook has a different layout from
    other EFI systems I have to test on. 2.6.29 kernel works on every EFI
    system I have except MacBook.

    Brian
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.25-0.204.rc8.git4.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Mon Apr 7 10:25:52 EDT 2008
    Command line: ro root=UUID=aa77bc4f-ce1e-46c2-ab72-8e693c722055
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
    BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
    BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007eef0000 (usable)
    BIOS-e820: 000000007eef0000 - 000000007f0f1000 (ACPI NVS)
    BIOS-e820: 000000007f0f1000 - 000000007fe53000 (usable)
    BIOS-e820: 000000007fe53000 - 000000007fe79000 (reserved)
    BIOS-e820: 000000007fe79000 - 000000007fe89000 (usable)
    BIOS-e820: 000000007fe89000 - 000000007feb3000 (reserved)
    BIOS-e820: 000000007feb3000 - 000000007feb9000 (usable)
    BIOS-e820: 000000007feb9000 - 000000007febf000 (reserved)
    BIOS-e820: 000000007febf000 - 000000007fed2000 (usable)
    BIOS-e820: 000000007fed2000 - 000000007fed4000 (ACPI NVS)
    BIOS-e820: 000000007fed4000 - 000000007fed7000 (ACPI data)
    BIOS-e820: 000000007fed7000 - 000000007feda000 (ACPI NVS)
    BIOS-e820: 000000007feda000 - 000000007fedb000 (ACPI data)
    BIOS-e820: 000000007fedb000 - 000000007feef000 (ACPI NVS)
    BIOS-e820: 000000007feef000 - 000000007feff000 (ACPI data)
    BIOS-e820: 000000007feff000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
    Entering add_active_range(0, 0, 143) 0 entries of 3200 used
    Entering add_active_range(0, 144, 160) 1 entries of 3200 used
    Entering add_active_range(0, 256, 519920) 2 entries of 3200 used
    Entering add_active_range(0, 520433, 523859) 3 entries of 3200 used
    Entering add_active_range(0, 523897, 523913) 4 entries of 3200 used
    Entering add_active_range(0, 523955, 523961) 5 entries of 3200 used
    Entering add_active_range(0, 523967, 523986) 6 entries of 3200 used
    end_pfn_map = 1048528
    EFI v1.10 by Apple
    ACPI=0x7fefe000 ACPI 2.0=0x7fefe014 SMBIOS=0x7fed3000
    Kernel-defined memdescdoesn't match the one from EFI!
    EFI: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008b000) (0MB)
    EFI: mem01: type=2, attr=0xf, range=[0x000000000008b000-0x000000000008d000) (0MB)
    EFI: mem02: type=7, attr=0xf, range=[0x000000000008d000-0x000000000008f000) (0MB)
    EFI: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
    EFI: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
    EFI: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x000000007b677000) (1973MB)
    EFI: mem06: type=2, attr=0xf, range=[0x000000007b677000-0x000000007b679000) (0MB)
    EFI: mem07: type=7, attr=0xf, range=[0x000000007b679000-0x000000007b67c000) (0MB)
    EFI: mem08: type=2, attr=0xf, range=[0x000000007b67c000-0x000000007c728000) (16MB)
    EFI: mem09: type=1, attr=0xf, range=[0x000000007c728000-0x000000007c760000) (0MB)
    EFI: mem10: type=2, attr=0xf, range=[0x000000007c760000-0x000000007c7ea000) (0MB)
    EFI: mem11: type=4, attr=0xf, range=[0x000000007c7ea000-0x000000007ca57000) (2MB)
    EFI: mem12: type=2, attr=0xf, range=[0x000000007ca57000-0x000000007ca9a000) (0MB)
    EFI: mem13: type=1, attr=0xf, range=[0x000000007ca9a000-0x000000007cab6000) (0MB)
    EFI: mem14: type=7, attr=0xf, range=[0x000000007cab6000-0x000000007d39c000) (8MB)
    EFI: mem15: type=2, attr=0xf, range=[0x000000007d39c000-0x000000007d70d000) (3MB)
    EFI: mem16: type=4, attr=0xf, range=[0x000000007d70d000-0x000000007ea40000) (19MB)
    EFI: mem17: type=7, attr=0xf, range=[0x000000007ea40000-0x000000007ea4f000) (0MB)
    EFI: mem18: type=4, attr=0xf, range=[0x000000007ea4f000-0x000000007ea78000) (0MB)
    EFI: mem19: type=7, attr=0xf, range=[0x000000007ea78000-0x000000007ea79000) (0MB)
    EFI: mem20: type=4, attr=0xf, range=[0x000000007ea79000-0x000000007eb0d000) (0MB)
    EFI: mem21: type=7, attr=0xf, range=[0x000000007eb0d000-0x000000007ec02000) (0MB)
    EFI: mem22: type=4, attr=0xf, range=[0x000000007ec02000-0x000000007eef0000) (2MB)
    EFI: mem23: type=10, attr=0xf, range=[0x000000007eef0000-0x000000007f0f1000) (2MB)
    EFI: mem24: type=4, attr=0xf, range=[0x000000007f0f1000-0x000000007f1cc000) (0MB)
    EFI: mem25: type=7, attr=0xf, range=[0x000000007f1cc000-0x000000007f1cd000) (0MB)
    EFI: mem26: type=4, attr=0xf, range=[0x000000007f1cd000-0x000000007fc72000) (10MB)
    EFI: mem27: type=7, attr=0xf, range=[0x000000007fc72000-0x000000007fcd0000) (0MB)
    EFI: mem28: type=3, attr=0xf, range=[0x000000007fcd0000-0x000000007fe4a000) (1MB)
    EFI: mem29: type=7, attr=0xf, range=[0x000000007fe4a000-0x000000007fe53000) (0MB)
    EFI: mem30: type=5, attr=0x800000000000000f, range=[0x000000007fe53000-0x000000007fe79000) (0MB)
    EFI: mem31: type=7, attr=0xf, range=[0x000000007fe79000-0x000000007fe89000) (0MB)
    EFI: mem32: type=6, attr=0x800000000000000f, range=[0x000000007fe89000-0x000000007feb3000) (0MB)
    EFI: mem33: type=7, attr=0xf, range=[0x000000007feb3000-0x000000007feb9000) (0MB)
    EFI: mem34: type=0, attr=0xf, range=[0x000000007feb9000-0x000000007febf000) (0MB)
    EFI: mem35: type=7, attr=0xf, range=[0x000000007febf000-0x000000007fed2000) (0MB)
    EFI: mem36: type=10, attr=0xf, range=[0x000000007fed2000-0x000000007fed4000) (0MB)
    EFI: mem37: type=9, attr=0xf, range=[0x000000007fed4000-0x000000007fed7000) (0MB)
    EFI: mem38: type=10, attr=0xf, range=[0x000000007fed7000-0x000000007feda000) (0MB)
    EFI: mem39: type=9, attr=0xf, range=[0x000000007feda000-0x000000007fedb000) (0MB)
    EFI: mem40: type=10, attr=0xf, range=[0x000000007fedb000-0x000000007feef000) (0MB)
    EFI: mem41: type=9, attr=0xf, range=[0x000000007feef000-0x000000007feff000) (0MB)
    EFI: mem42: type=6, attr=0x800000000000000f, range=[0x000000007feff000-0x000000007ff00000) (0MB)
    EFI: mem43: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    EFI: mem44: type=0, attr=0x8000000000000000, range=[0x000000007ff00000-0x0000000080000000) (1MB)
    EFI: mem45: type=11, attr=0x8000000000000000, range=[0x00000000f00f8000-0x00000000f00f9000) (0MB)
    EFI: mem46: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    EFI: mem47: type=11, attr=0x8000000000000000, range=[0x00000000fffa0000-0x00000000fffd0000) (0MB)
    DMI 2.4 present.
    ACPI: RSDP 7FEFE014, 0024 (r2 APPLE )
    ACPI: XSDT 7FEFE1C0, 007C (r1 APPLE Apple00 70 1000013)
    ACPI: FACP 7FEFC000, 00F4 (r3 APPLE Apple00 70 Loki 5F)
    ACPI: DSDT 7FEF1000, 48A8 (r1 APPLE MacBookP 30001 INTL 20061109)
    ACPI: FACS 7FEDB000, 0040
    ACPI: HPET 7FEFB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: APIC 7FEFA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: MCFG 7FEF9000, 003C (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ASF! 7FEF8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
    ACPI: SBST 7FEF7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: ECDT 7FEF6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
    ACPI: SSDT 7FEDA000, 0137 (r1 APPLE SataAhci 1000 INTL 20061109)
    ACPI: SSDT 7FED6000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
    ACPI: SSDT 7FED5000, 025F (r1 APPLE Cpu0Tst 3000 INTL 20061109)
    ACPI: SSDT 7FED4000, 00A6 (r1 APPLE Cpu1Tst 3000 INTL 20061109)
    ACPI: DMI detected: Apple
    No NUMA configuration found
    Faking a node at 0000000000000000-000000007fed2000
    Entering add_active_range(0, 0, 143) 0 entries of 3200 used
    Entering add_active_range(0, 144, 160) 1 entries of 3200 used
    Entering add_active_range(0, 256, 519920) 2 entries of 3200 used
    Entering add_active_range(0, 520433, 523859) 3 entries of 3200 used
    Entering add_active_range(0, 523897, 523913) 4 entries of 3200 used
    Entering add_active_range(0, 523955, 523961) 5 entries of 3200 used
    Entering add_active_range(0, 523967, 523986) 6 entries of 3200 used
    Bootmem setup node 0 0000000000000000-000000007fed2000
    NODE_DATA [000000000000c000 - 0000000000013fff]
    bootmap [0000000000014000 - 0000000000023fdf] pages 10
    early res: 0 [0-fff] BIOS data page
    early res: 1 [6000-7fff] SMP_TRAMPOLINE
    early res: 2 [200000-75a73b] TEXT DATA BSS
    early res: 3 [7d39c000-7d70cd69] RAMDISK
    early res: 4 [8000-bfff] PGTABLE
    No mptable found.
    [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
    [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
    [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
    [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
    [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
    [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
    [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
    [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
    [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
    [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
    [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
    [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
    [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
    [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1048576
    Movable zone start PFN for each node
    early_node_map[7] active PFN ranges
    0: 0 -> 143
    0: 144 -> 160
    0: 256 -> 519920
    0: 520433 -> 523859
    0: 523897 -> 523913
    0: 523955 -> 523961
    0: 523967 -> 523986
    On node 0 totalpages: 523290
    DMA zone: 56 pages used for memmap
    DMA zone: 1377 pages reserved
    DMA zone: 2566 pages, LIFO batch:0
    DMA32 zone: 7107 pages used for memmap
    DMA32 zone: 512184 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    PM: Registered nosave memory: 000000000008f000 - 0000000000090000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
    PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
    PM: Registered nosave memory: 000000007eef0000 - 000000007f0f1000
    PM: Registered nosave memory: 000000007fe53000 - 000000007fe79000
    PM: Registered nosave memory: 000000007fe89000 - 000000007feb3000
    PM: Registered nosave memory: 000000007feb9000 - 000000007febf000
    Allocating PCI resources starting at 88000000 (gap: 80000000:700f8000)
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 43120 bytes of per cpu data
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 514750
    Policy zone: DMA32
    Kernel command line: ro root=UUID=aa77bc4f-ce1e-46c2-ab72-8e693c722055
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    TSC calibrated against PM_TIMER
    time.c: Detected 2194.497 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Checking aperture...
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2055152k/2095944k available (2652k kernel code, 38008k reserved, 1391k data, 352k init)
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    hpet clockevent registered
    Calibrating delay using timer specific routine.. 4392.83 BogoMIPS (lpj=2196417)
    Security Framework initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 0/0 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    using mwait in idle threads.
    ACPI: Core revision 20070126
    Using local APIC timer interrupts.
    APIC timer calibration result 12468724
    Detected 12.468 MHz APIC timer.
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4388.80 BogoMIPS (lpj=2194400)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU 1/1 -> Node 0
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    sizeof(vma)=176 bytes
    sizeof(page)=56 bytes
    sizeof(inode)=560 bytes
    sizeof(dentry)=208 bytes
    sizeof(ext3inode)=760 bytes
    sizeof(buffer_head)=104 bytes
    sizeof(skbuff)=224 bytes
    sizeof(task_struct)=6256 bytes
    CPU0 attaching sched-domain:
    domain 0: span 00000000,00000003
    groups: 00000000,00000001 00000000,00000002
    domain 1: span 00000000,00000003
    groups: 00000000,00000003
    CPU1 attaching sched-domain:
    domain 0: span 00000000,00000003
    groups: 00000000,00000002 00000000,00000001
    domain 1: span 00000000,00000003
    groups: 00000000,00000003
    net_namespace: 1016 bytes
    Time: 18:18:25 Date: 02/18/09
    NET: Registered protocol family 16
    No dock devices found.
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    DMAR:parse DMAR table failure.
    PCI-GART: No AMD northbridge found.
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 64-bit timers, 14318180 Hz
    ACPI: RTC can wake from S4
    system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
    system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
    system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:07: ioport range 0x680-0x69f has been reserved
    system 00:07: ioport range 0x800-0x80f has been reserved
    system 00:07: ioport range 0x810-0x817 has been reserved
    system 00:07: ioport range 0x400-0x47f has been reserved
    system 00:07: ioport range 0x500-0x53f has been reserved
    system 00:07: ioport range 0x1640-0x164f has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 5000-5fff
    MEM window: 0x90000000-0x930fffff
    PREFETCH window: 0x0000000080000000-0x000000008fffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: 0x9b400000-0x9b4fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: 4000-4fff
    MEM window: 0x97400000-0x9b3fffff
    PREFETCH window: 0x0000000093100000-0x00000000970fffff
    PCI: Bridge: 0000:00:1c.4
    IO window: disabled.
    MEM window: 0x97300000-0x973fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.5
    IO window: 3000-3fff
    MEM window: 0x97200000-0x972fffff
    PREFETCH window: 0x000000009b600000-0x000000009b6fffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: 0x97100000-0x971fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 3523k freed
    audit: initializing netlink socket (disabled)
    type=2000 audit(1234981105.471:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.0: Performing full reset
    pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1a.1: Performing full reset
    pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.0: Performing full reset
    pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.1: Performing full reset
    pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
    pci 0000:00:1d.2: Performing full reset
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.5 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.5:pcie00]
    Allocate Port Service[0000:00:1c.5:pcie02]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    efifb: dmi detected MacBookPro3,1 - framebuffer at 0000000080030000 (1440x900, stride 8192)
    efifb: probing for efifb
    efifb: framebuffer at 0x80030000, mapped to 0xffffc20000900000, using 7200k, total 7200k
    efifb: mode is 1440x900x32, linelength=8192, pages=1
    efifb: scrolling: redraw
    efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    Console: switching to colour frame buffer device 180x56
    fb0: EFI VGA frame buffer device
    ACPI: SSDT 7FED9A98, 02FE (r1 APPLE Cpu0Ist 3000 INTL 20061109)
    ACPI: SSDT 7FED7C18, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20061109)
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 7FED8F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
    ACPI: SSDT 7FED7F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:01 is registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    hpet_resources: 0xfed00000 is busy
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    brd: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    cpuidle: using governor ladder
    cpuidle: using governor menu
    EFI Variables Facility v0.08 2004-May-17
    Marking TSC unstable due to TSC halts in idle
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    registered taskstats version 1
    Magic number: 13:507:342
    Freeing unused kernel memory: 352k freed
    Write protecting the kernel read-only data: 1120k
    ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
    PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file 'devices'
    drivers/usb/core/inode.c: creating file '001'
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
    ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    Clocksource tsc unstable (delta = -249790719 ns)
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: supports USB remote wakeup
    ehci_hcd 0000:00:1a.7: irq 21, io mem 0x9b504c00
    ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: default language 0x0409
    usb usb1: uevent
    usb usb1: usb_probe_device
    usb usb1: configuration #1 chosen from 1 choice
    usb usb1: adding 1-0:1.0 (config #1, interface 0)
    usb 1-0:1.0: uevent
    hub 1-0:1.0: usb_probe_interface
    hub 1-0:1.0: usb_probe_interface - got id
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    hub 1-0:1.0: standalone hub
    hub 1-0:1.0: no power switching (usb 1.0)
    hub 1-0:1.0: individual port over-current protection
    hub 1-0:1.0: Single TT
    hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
    hub 1-0:1.0: power on to power good time: 20ms
    hub 1-0:1.0: local power source is good
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
    drivers/usb/core/inode.c: creating file '001'
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
    hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
    PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    drivers/usb/core/inode.c: creating file '002'
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
    ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0x9b504800
    ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
    ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: default language 0x0409
    usb usb2: uevent
    usb usb2: usb_probe_device
    usb usb2: configuration #1 chosen from 1 choice
    usb usb2: adding 2-0:1.0 (config #1, interface 0)
    usb 2-0:1.0: uevent
    hub 2-0:1.0: usb_probe_interface
    hub 2-0:1.0: usb_probe_interface - got id
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    hub 2-0:1.0: standalone hub
    hub 2-0:1.0: no power switching (usb 1.0)
    hub 2-0:1.0: individual port over-current protection
    hub 2-0:1.0: Single TT
    hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
    hub 2-0:1.0: power on to power good time: 20ms
    hub 2-0:1.0: local power source is good
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
    ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
    hub 1-0:1.0: port 1 not reset yet, waiting 50ms
    drivers/usb/core/inode.c: creating file '001'
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 ehci_hcd
    ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
    hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
    usb usb2: SerialNumber: 0000:00:1d.7
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd: block sizes: ed 80 td 96
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
    drivers/usb/core/inode.c: creating file '003'
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: detected 2 ports
    uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.0: Performing full reset
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
    usb usb3: default language 0x0409
    usb usb3: uevent
    usb usb3: usb_probe_device
    usb usb3: configuration #1 chosen from 1 choice
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    usb usb3: adding 3-0:1.0 (config #1, interface 0)
    usb 3-0:1.0: uevent
    hub 3-0:1.0: usb_probe_interface
    hub 3-0:1.0: usb_probe_interface - got id
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    hub 3-0:1.0: standalone hub
    hub 3-0:1.0: no power switching (usb 1.0)
    hub 3-0:1.0: individual port over-current protection
    hub 3-0:1.0: power on to power good time: 2ms
    hub 3-0:1.0: local power source is good
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    usb 2-4: new high speed USB device using ehci_hcd and address 2
    ehci_hcd 0000:00:1d.7: port 4 high speed
    ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
    drivers/usb/core/inode.c: creating file '001'
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd
    usb usb3: SerialNumber: 0000:00:1a.0
    ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '004'
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: detected 2 ports
    usb 2-4: skipped 1 descriptor after configuration
    usb 2-4: skipped 5 descriptors after interface
    usb 2-4: skipped 1 descriptor after endpoint
    usb 2-4: skipped 22 descriptors after interface
    uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1a.1: Performing full reset
    usb 2-4: default language 0x0409
    uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
    usb usb4: default language 0x0409
    usb usb4: uevent
    usb usb4: usb_probe_device
    usb usb4: configuration #1 chosen from 1 choice
    usb usb4: adding 4-0:1.0 (config #1, interface 0)
    usb 4-0:1.0: uevent
    hub 4-0:1.0: usb_probe_interface
    hub 4-0:1.0: usb_probe_interface - got id
    hub 4-0:1.0: USB hub found
    usb 2-4: uevent
    usb 2-4: usb_probe_device
    usb 2-4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: 2 ports detected
    usb 2-4: adding 2-4:1.0 (config #1, interface 0)
    usb 2-4:1.0: uevent
    usb 2-4: adding 2-4:1.1 (config #1, interface 1)
    usb 2-4:1.1: uevent
    usb 2-4: adding 2-4:1.2 (config #1, interface 2)
    usb 2-4:1.2: uevent
    drivers/usb/core/inode.c: creating file '002'
    usb 2-4: New USB device found, idVendor=05ac, idProduct=8502
    usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    usb 2-4: Product: Built-in iSight
    usb 2-4: Manufacturer: Apple Inc.
    usb 2-4: SerialNumber: C07BA2BF3B1A93DB (03.00)
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT
    hub 2-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
    hub 4-0:1.0: standalone hub
    hub 4-0:1.0: no power switching (usb 1.0)
    hub 4-0:1.0: individual port over-current protection
    hub 4-0:1.0: power on to power good time: 2ms
    hub 4-0:1.0: local power source is good
    hub 4-0:1.0: trying to enable port power on non-switchable hub
    hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
    ehci_hcd 0000:00:1d.7: port 5 low speed --> companion
    drivers/usb/core/inode.c: creating file '001'
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: UHCI Host Controller
    ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
    hub 2-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
    usb usb4: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1a.1
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '005'
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: detected 2 ports
    uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.0: Performing full reset
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
    hub 2-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
    usb usb5: default language 0x0409
    usb usb5: uevent
    usb usb5: usb_probe_device
    usb usb5: configuration #1 chosen from 1 choice
    usb usb5: adding 5-0:1.0 (config #1, interface 0)
    usb 5-0:1.0: uevent
    hub 5-0:1.0: usb_probe_interface
    hub 5-0:1.0: usb_probe_interface - got id
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    hub 5-0:1.0: standalone hub
    hub 5-0:1.0: no power switching (usb 1.0)
    hub 5-0:1.0: individual port over-current protection
    hub 5-0:1.0: power on to power good time: 2ms
    hub 5-0:1.0: local power source is good
    hub 5-0:1.0: trying to enable port power on non-switchable hub
    ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
    hub 2-0:1.0: port 6 not reset yet, waiting 50ms
    ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
    uhci_hcd 0000:00:1a.0: port 1 portsc 009b,00
    hub 3-0:1.0: port 1, status 0101, change 0003, 12 Mb/s
    drivers/usb/core/inode.c: creating file '001'
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: UHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.0
    hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '006'
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: detected 2 ports
    uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.1: Performing full reset
    uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
    usb usb6: default language 0x0409
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    usb usb6: uevent
    usb usb6: usb_probe_device
    usb usb6: configuration #1 chosen from 1 choice
    usb usb6: adding 6-0:1.0 (config #1, interface 0)
    usb 6-0:1.0: uevent
    hub 6-0:1.0: usb_probe_interface
    hub 6-0:1.0: usb_probe_interface - got id
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    hub 6-0:1.0: standalone hub
    hub 6-0:1.0: no power switching (usb 1.0)
    hub 6-0:1.0: individual port over-current protection
    hub 6-0:1.0: power on to power good time: 2ms
    hub 6-0:1.0: local power source is good
    hub 6-0:1.0: trying to enable port power on non-switchable hub
    drivers/usb/core/inode.c: creating file '001'
    usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb6: Product: UHCI Host Controller
    usb usb6: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd
    usb usb6: SerialNumber: 0000:00:1d.1
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    drivers/usb/core/inode.c: creating file '007'
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: detected 2 ports
    uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:1d.2: Performing full reset
    uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
    usb usb7: default language 0x0409
    usb usb7: uevent
    usb usb7: usb_probe_device
    usb usb7: configuration #1 chosen from 1 choice
    usb usb7: adding 7-0:1.0 (config #1, interface 0)
    usb 7-0:1.0: uevent
    hub 7-0:1.0: usb_probe_interface
    hub 7-0:1.0: usb_probe_interface - got id
    hub 7-0:1.0: USB hub found
    usb 3-1: skipped 1 descriptor after interface
    usb 3-1: skipped 1 descriptor after interface
    usb 3-1: uevent
    hub 7-0:1.0: 2 ports detected
    usb 3-1: usb_probe_device
    usb 3-1: configuration #1 chosen from 1 choice
    hub 7-0:1.0: standalone hub
    hub 7-0:1.0: no power switching (usb 1.0)
    hub 7-0:1.0: individual port over-current protection
    hub 7-0:1.0: power on to power good time: 2ms
    hub 7-0:1.0: local power source is good
    hub 7-0:1.0: trying to enable port power on non-switchable hub
    usb 3-1: adding 3-1:1.0 (config #1, interface 0)
    usb 3-1:1.0: uevent
    usbhid 3-1:1.0: usb_probe_interface
    usbhid 3-1:1.0: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
    uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
    input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1
    usb 3-1: adding 3-1:1.1 (config #1, interface 1)
    usb 3-1:1.1: uevent
    usbhid 3-1:1.1: usb_probe_interface
    usbhid 3-1:1.1: usb_probe_interface - got id
    input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
    drivers/usb/core/inode.c: creating file '001'
    usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1
    drivers/usb/core/inode.c: creating file '002'
    usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
    usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040
    hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0004
    uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
    hub 6-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb7: Product: UHCI Host Controller
    usb usb4: suspend_rh (auto-stop)
    usb usb7: Manufacturer: Linux 2.6.25-0.204.rc8.git4.fc9.x86_64 uhci_hcd
    usb usb7: SerialNumber: 0000:00:1d.2
    hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0006
    uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00
    hub 7-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s
    SCSI subsystem initialized
    Driver 'sd' needs updating - please use bus_type methods
    libata version 3.00 loaded.
    hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
    ahci 0000:00:1f.2: version 3.0
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
    usb 7-1: new low speed USB device using uhci_hcd and address 2
    usb 7-1: skipped 1 descriptor after interface
    usb 7-1: default language 0x0409
    usb 7-1: uevent
    usb 7-1: usb_probe_device
    usb 7-1: configuration #1 chosen from 1 choice
    usb usb5: suspend_rh (auto-stop)
    usb 7-1: adding 7-1:1.0 (config #1, interface 0)
    usb 7-1:1.0: uevent
    usbhid 7-1:1.0: usb_probe_interface
    usbhid 7-1:1.0: usb_probe_interface - got id
    drivers/usb/core/file.c: looking for a minor, starting at 96
    hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1
    drivers/usb/core/inode.c: creating file '002'
    usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
    usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 7-1: Product: IR Receiver
    usb 7-1: Manufacturer: Apple Computer, Inc.
    uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
    hub 7-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
    hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
    hub 1-0:1.0: hub_suspend
    usb usb1: bus auto-suspend
    ehci_hcd 0000:00:1a.7: suspend root hub
    usb 7-2: new full speed USB device using uhci_hcd and address 3
    usb 7-2: ep0 maxpacket = 8
    usb 7-2: skipped 1 descriptor after interface
    usb 7-2: skipped 1 descriptor after interface
    usb 7-2: skipped 1 descriptor after interface
    usb 7-2: default language 0x0409
    usb 7-2: uevent
    usb 7-2: usb_probe_device
    usb 7-2: configuration #1 chosen from 1 choice
    usb 7-2: adding 7-2:1.0 (config #1, interface 0)
    usb 7-2:1.0: uevent
    usbhid 7-2:1.0: usb_probe_interface
    usbhid 7-2:1.0: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input3
    uhci_hcd 0000:00:1d.2: reserve dev 3 ep83-INT, period 8, phase 4, 17 us
    input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
    usb 7-2: adding 7-2:1.1 (config #1, interface 1)
    usb 7-2:1.1: uevent
    usbhid 7-2:1.1: usb_probe_interface
    usbhid 7-2:1.1: usb_probe_interface - got id
    usb 7-2: adding 7-2:1.2 (config #1, interface 2)
    usb 7-2:1.2: uevent
    usbhid 7-2:1.2: usb_probe_interface
    usbhid 7-2:1.2: usb_probe_interface - got id
    input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input4
    uhci_hcd 0000:00:1d.2: reserve dev 3 ep84-INT, period 8, phase 4, 12 us
    input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
    drivers/usb/core/inode.c: creating file '003'
    usb 7-2: New USB device found, idVendor=05ac, idProduct=021a
    usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 7-2: Product: Apple Internal Keyboard / Trackpad
    usb 7-2: Manufacturer: Apple Computer
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0x9b504000 port 0x9b504100 irq 2298
    ata2: DUMMY
    ata3: DUMMY
    hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb6: suspend_rh (auto-stop)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
    ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    hub 4-0:1.0: hub_suspend
    usb usb4: bus auto-suspend
    usb usb4: suspend_rh
    hub 5-0:1.0: hub_suspend
    usb usb5: bus auto-suspend
    usb usb5: suspend_rh
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    hub 6-0:1.0: hub_suspend
    usb usb6: bus auto-suspend
    usb usb6: suspend_rh
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux:8192 avtab hash slots allocated. Num of rules:171094
    SELinux:8192 avtab hash slots allocated. Num of rules:171094
    security: 5 users, 12 roles, 2293 types, 115 bools, 1 sens, 1024 cats
    security: 72 classes, 171094 rules
    SELinux: Completing initialization.
    SELinux: Setting up existing superblocks.
    SELinux: initialized (dev dm-0, type ext3), uses xattr
    SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
    SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
    SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
    SELinux: initialized (dev devpts, type devpts), uses transition SIDs
    SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
    SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
    SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
    SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
    SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
    SELinux: initialized (dev proc, type proc), uses genfs_contexts
    SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
    SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
    SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
    SELinux: policy loaded with handle_unknown=allow
    type=1403 audit(1234981115.944:2): policy loaded auid=4294967295 ses=4294967295
    usb usb3: uevent
    usb 3-0:1.0: uevent
    usb 3-1: uevent
    usb 3-1:1.0: uevent
    usb 3-1:1.1: uevent
    usb usb4: uevent
    usb 4-0:1.0: uevent
    usb usb1: uevent
    usb 1-0:1.0: uevent
    usb usb5: uevent
    usb 5-0:1.0: uevent
    usb usb6: uevent
    usb 6-0:1.0: uevent
    usb usb7: uevent
    usb 7-0:1.0: uevent
    usb 7-1: uevent
    usb 7-1:1.0: uevent
    usb 7-2: uevent
    usb 7-2:1.0: uevent
    usb 7-2:1.1: uevent
    usb 7-2:1.2: uevent
    usb usb2: uevent
    usb 2-0:1.0: uevent
    usb 2-4: uevent
    usb 2-4:1.0: uevent
    usb 2-4:1.1: uevent
    usb 2-4:1.2: uevent
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button (FF) [PWRF]
    ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:0c:00.0 to 64
    sky2 0000:0c:00.0: v1.21 addr 0x97200000 irq 17 Yukon-EC Ultra (0xb4) rev 3
    sky2 eth0: addr 00:1b:63:a0:59:d6
    PCI: Enabling device 0000:0b:00.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:0b:00.0 to 64
    ath5k_pci 0000:0b:00.0: registered as 'phy0'
    ath5k phy0: Device not yet supported.
    ACPI: PCI interrupt for device 0000:0b:00.0 disabled
    appletouch 7-2:1.1: usb_probe_interface
    appletouch 7-2:1.1: usb_probe_interface - got id
    appletouch: Geyser mode initialized.
    input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input6
    usbcore: registered new interface driver appletouch
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    ACPI: PCI interrupt for device 0000:00:1f.1 disabled
    Linux video capture interface: v2.00
    ata_piix 0000:00:1f.1: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x6108 ctl 0x611c bmdma 0x60e0 irq 21
    ata5: PATA max UDMA/100 cmd 0x6100 ctl 0x6118 bmdma 0x60e8 irq 21
    iTCO_vendor_support: vendor-support=0
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    input: PC Speaker as /devices/platform/pcspkr/input/input7
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input8
    ACPI: Lid Switch [LID0]
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input9
    ACPI: AC Adapter [ADP1] (on-line)
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input10
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    ACPI: Power Button (CM) [PWRB]
    input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input11
    ACPI: Sleep Button (CM) [SLPB]
    uvcvideo 2-4:1.0: usb_probe_interface
    uvcvideo 2-4:1.0: usb_probe_interface - got id
    uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
    usb 2-4: link qh4-0001/ffff81007d8e6140 start 3 [1/0 us]
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    ata4.00: ATAPI: HL-DT-ST DVDRW GSA-S10N, AP09, max UDMA/33
    ata4.00: configured for UDMA/33
    scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRW GSA-S10N AP09 PQ: 0 ANSI: 5
    scsi 3:0:0:0: Attached scsi generic sg1 type 5
    PCI: Enabling device 0000:00:1f.3 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 20
    PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
    ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Switch, skipped
    ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
    ACPI: PCI Interrupt 0000:0d:03.0[A] -> GSI 19 (level, low) -> IRQ 19
    firewire_ohci: Added fw-ohci device 0000:0d:03.0, OHCI version 1.10
    firewire_core: created device fw0: GUID 001cb3fffea2a2ae, S800
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    device-mapper: multipath: version 1.0.5 loaded
    loop: module loaded
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: initialized (dev sda3, type ext3), uses xattr
    SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
    SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
    Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
    SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
    \
     
     \ /
      Last update: 2009-03-02 02:43    [W:0.100 / U:66.332 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site