lkml.org 
[lkml]   [2009]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] OMAP: HSMMC: Initialize hsmmc controller registers when resuming
* David Brownell <david-b@pacbell.net> [090224 14:14]:
> On Tuesday 24 February 2009, Adrian Hunter wrote:
> > > I agree that code removed by this patch is ugly and worth
> > > removing if it's not actually needed for MMC1.
> >
> > Here is a patch against current OMAP tree.
> >
> > From: Adrian Hunter <ext-adrian.hunter@nokia.com>
> > Date: Tue, 24 Feb 2009 14:48:16 +0200
> > Subject: [PATCH] OMAP: HSMMC: do not re-power when powering off MMC
> >
> > Remove code that turns MMC1 power back on after it
> > has been powered off (when the voltage is 1.8V).
> >
> > The offending code is not necessary because the
> > host controller bus voltage is initialized to
> > 3V when probing or resuming.  Note that MMC powers up
> > with the highest voltage available (see mmc_power_up())
> > which will be 3V also.
> >
> > Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
>
> Looks OK to me -- ack. Safe to merge through the MMC
> tree right away, but it'll be a NOP until the glue
> actually supports 1.8V correctly for MMC1 ... so IMO
> no rush to merge for 2.6.29-final.

Good to hear we get rid of that REVISIT part.. My ack here too.

Acked-by: Tony Lindgren <tony@atomide.com>

> > ---
> >  drivers/mmc/host/omap_hsmmc.c |   17 -----------------
> >  1 files changed, 0 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> > index c0d5420..43cec98 100644
> > --- a/drivers/mmc/host/omap_hsmmc.c
> > +++ b/drivers/mmc/host/omap_hsmmc.c
> > @@ -486,9 +486,6 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
> >         u32 reg_val = 0;
> >         int ret;
> >  
> > -       if (host->id != OMAP_MMC1_DEVID)
> > -               return 0;
> > -
> >         /* Disable the clocks */
> >         clk_disable(host->fclk);
> >         clk_disable(host->iclk);
> > @@ -787,20 +784,6 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> >         switch (ios->power_mode) {
> >         case MMC_POWER_OFF:
> >                 mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
> > -               /*
> > -                * Reset interface voltage to 3V if it's 1.8V now;
> > -                * only relevant on MMC-1, the others always use 1.8V.
> > -                *
> > -                * REVISIT: If we are able to detect cards after unplugging
> > -                * a 1.8V card, this code should not be needed.
> > -                */
> > -               if (host->id != OMAP_MMC1_DEVID)
> > -                       break;
> > -               if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
> > -                       int vdd = fls(host->mmc->ocr_avail) - 1;
> > -                       if (omap_mmc_switch_opcond(host, vdd) != 0)
> > -                               host->mmc->ios.vdd = vdd;
> > -               }
> >                 break;
> >         case MMC_POWER_UP:
> >                 mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-02-27 23:11    [W:0.103 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site