lkml.org 
[lkml]   [2009]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] OMAP: HSMMC: Initialize hsmmc controller registers when resuming
Date
On Tuesday 24 February 2009, Adrian Hunter wrote:
> > I agree that code removed by this patch is ugly and worth
> > removing if it's not actually needed for MMC1.
>
> Here is a patch against current OMAP tree.
>
> From: Adrian Hunter <ext-adrian.hunter@nokia.com>
> Date: Tue, 24 Feb 2009 14:48:16 +0200
> Subject: [PATCH] OMAP: HSMMC: do not re-power when powering off MMC
>
> Remove code that turns MMC1 power back on after it
> has been powered off (when the voltage is 1.8V).
>
> The offending code is not necessary because the
> host controller bus voltage is initialized to
> 3V when probing or resuming.  Note that MMC powers up
> with the highest voltage available (see mmc_power_up())
> which will be 3V also.
>
> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>

Looks OK to me -- ack. Safe to merge through the MMC
tree right away, but it'll be a NOP until the glue
actually supports 1.8V correctly for MMC1 ... so IMO
no rush to merge for 2.6.29-final.


> ---
>  drivers/mmc/host/omap_hsmmc.c |   17 -----------------
>  1 files changed, 0 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index c0d5420..43cec98 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -486,9 +486,6 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
>         u32 reg_val = 0;
>         int ret;
>  
> -       if (host->id != OMAP_MMC1_DEVID)
> -               return 0;
> -
>         /* Disable the clocks */
>         clk_disable(host->fclk);
>         clk_disable(host->iclk);
> @@ -787,20 +784,6 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>         switch (ios->power_mode) {
>         case MMC_POWER_OFF:
>                 mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
> -               /*
> -                * Reset interface voltage to 3V if it's 1.8V now;
> -                * only relevant on MMC-1, the others always use 1.8V.
> -                *
> -                * REVISIT: If we are able to detect cards after unplugging
> -                * a 1.8V card, this code should not be needed.
> -                */
> -               if (host->id != OMAP_MMC1_DEVID)
> -                       break;
> -               if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
> -                       int vdd = fls(host->mmc->ocr_avail) - 1;
> -                       if (omap_mmc_switch_opcond(host, vdd) != 0)
> -                               host->mmc->ios.vdd = vdd;
> -               }
>                 break;
>         case MMC_POWER_UP:
>                 mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-02-24 23:15    [W:0.142 / U:2.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site