lkml.org 
[lkml]   [2009]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
Andreas Herrmann wrote:
> On Fri, Feb 20, 2009 at 12:40:31PM -0500, Mark Hounschell wrote:
>
>> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>
> <snip>
>
>> hpet: hpet_enable(834):
>> hpet: ID: 43538301, PERIOD: 429b17e
>
>
> This means that your BIOS could be bogus.
> Obviously ACPI HPET table contains different information about
> your HPET configuration than the HPET registers are showing.
>
> This means that other chipset configuration (e.g. ACPI tables) could
> also be wrong.
>
> To confirm this please provide us output of
>
> # xxd /sys/firmware/acpi/tables/HPET

markh@harley:~> xxd /sys/firmware/acpi/tables/HPET
0000000: 4850 4554 3800 0000 0101 5258 3738 3020 HPET8.....RX780
0000010: 4157 5244 4143 5049 312e 3042 4157 5244 AWRDACPI1.0BAWRD
0000020: 9800 0000 01a2 b910 0000 0000 0000 d0fe ................
0000030: 0000 0000 0010 0000

Mark


\
 
 \ /
  Last update: 2009-02-20 19:31    [W:0.112 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site