lkml.org 
[lkml]   [2009]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: 2.6.31 -> 2.6.32 Sound and video regressions
From
On Sat, Dec 5, 2009 at 12:48 PM, Emmanuel Benisty <benisty.e@gmail.com> wrote:
> As it may be useful, dmesg and kernel config are attached too.

Very sorry, wrong dmesg has been attached. Right one in this email.
Linux version 2.6.32 (root@drama) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Sat Dec 5 12:11:51 ICT 2009
Command line: root=/dev/sda6 rootfstype=ext4 ro fastboot
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f7a0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f7a0000 (usable)
modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
modified: 000000007f7f0000 - 000000007f800000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffb00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007f7a0000
0000000000 - 007f600000 page 2M
007f600000 - 007f7a0000 page 4k
kernel direct mapping tables up to 7f7a0000 @ 10000-14000
ACPI: RSDP 00000000000f7fd0 00024 (v02 ACPIAM)
ACPI: XSDT 000000007f7a0100 0007C (v01 _ASUS_ Notebook 06000708 MSFT 00000097)
ACPI: FACP 000000007f7a0290 000F4 (v03 A_M_I_ OEMFACP 06000708 MSFT 00000097)
ACPI: DSDT 000000007f7a0640 0CBF4 (v01 A8S00 A8S00001 00000001 INTL 20051117)
ACPI: FACS 000000007f7ae000 00040
ACPI: APIC 000000007f7a0390 0005C (v01 A_M_I_ OEMAPIC 06000708 MSFT 00000097)
ACPI: MCFG 000000007f7a03f0 0003C (v01 A_M_I_ OEMMCFG 06000708 MSFT 00000097)
ACPI: SLIC 000000007f7a0430 00176 (v01 _ASUS_ Notebook 06000708 MSFT 00000097)
ACPI: BOOT 000000007f7a05b0 00028 (v01 A_M_I_ OEMBOOT 06000708 MSFT 00000097)
ACPI: ECDT 000000007f7a05e0 00054 (v01 A_M_I_ OEMECDT 06000708 MSFT 00000097)
ACPI: OEMB 000000007f7ae040 00060 (v01 A_M_I_ AMI_OEM 06000708 MSFT 00000097)
ACPI: HPET 000000007f7ad240 00038 (v01 A_M_I_ OEMHPET 06000708 MSFT 00000097)
ACPI: GSCI 000000007f7ae0a0 02024 (v01 A_M_I_ GMCHSCI 06000708 MSFT 00000097)
ACPI: ATKG 000000007f7b02d0 08024 (v01 A_M_I_ OEMATKG 05000702 MSFT 00000097)
ACPI: SSDT 000000007f7b8cf0 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007f7a0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001794138] TEXT DATA BSS ==> [0001000000 - 0001794138]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0001795000 - 0001795240] BRK ==> [0001795000 - 0001795240]
#5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007f7a0
On node 0 totalpages: 522031
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3826 pages, LIFO batch:0
DMA32 zone: 7083 pages used for memmap
DMA32 zone: 510965 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880001800000 s81496 r8192 d20904 u1048576
pcpu-alloc: s81496 r8192 d20904 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514791
Kernel command line: root=/dev/sda6 rootfstype=ext4 ro fastboot
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Memory: 2047524k/2088576k available (4234k kernel code, 452k absent, 39872k reserved, 2172k data, 424k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Experimental preemptable hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 1994.974 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.94 BogoMIPS (lpj=1994974)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.81 BogoMIPS (lpj=1994907)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7979.76 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI Warning: Incorrect checksum in table [ATKG] - 81, should be 59 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeaff400-0xfeaff7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaff000-0xfeaff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 06f8 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887]
pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487]
pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe09f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeaff800-0xfeafffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:02:00.0: reg 10 32bit mmio: [0xfdcff000-0xfdcfffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xfddff000-0xfddfffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfddc0000-0xfdddffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfde00000-0xfe5fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xbdf00000-0xbfefffff]
pci 0000:07:03.0: reg 10 32bit mmio: [0xfe6ff800-0xfe6fffff]
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: PME# disabled
pci 0000:07:03.1: reg 10 32bit mmio: [0xfe6ff400-0xfe6ff4ff]
pci 0000:07:03.1: supports D1 D2
pci 0000:07:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.1: PME# disabled
pci 0000:07:03.2: reg 10 32bit mmio: [0xfe6ff000-0xfe6ff0ff]
pci 0000:07:03.2: supports D1 D2
pci 0000:07:03.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.2: PME# disabled
pci 0000:07:03.3: reg 10 32bit mmio: [0xfe6fec00-0xfe6fecff]
pci 0000:07:03.3: supports D1 D2
pci 0000:07:03.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:08: ioport range 0x480-0x48f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x400-0x41f has been reserved
system 00:09: ioport range 0x500-0x53f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0b: ioport range 0x250-0x253 has been reserved
system 00:0b: ioport range 0x256-0x25f has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x7f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1: IO window: 0x2000-0x2fff
pci 0000:00:1c.1: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2: IO window: 0xb000-0xbfff
pci 0000:00:1c.2: MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:1c.2: PREFETCH window: 0x00000080600000-0x000000807fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3: IO window: 0x3000-0x3fff
pci 0000:00:1c.3: MEM window: 0x80800000-0x809fffff
pci 0000:00:1c.3: PREFETCH window: 0x00000080a00000-0x00000080bfffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: 0xc000-0xcfff
pci 0000:00:1c.4: MEM window: 0xfde00000-0xfe5fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000bdf00000-0x000000bfefffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0106 -> 0107)
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0104 -> 0107)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff]
pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 pref mem [0x80400000-0x805fffff]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 pref mem [0x80600000-0x807fffff]
pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0x80800000-0x809fffff]
pci_bus 0000:04: resource 2 pref mem [0x80a00000-0x80bfffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfde00000-0xfe5fffff]
pci_bus 0000:05: resource 2 pref mem [0xbdf00000-0xbfefffff]
pci_bus 0000:07: resource 1 mem: [0xfe600000-0xfe6fffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Simple Boot Flag at 0x52 set to 0x1
Scanning for low memory corruption every 60 seconds
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 4000
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
ACPI: AC Adapter [AC0] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: SSDT 000000007f7b83d0 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 000000007f7b86f0 005F1 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
Switching to clocksource hpet
ACPI: SSDT 000000007f7b8300 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 000000007f7b8660 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 29 for MSI/MSI-X
[drm] set up 7M of stolen space
ACPI: Battery Slot [BAT0] (battery present)
[drm] TV-14: set mode NTSC 480i 0
[drm] LVDS-8: set mode 1280x800 1d
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:1f: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff900 irq 30
ata2: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaff980 irq 30
ata3: SATA max UDMA/133 abar m2048@0xfeaff800 port 0xfeaffa00 irq 30
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata5: port disabled. ignoring.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xffffc90010086000, 00:1d:60:62:06:c1, XID 18000000 IRQ 31
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
cpuidle: using governor ladder
cpuidle: using governor menu
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: A8E model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input4
Registered led device: asus::mail
asus_laptop: Brightness ignored, must be controlled by ACPI video driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
hda_codec: ALC660-VD: BIOS auto-probing.
ALSA device list:
#0: HDA Intel at 0xfeaf8000 irq 22
TCP cubic registered
NET: Registered protocol family 17
ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, AS06, max UDMA/33
ata4.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: WDC WD3200BEKT-22F3T0, 11.01A11, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D AS06 PQ: 0 ANSI: 5
sda1 sda2 <sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sda5
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda6 sda7 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda6): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
Freeing unused kernel memory: 424k freed
udev: starting version 147
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeaff400
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
ACPI: Expecting a [Reference] package element, found type C
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:07:03.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
ohci1394 0000:07:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fe6ff800-fe6fffff] Max Packet=[2048] IR/IT contexts=[4/4]
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:02:00.0: setting latency timer to 64
usb 1-1: new high speed USB device using ehci_hcd and address 2
iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:02:00.0: irq 32 for MSI/MSI-X
usb 1-1: configuration #1 chosen from 1 choice
phy0: Selected rate control algorithm 'iwl-3945-rs'
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam (04f2:b028)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000
input: USB2.0 0.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
usb 6-1: new full speed USB device using uhci_hcd and address 2
EXT4-fs (sda5): barriers disabled
EXT4-fs (sda5): mounted filesystem with ordered data mode
usb 6-1: configuration #1 chosen from 1 choice
EXT4-fs (sda7): barriers disabled
EXT4-fs (sda7): mounted filesystem with ordered data mode
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Adding 1823368k swap on /dev/sda4. Priority:-1 extents:1 across:1823368k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003a56332]
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
wlan0: deauthenticating from 00:13:f7:0e:e9:8c by local choice (reason=3)
wlan0: direct probe to AP 00:13:f7:0e:e9:8c (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:13:f7:0e:e9:8c (try 1)
wlan0: authenticated
wlan0: associate with AP 00:13:f7:0e:e9:8c (try 1)
wlan0: RX AssocResp from 00:13:f7:0e:e9:8c (capab=0x471 status=0 aid=1)
wlan0: associated
\
 
 \ /
  Last update: 2009-12-05 07:09    [W:0.071 / U:1.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site