lkml.org 
[lkml]   [2009]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC][PATCH 00/10] Base support for Freescale i.MX51 SoC platform
Date
This series of patches adds basic support for i.MX5 family to the kernel. The
target device is the i.MX51-based Babbage board (v2.5+) since that is the
hardware I have access to.

This is a result of dropping a lot of functionality from the existing
Freescale codebase that is shipping as part of the Ubuntu ARM enablement. A
lot of the code was refactored to use facilities that were already available
upstream in arch/arm/plat-mxc/. The hope is to get this base port into
mainline and then start working on mainlining the drivers.

With regards to the splitting of the patches, I felt that the following
patchset made it easy to review code. But if this is not acceptable and some
of these patches need to be merged into a single patch, I can do that too.

Regards,
Amit

Amit Kucheria (8):
arm: mxc: New interrupt controller (TZIC) for i.MX5 family
arm: mxc: base support for Freescale i.MX51 processor
arm: mxc: changes to common plat-mxc code to add support for i.MX5
arm: mxc: Fix Drive Strength Field in the IOMUX controller
mxc: Add board support for the i.MX51 babbage board
fec: Add LAN8700 phy support
fec: Add ARCH_MX5 as a dependency
arm: mxc: Add imx51_defconfig

Dinh Nguyen (1):
arm: mxc: Add IO multiplexing support for FEC

Rob Herring (1):
fec: fix uninitialized rx buffer usage

arch/arm/Makefile | 1 +
arch/arm/configs/imx51_defconfig | 1383 ++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 17 +
arch/arm/mach-mx5/Makefile | 9 +
arch/arm/mach-mx5/Makefile.boot | 3 +
arch/arm/mach-mx5/board-mx51_babbage.c | 184 ++++
arch/arm/mach-mx5/clock.c | 817 +++++++++++++++
arch/arm/mach-mx5/cpu.c | 46 +
arch/arm/mach-mx5/crm_regs.h | 685 +++++++++++++
arch/arm/mach-mx5/devices.c | 90 ++
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/mm.c | 86 ++
arch/arm/plat-mxc/Kconfig | 12 +
arch/arm/plat-mxc/Makefile | 9 +-
arch/arm/plat-mxc/include/mach/common.h | 3 +
arch/arm/plat-mxc/include/mach/debug-macro.S | 9 +
arch/arm/plat-mxc/include/mach/entry-macro.S | 34 +-
arch/arm/plat-mxc/include/mach/hardware.h | 4 +
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 309 ++++++
arch/arm/plat-mxc/include/mach/iomux-v3.h | 16 +-
arch/arm/plat-mxc/include/mach/irqs.h | 9 +-
arch/arm/plat-mxc/include/mach/memory.h | 3 +
arch/arm/plat-mxc/include/mach/mx51.h | 481 +++++++++
arch/arm/plat-mxc/include/mach/mxc.h | 13 +
arch/arm/plat-mxc/include/mach/timex.h | 2 +
arch/arm/plat-mxc/time.c | 52 +-
arch/arm/plat-mxc/tzic.c | 180 ++++
drivers/net/Kconfig | 3 +-
drivers/net/fec.c | 78 +-
29 files changed, 4506 insertions(+), 36 deletions(-)
create mode 100644 arch/arm/configs/imx51_defconfig
create mode 100644 arch/arm/mach-mx5/Kconfig
create mode 100644 arch/arm/mach-mx5/Makefile
create mode 100644 arch/arm/mach-mx5/Makefile.boot
create mode 100644 arch/arm/mach-mx5/board-mx51_babbage.c
create mode 100644 arch/arm/mach-mx5/clock.c
create mode 100644 arch/arm/mach-mx5/cpu.c
create mode 100644 arch/arm/mach-mx5/crm_regs.h
create mode 100644 arch/arm/mach-mx5/devices.c
create mode 100644 arch/arm/mach-mx5/devices.h
create mode 100644 arch/arm/mach-mx5/mm.c
create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx51.h
create mode 100644 arch/arm/plat-mxc/include/mach/mx51.h
create mode 100644 arch/arm/plat-mxc/tzic.c



\
 
 \ /
  Last update: 2009-12-04 03:49    [W:0.254 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site