lkml.org 
[lkml]   [2009]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[BUG] 2.6.32 - Sddr-09 SM reader resets endlessly
Date
Hi,

Just booted in 2.6.32 and shortly after the boot finished my console was spammed with:

[ 72.221620] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.375589] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.529568] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.683603] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.837601] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 72.991700] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.145679] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.309620] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.463603] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.617604] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.704218] usb 7-4.1: device descriptor read/all, error -32
[ 73.773612] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 73.927569] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 74.081627] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5
[ 74.244640] usb 7-4.1: reset full speed USB device using ehci_hcd and address 5

I noticed the leds on the devince blinking and unplugged it. The messages stopped.

Plugging it in to another port gave:

[ 120.096590] usb 7-4.2: new full speed USB device using ehci_hcd and address 7
[ 120.188421] usb 7-4.2: New USB device found, idVendor=0781, idProduct=0200
[ 120.196857] usb 7-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 120.205801] usb 7-4.2: Product: USB SSFDC
[ 120.205803] usb 7-4.2: Manufacturer: SanDisk
[ 120.206023] usb 7-4.2: configuration #1 chosen from 1 choice
[ 120.210375] scsi10 : SCSI emulation for USB Mass Storage devices
[ 120.210625] usb-storage: device found at 7
[ 120.210627] usb-storage: waiting for device to settle before scanning
[ 125.210356] scsi 10:0:0:0: Direct-Access Sandisk0 ImageMate SDDR-0 0208 PQ: 0 ANSI: 0
[ 125.221014] sd 10:0:0:0: Attached scsi generic sg8 type 0
[ 125.538583] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.693592] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.846595] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 125.999570] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.152625] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.306641] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.400839] sddr09: could not read card info
[ 126.412283] sddr09: could not read card info
[ 126.418737] sd 10:0:0:0: [sdh] Test WP failed, assume Write Enabled
[ 126.418760] usb-storage: device scan complete
[ 126.433764] sd 10:0:0:0: [sdh] Assuming drive cache: write through
[ 126.497612] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.654080] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.810051] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 126.965658] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.121623] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.276631] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 127.366116] sd 10:0:0:0: [sdh] Attached SCSI removable disk
[ 140.543572] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 140.699676] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 140.855450] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.010675] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.166668] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7
[ 141.322616] usb 7-4.2: reset full speed USB device using ehci_hcd and address 7

just in case it happened to be an interaction with the hub used I tried another:

[ 1294.563062] usb 3-1: new full speed USB device using ohci_hcd and address 3
[ 1294.718252] usb 3-1: New USB device found, idVendor=0781, idProduct=0200
[ 1294.725162] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1294.732507] usb 3-1: Product: USB SSFDC
[ 1294.732508] usb 3-1: Manufacturer: SanDisk
[ 1294.733099] usb 3-1: configuration #1 chosen from 1 choice
[ 1294.745034] scsi11 : SCSI emulation for USB Mass Storage devices
[ 1294.747443] usb-storage: device found at 3
[ 1294.747446] usb-storage: waiting for device to settle before scanning
[ 1299.747426] scsi 11:0:0:0: Direct-Access Sandisk ImageMate SDDR-0 0208 PQ: 0 ANSI: 0
[ 1299.756510] sd 11:0:0:0: Attached scsi generic sg8 type 0
[ 1300.134401] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.412298] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.688049] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1300.963179] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.244400] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.524066] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1301.687139] sddr09: could not read card info
[ 1301.703118] sddr09: could not read card info
[ 1301.707764] usb-storage: device scan complete
[ 1301.708402] sd 11:0:0:0: [sdh] Test WP failed, assume Write Enabled
[ 1301.708404] sd 11:0:0:0: [sdh] Assuming drive cache: write through
[ 1301.848059] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.124049] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.400044] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.677051] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1302.952305] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1303.229063] usb 3-1: reset full speed USB device using ohci_hcd and address 3
[ 1303.378075] sd 11:0:0:0: [sdh] Attached SCSI removable disk
[ 1314.966421] usb 3-1: reset full speed USB device using ohci_hcd and address 3

with the same results.

Ideas?

Ed



\
 
 \ /
  Last update: 2009-12-04 00:03    [W:0.054 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site