lkml.org 
[lkml]   [2009]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH]PCIe AER: reject aer inject if hardware mask error reporting
From
Date
On Fri, 2009-12-11 at 18:48 -0500, Youquan,Song wrote:
> Correcteable/Uncorrectable Error Mask Register are used by PCIe AER driver
> which will controls the reporting of idividual errors to PCIe RC via PCIe
> error messages.
>
> If hardware masks special error reporting to RC, the aer_inject driver should
> not inject aer error.
>
> Signed-off-by: Youquan, Song <youquan.song@intel.com>
> Acked-by: Ying, Huang <ying.huang@intel.com>
> ---
>
> diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
> index ad77f0c..fa2bc22 100644
> --- a/drivers/pci/pcie/aer/aer_inject.c
> +++ b/drivers/pci/pcie/aer/aer_inject.c
> @@ -302,7 +302,7 @@ static int aer_inject(struct aer_error_inj *einj)
> unsigned long flags;
> unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
> int pos_cap_err, rp_pos_cap_err;
> - u32 sever;
> + u32 sever, mask;
> int ret = 0;
>
> dev = pci_get_bus_and_slot(einj->bus, devfn);

This does not apply. Please respin against latest linux-2.6 or pci-2.6.

> @@ -354,6 +354,22 @@ static int aer_inject(struct aer_error_inj *einj)
> err->header_log2 = einj->header_log2;
> err->header_log3 = einj->header_log3;
>
> + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask);
> + if (einj->cor_status && !(einj->cor_status & ~mask)) {
> + ret = -EINVAL;
> + printk(KERN_WARNING "The correctable error is masked by device\n");

You can inject multiple correctable errors with the aer-inject user-land
tool, so perhaps this should be re-worded as:

"The correctable error(s) are masked by the device\n"

> + spin_unlock_irqrestore(&inject_lock, flags);
> + goto out_put;
> + }
> +
> + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask);
> + if (einj->uncor_status && !(einj->uncor_status & ~mask)) {
> + ret = -EINVAL;
> + printk(KERN_WARNING "The uncorrectable error is masked by device\n");

Same as above

> + spin_unlock_irqrestore(&inject_lock, flags);
> + goto out_put;
> + }
> +

You can also simultaneously inject correctable and uncorrectable errors,
so I don't particularly like returning errors here. Perhaps you should
just print the warning message out and just not inject the masked
errors.

> rperr = __find_aer_error_by_dev(rpdev);
> if (!rperr) {
> rperr = rperr_alloc;
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>


--
Andrew Patterson
Hewlett-Packard



\
 
 \ /
  Last update: 2009-12-15 01:31    [W:0.120 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site