lkml.org 
[lkml]   [2009]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/19] OMAP: DSS2: RFBI driver
Date
RFBI (Remote FrameBuffer Interface) implements MIPI DBI interface.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
---
drivers/video/omap2/dss/rfbi.c | 1309 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 1309 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/omap2/dss/rfbi.c

diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
new file mode 100644
index 0000000..d0b3006
--- /dev/null
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -0,0 +1,1309 @@
+/*
+ * linux/drivers/video/omap2/dss/rfbi.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "RFBI"
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/kfifo.h>
+#include <linux/ktime.h>
+#include <linux/hrtimer.h>
+#include <linux/seq_file.h>
+
+#include <plat/display.h>
+#include "dss.h"
+
+/*#define MEASURE_PERF*/
+
+#define RFBI_BASE 0x48050800
+
+struct rfbi_reg { u16 idx; };
+
+#define RFBI_REG(idx) ((const struct rfbi_reg) { idx })
+
+#define RFBI_REVISION RFBI_REG(0x0000)
+#define RFBI_SYSCONFIG RFBI_REG(0x0010)
+#define RFBI_SYSSTATUS RFBI_REG(0x0014)
+#define RFBI_CONTROL RFBI_REG(0x0040)
+#define RFBI_PIXEL_CNT RFBI_REG(0x0044)
+#define RFBI_LINE_NUMBER RFBI_REG(0x0048)
+#define RFBI_CMD RFBI_REG(0x004c)
+#define RFBI_PARAM RFBI_REG(0x0050)
+#define RFBI_DATA RFBI_REG(0x0054)
+#define RFBI_READ RFBI_REG(0x0058)
+#define RFBI_STATUS RFBI_REG(0x005c)
+
+#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18)
+#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18)
+#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18)
+#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18)
+#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18)
+#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18)
+
+#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090)
+#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094)
+
+#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param))
+
+#define REG_FLD_MOD(idx, val, start, end) \
+ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
+
+/* To work around an RFBI transfer rate limitation */
+#define OMAP_RFBI_RATE_LIMIT 1
+
+enum omap_rfbi_cycleformat {
+ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
+ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
+ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2,
+ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3,
+};
+
+enum omap_rfbi_datatype {
+ OMAP_DSS_RFBI_DATATYPE_12 = 0,
+ OMAP_DSS_RFBI_DATATYPE_16 = 1,
+ OMAP_DSS_RFBI_DATATYPE_18 = 2,
+ OMAP_DSS_RFBI_DATATYPE_24 = 3,
+};
+
+enum omap_rfbi_parallelmode {
+ OMAP_DSS_RFBI_PARALLELMODE_8 = 0,
+ OMAP_DSS_RFBI_PARALLELMODE_9 = 1,
+ OMAP_DSS_RFBI_PARALLELMODE_12 = 2,
+ OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
+};
+
+enum update_cmd {
+ RFBI_CMD_UPDATE = 0,
+ RFBI_CMD_SYNC = 1,
+};
+
+static int rfbi_convert_timings(struct rfbi_timings *t);
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
+static void process_cmd_fifo(void);
+
+static struct {
+ void __iomem *base;
+
+ unsigned long l4_khz;
+
+ enum omap_rfbi_datatype datatype;
+ enum omap_rfbi_parallelmode parallelmode;
+
+ enum omap_rfbi_te_mode te_mode;
+ int te_enabled;
+
+ void (*framedone_callback)(void *data);
+ void *framedone_callback_data;
+
+ struct omap_dss_device *dssdev[2];
+
+ struct kfifo *cmd_fifo;
+ spinlock_t cmd_lock;
+ struct completion cmd_done;
+ atomic_t cmd_fifo_full;
+ atomic_t cmd_pending;
+#ifdef MEASURE_PERF
+ unsigned perf_bytes;
+ ktime_t perf_setup_time;
+ ktime_t perf_start_time;
+#endif
+} rfbi;
+
+struct update_region {
+ u16 x;
+ u16 y;
+ u16 w;
+ u16 h;
+};
+
+struct update_param {
+ u8 rfbi_module;
+ u8 cmd;
+
+ union {
+ struct update_region r;
+ struct completion *sync;
+ } par;
+};
+
+static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
+{
+ __raw_writel(val, rfbi.base + idx.idx);
+}
+
+static inline u32 rfbi_read_reg(const struct rfbi_reg idx)
+{
+ return __raw_readl(rfbi.base + idx.idx);
+}
+
+static void rfbi_enable_clocks(bool enable)
+{
+ if (enable)
+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+ else
+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+}
+
+void omap_rfbi_write_command(const void *buf, u32 len)
+{
+ rfbi_enable_clocks(1);
+ switch (rfbi.parallelmode) {
+ case OMAP_DSS_RFBI_PARALLELMODE_8:
+ {
+ const u8 *b = buf;
+ for (; len; len--)
+ rfbi_write_reg(RFBI_CMD, *b++);
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_16:
+ {
+ const u16 *w = buf;
+ BUG_ON(len & 1);
+ for (; len; len -= 2)
+ rfbi_write_reg(RFBI_CMD, *w++);
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_9:
+ case OMAP_DSS_RFBI_PARALLELMODE_12:
+ default:
+ BUG();
+ }
+ rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_command);
+
+void omap_rfbi_read_data(void *buf, u32 len)
+{
+ rfbi_enable_clocks(1);
+ switch (rfbi.parallelmode) {
+ case OMAP_DSS_RFBI_PARALLELMODE_8:
+ {
+ u8 *b = buf;
+ for (; len; len--) {
+ rfbi_write_reg(RFBI_READ, 0);
+ *b++ = rfbi_read_reg(RFBI_READ);
+ }
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_16:
+ {
+ u16 *w = buf;
+ BUG_ON(len & ~1);
+ for (; len; len -= 2) {
+ rfbi_write_reg(RFBI_READ, 0);
+ *w++ = rfbi_read_reg(RFBI_READ);
+ }
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_9:
+ case OMAP_DSS_RFBI_PARALLELMODE_12:
+ default:
+ BUG();
+ }
+ rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_read_data);
+
+void omap_rfbi_write_data(const void *buf, u32 len)
+{
+ rfbi_enable_clocks(1);
+ switch (rfbi.parallelmode) {
+ case OMAP_DSS_RFBI_PARALLELMODE_8:
+ {
+ const u8 *b = buf;
+ for (; len; len--)
+ rfbi_write_reg(RFBI_PARAM, *b++);
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_16:
+ {
+ const u16 *w = buf;
+ BUG_ON(len & 1);
+ for (; len; len -= 2)
+ rfbi_write_reg(RFBI_PARAM, *w++);
+ break;
+ }
+
+ case OMAP_DSS_RFBI_PARALLELMODE_9:
+ case OMAP_DSS_RFBI_PARALLELMODE_12:
+ default:
+ BUG();
+
+ }
+ rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_data);
+
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+ u16 x, u16 y,
+ u16 w, u16 h)
+{
+ int start_offset = scr_width * y + x;
+ int horiz_offset = scr_width - w;
+ int i;
+
+ rfbi_enable_clocks(1);
+
+ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+ const u16 __iomem *pd = buf;
+ pd += start_offset;
+
+ for (; h; --h) {
+ for (i = 0; i < w; ++i) {
+ const u8 __iomem *b = (const u8 __iomem *)pd;
+ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+ ++pd;
+ }
+ pd += horiz_offset;
+ }
+ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 &&
+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
+ const u32 __iomem *pd = buf;
+ pd += start_offset;
+
+ for (; h; --h) {
+ for (i = 0; i < w; ++i) {
+ const u8 __iomem *b = (const u8 __iomem *)pd;
+ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
+ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
+ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
+ ++pd;
+ }
+ pd += horiz_offset;
+ }
+ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
+ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) {
+ const u16 __iomem *pd = buf;
+ pd += start_offset;
+
+ for (; h; --h) {
+ for (i = 0; i < w; ++i) {
+ rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
+ ++pd;
+ }
+ pd += horiz_offset;
+ }
+ } else {
+ BUG();
+ }
+
+ rfbi_enable_clocks(0);
+}
+EXPORT_SYMBOL(omap_rfbi_write_pixels);
+
+#ifdef MEASURE_PERF
+static void perf_mark_setup(void)
+{
+ rfbi.perf_setup_time = ktime_get();
+}
+
+static void perf_mark_start(void)
+{
+ rfbi.perf_start_time = ktime_get();
+}
+
+static void perf_show(const char *name)
+{
+ ktime_t t, setup_time, trans_time;
+ u32 total_bytes;
+ u32 setup_us, trans_us, total_us;
+
+ t = ktime_get();
+
+ setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time);
+ setup_us = (u32)ktime_to_us(setup_time);
+ if (setup_us == 0)
+ setup_us = 1;
+
+ trans_time = ktime_sub(t, rfbi.perf_start_time);
+ trans_us = (u32)ktime_to_us(trans_time);
+ if (trans_us == 0)
+ trans_us = 1;
+
+ total_us = setup_us + trans_us;
+
+ total_bytes = rfbi.perf_bytes;
+
+ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, "
+ "%u kbytes/sec\n",
+ name,
+ setup_us,
+ trans_us,
+ total_us,
+ 1000*1000 / total_us,
+ total_bytes,
+ total_bytes * 1000 / total_us);
+}
+#else
+#define perf_mark_setup()
+#define perf_mark_start()
+#define perf_show(x)
+#endif
+
+void rfbi_transfer_area(u16 width, u16 height,
+ void (callback)(void *data), void *data)
+{
+ u32 l;
+
+ /*BUG_ON(callback == 0);*/
+ BUG_ON(rfbi.framedone_callback != NULL);
+
+ DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
+
+ dispc_set_lcd_size(width, height);
+
+ dispc_enable_lcd_out(1);
+
+ rfbi.framedone_callback = callback;
+ rfbi.framedone_callback_data = data;
+
+ rfbi_enable_clocks(1);
+
+ rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
+
+ l = rfbi_read_reg(RFBI_CONTROL);
+ l = FLD_MOD(l, 1, 0, 0); /* enable */
+ if (!rfbi.te_enabled)
+ l = FLD_MOD(l, 1, 4, 4); /* ITE */
+
+ perf_mark_start();
+
+ rfbi_write_reg(RFBI_CONTROL, l);
+}
+
+static void framedone_callback(void *data, u32 mask)
+{
+ void (*callback)(void *data);
+
+ DSSDBG("FRAMEDONE\n");
+
+ perf_show("DISPC");
+
+ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0);
+
+ rfbi_enable_clocks(0);
+
+ callback = rfbi.framedone_callback;
+ rfbi.framedone_callback = NULL;
+
+ /*callback(rfbi.framedone_callback_data);*/
+
+ atomic_set(&rfbi.cmd_pending, 0);
+
+ process_cmd_fifo();
+}
+
+#if 1 /* VERBOSE */
+static void rfbi_print_timings(void)
+{
+ u32 l;
+ u32 time;
+
+ l = rfbi_read_reg(RFBI_CONFIG(0));
+ time = 1000000000 / rfbi.l4_khz;
+ if (l & (1 << 4))
+ time *= 2;
+
+ DSSDBG("Tick time %u ps\n", time);
+ l = rfbi_read_reg(RFBI_ONOFF_TIME(0));
+ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
+ "REONTIME %d, REOFFTIME %d\n",
+ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
+ (l >> 20) & 0x0f, (l >> 24) & 0x3f);
+
+ l = rfbi_read_reg(RFBI_CYCLE_TIME(0));
+ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
+ "ACCESSTIME %d\n",
+ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
+ (l >> 22) & 0x3f);
+}
+#else
+static void rfbi_print_timings(void) {}
+#endif
+
+
+
+
+static u32 extif_clk_period;
+
+static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
+{
+ int bus_tick = extif_clk_period * div;
+ return (ps + bus_tick - 1) / bus_tick * bus_tick;
+}
+
+static int calc_reg_timing(struct rfbi_timings *t, int div)
+{
+ t->clk_div = div;
+
+ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div);
+
+ t->we_on_time = round_to_extif_ticks(t->we_on_time, div);
+ t->we_off_time = round_to_extif_ticks(t->we_off_time, div);
+ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div);
+
+ t->re_on_time = round_to_extif_ticks(t->re_on_time, div);
+ t->re_off_time = round_to_extif_ticks(t->re_off_time, div);
+ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div);
+
+ t->access_time = round_to_extif_ticks(t->access_time, div);
+ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div);
+ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div);
+
+ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n",
+ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
+ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n",
+ t->we_on_time, t->we_off_time, t->re_cycle_time,
+ t->we_cycle_time);
+ DSSDBG("[reg]rdaccess %d cspulse %d\n",
+ t->access_time, t->cs_pulse_width);
+
+ return rfbi_convert_timings(t);
+}
+
+static int calc_extif_timings(struct rfbi_timings *t)
+{
+ u32 max_clk_div;
+ int div;
+
+ rfbi_get_clk_info(&extif_clk_period, &max_clk_div);
+ for (div = 1; div <= max_clk_div; div++) {
+ if (calc_reg_timing(t, div) == 0)
+ break;
+ }
+
+ if (div <= max_clk_div)
+ return 0;
+
+ DSSERR("can't setup timings\n");
+ return -1;
+}
+
+
+void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
+{
+ int r;
+
+ if (!t->converted) {
+ r = calc_extif_timings(t);
+ if (r < 0)
+ DSSERR("Failed to calc timings\n");
+ }
+
+ BUG_ON(!t->converted);
+
+ rfbi_enable_clocks(1);
+ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]);
+ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]);
+
+ /* TIMEGRANULARITY */
+ REG_FLD_MOD(RFBI_CONFIG(rfbi_module),
+ (t->tim[2] ? 1 : 0), 4, 4);
+
+ rfbi_print_timings();
+ rfbi_enable_clocks(0);
+}
+
+static int ps_to_rfbi_ticks(int time, int div)
+{
+ unsigned long tick_ps;
+ int ret;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = 1000000000 / (rfbi.l4_khz) * div;
+
+ ret = (time + tick_ps - 1) / tick_ps;
+
+ return ret;
+}
+
+#ifdef OMAP_RFBI_RATE_LIMIT
+unsigned long rfbi_get_max_tx_rate(void)
+{
+ unsigned long l4_rate, dss1_rate;
+ int min_l4_ticks = 0;
+ int i;
+
+ /* According to TI this can't be calculated so make the
+ * adjustments for a couple of known frequencies and warn for
+ * others.
+ */
+ static const struct {
+ unsigned long l4_clk; /* HZ */
+ unsigned long dss1_clk; /* HZ */
+ unsigned long min_l4_ticks;
+ } ftab[] = {
+ { 55, 132, 7, }, /* 7.86 MPix/s */
+ { 110, 110, 12, }, /* 9.16 MPix/s */
+ { 110, 132, 10, }, /* 11 Mpix/s */
+ { 120, 120, 10, }, /* 12 Mpix/s */
+ { 133, 133, 10, }, /* 13.3 Mpix/s */
+ };
+
+ l4_rate = rfbi.l4_khz / 1000;
+ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000;
+
+ for (i = 0; i < ARRAY_SIZE(ftab); i++) {
+ /* Use a window instead of an exact match, to account
+ * for different DPLL multiplier / divider pairs.
+ */
+ if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
+ abs(ftab[i].dss1_clk - dss1_rate) < 3) {
+ min_l4_ticks = ftab[i].min_l4_ticks;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(ftab)) {
+ /* Can't be sure, return anyway the maximum not
+ * rate-limited. This might cause a problem only for the
+ * tearing synchronisation.
+ */
+ DSSERR("can't determine maximum RFBI transfer rate\n");
+ return rfbi.l4_khz * 1000;
+ }
+ return rfbi.l4_khz * 1000 / min_l4_ticks;
+}
+#else
+int rfbi_get_max_tx_rate(void)
+{
+ return rfbi.l4_khz * 1000;
+}
+#endif
+
+static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
+{
+ *clk_period = 1000000000 / rfbi.l4_khz;
+ *max_clk_div = 2;
+}
+
+static int rfbi_convert_timings(struct rfbi_timings *t)
+{
+ u32 l;
+ int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
+ int actim, recyc, wecyc;
+ int div = t->clk_div;
+
+ if (div <= 0 || div > 2)
+ return -1;
+
+ /* Make sure that after conversion it still holds that:
+ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
+ * csoff > cson, csoff >= max(weoff, reoff), actim > reon
+ */
+ weon = ps_to_rfbi_ticks(t->we_on_time, div);
+ weoff = ps_to_rfbi_ticks(t->we_off_time, div);
+ if (weoff <= weon)
+ weoff = weon + 1;
+ if (weon > 0x0f)
+ return -1;
+ if (weoff > 0x3f)
+ return -1;
+
+ reon = ps_to_rfbi_ticks(t->re_on_time, div);
+ reoff = ps_to_rfbi_ticks(t->re_off_time, div);
+ if (reoff <= reon)
+ reoff = reon + 1;
+ if (reon > 0x0f)
+ return -1;
+ if (reoff > 0x3f)
+ return -1;
+
+ cson = ps_to_rfbi_ticks(t->cs_on_time, div);
+ csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
+ if (csoff <= cson)
+ csoff = cson + 1;
+ if (csoff < max(weoff, reoff))
+ csoff = max(weoff, reoff);
+ if (cson > 0x0f)
+ return -1;
+ if (csoff > 0x3f)
+ return -1;
+
+ l = cson;
+ l |= csoff << 4;
+ l |= weon << 10;
+ l |= weoff << 14;
+ l |= reon << 20;
+ l |= reoff << 24;
+
+ t->tim[0] = l;
+
+ actim = ps_to_rfbi_ticks(t->access_time, div);
+ if (actim <= reon)
+ actim = reon + 1;
+ if (actim > 0x3f)
+ return -1;
+
+ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
+ if (wecyc < weoff)
+ wecyc = weoff;
+ if (wecyc > 0x3f)
+ return -1;
+
+ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
+ if (recyc < reoff)
+ recyc = reoff;
+ if (recyc > 0x3f)
+ return -1;
+
+ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
+ if (cs_pulse > 0x3f)
+ return -1;
+
+ l = wecyc;
+ l |= recyc << 6;
+ l |= cs_pulse << 12;
+ l |= actim << 22;
+
+ t->tim[1] = l;
+
+ t->tim[2] = div - 1;
+
+ t->converted = 1;
+
+ return 0;
+}
+
+/* xxx FIX module selection missing */
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+ unsigned hs_pulse_time, unsigned vs_pulse_time,
+ int hs_pol_inv, int vs_pol_inv, int extif_div)
+{
+ int hs, vs;
+ int min;
+ u32 l;
+
+ hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
+ vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
+ if (hs < 2)
+ return -EDOM;
+ if (mode == OMAP_DSS_RFBI_TE_MODE_2)
+ min = 2;
+ else /* OMAP_DSS_RFBI_TE_MODE_1 */
+ min = 4;
+ if (vs < min)
+ return -EDOM;
+ if (vs == hs)
+ return -EINVAL;
+ rfbi.te_mode = mode;
+ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n",
+ mode, hs, vs, hs_pol_inv, vs_pol_inv);
+
+ rfbi_enable_clocks(1);
+ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
+ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
+
+ l = rfbi_read_reg(RFBI_CONFIG(0));
+ if (hs_pol_inv)
+ l &= ~(1 << 21);
+ else
+ l |= 1 << 21;
+ if (vs_pol_inv)
+ l &= ~(1 << 20);
+ else
+ l |= 1 << 20;
+ rfbi_enable_clocks(0);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_setup_te);
+
+/* xxx FIX module selection missing */
+int omap_rfbi_enable_te(bool enable, unsigned line)
+{
+ u32 l;
+
+ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode);
+ if (line > (1 << 11) - 1)
+ return -EINVAL;
+
+ rfbi_enable_clocks(1);
+ l = rfbi_read_reg(RFBI_CONFIG(0));
+ l &= ~(0x3 << 2);
+ if (enable) {
+ rfbi.te_enabled = 1;
+ l |= rfbi.te_mode << 2;
+ } else
+ rfbi.te_enabled = 0;
+ rfbi_write_reg(RFBI_CONFIG(0), l);
+ rfbi_write_reg(RFBI_LINE_NUMBER, line);
+ rfbi_enable_clocks(0);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_rfbi_enable_te);
+
+#if 0
+static void rfbi_enable_config(int enable1, int enable2)
+{
+ u32 l;
+ int cs = 0;
+
+ if (enable1)
+ cs |= 1<<0;
+ if (enable2)
+ cs |= 1<<1;
+
+ rfbi_enable_clocks(1);
+
+ l = rfbi_read_reg(RFBI_CONTROL);
+
+ l = FLD_MOD(l, cs, 3, 2);
+ l = FLD_MOD(l, 0, 1, 1);
+
+ rfbi_write_reg(RFBI_CONTROL, l);
+
+
+ l = rfbi_read_reg(RFBI_CONFIG(0));
+ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
+ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
+ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
+
+ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
+ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
+ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
+
+ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
+ rfbi_write_reg(RFBI_CONFIG(0), l);
+
+ rfbi_enable_clocks(0);
+}
+#endif
+
+int rfbi_configure(int rfbi_module, int bpp, int lines)
+{
+ u32 l;
+ int cycle1 = 0, cycle2 = 0, cycle3 = 0;
+ enum omap_rfbi_cycleformat cycleformat;
+ enum omap_rfbi_datatype datatype;
+ enum omap_rfbi_parallelmode parallelmode;
+
+ switch (bpp) {
+ case 12:
+ datatype = OMAP_DSS_RFBI_DATATYPE_12;
+ break;
+ case 16:
+ datatype = OMAP_DSS_RFBI_DATATYPE_16;
+ break;
+ case 18:
+ datatype = OMAP_DSS_RFBI_DATATYPE_18;
+ break;
+ case 24:
+ datatype = OMAP_DSS_RFBI_DATATYPE_24;
+ break;
+ default:
+ BUG();
+ return 1;
+ }
+ rfbi.datatype = datatype;
+
+ switch (lines) {
+ case 8:
+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8;
+ break;
+ case 9:
+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9;
+ break;
+ case 12:
+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12;
+ break;
+ case 16:
+ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16;
+ break;
+ default:
+ BUG();
+ return 1;
+ }
+ rfbi.parallelmode = parallelmode;
+
+ if ((bpp % lines) == 0) {
+ switch (bpp / lines) {
+ case 1:
+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1;
+ break;
+ case 2:
+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1;
+ break;
+ case 3:
+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1;
+ break;
+ default:
+ BUG();
+ return 1;
+ }
+ } else if ((2 * bpp % lines) == 0) {
+ if ((2 * bpp / lines) == 3)
+ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2;
+ else {
+ BUG();
+ return 1;
+ }
+ } else {
+ BUG();
+ return 1;
+ }
+
+ switch (cycleformat) {
+ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1:
+ cycle1 = lines;
+ break;
+
+ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1:
+ cycle1 = lines;
+ cycle2 = lines;
+ break;
+
+ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1:
+ cycle1 = lines;
+ cycle2 = lines;
+ cycle3 = lines;
+ break;
+
+ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2:
+ cycle1 = lines;
+ cycle2 = (lines / 2) | ((lines / 2) << 16);
+ cycle3 = (lines << 16);
+ break;
+ }
+
+ rfbi_enable_clocks(1);
+
+ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */
+
+ l = 0;
+ l |= FLD_VAL(parallelmode, 1, 0);
+ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */
+ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */
+ l |= FLD_VAL(datatype, 6, 5);
+ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
+ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */
+ l |= FLD_VAL(cycleformat, 10, 9);
+ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */
+ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */
+ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */
+ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */
+ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */
+ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */
+ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */
+ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l);
+
+ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1);
+ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2);
+ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3);
+
+
+ l = rfbi_read_reg(RFBI_CONTROL);
+ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */
+ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */
+ rfbi_write_reg(RFBI_CONTROL, l);
+
+
+ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n",
+ bpp, lines, cycle1, cycle2, cycle3);
+
+ rfbi_enable_clocks(0);
+
+ return 0;
+}
+EXPORT_SYMBOL(rfbi_configure);
+
+static int rfbi_find_display(struct omap_dss_device *dssdev)
+{
+ if (dssdev == rfbi.dssdev[0])
+ return 0;
+
+ if (dssdev == rfbi.dssdev[1])
+ return 1;
+
+ BUG();
+ return -1;
+}
+
+
+static void signal_fifo_waiters(void)
+{
+ if (atomic_read(&rfbi.cmd_fifo_full) > 0) {
+ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */
+ complete(&rfbi.cmd_done);
+ atomic_dec(&rfbi.cmd_fifo_full);
+ }
+}
+
+/* returns 1 for async op, and 0 for sync op */
+static int do_update(struct omap_dss_device *dssdev, struct update_region *upd)
+{
+ u16 x = upd->x;
+ u16 y = upd->y;
+ u16 w = upd->w;
+ u16 h = upd->h;
+
+ perf_mark_setup();
+
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ /*dssdev->driver->enable_te(dssdev, 1); */
+ dss_setup_partial_planes(dssdev, &x, &y, &w, &h);
+ }
+
+#ifdef MEASURE_PERF
+ rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */
+#endif
+
+ dssdev->driver->setup_update(dssdev, x, y, w, h);
+
+ if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
+ rfbi_transfer_area(w, h, NULL, NULL);
+ return 1;
+ } else {
+ struct omap_overlay *ovl;
+ void __iomem *addr;
+ int scr_width;
+
+ ovl = dssdev->manager->overlays[0];
+ scr_width = ovl->info.screen_width;
+ addr = ovl->info.vaddr;
+
+ omap_rfbi_write_pixels(addr, scr_width, x, y, w, h);
+
+ perf_show("L4");
+
+ return 0;
+ }
+}
+
+static void process_cmd_fifo(void)
+{
+ int len;
+ struct update_param p;
+ struct omap_dss_device *dssdev;
+ unsigned long flags;
+
+ if (atomic_inc_return(&rfbi.cmd_pending) != 1)
+ return;
+
+ while (true) {
+ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+
+ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p,
+ sizeof(struct update_param));
+ if (len == 0) {
+ DSSDBG("nothing more in fifo\n");
+ atomic_set(&rfbi.cmd_pending, 0);
+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ break;
+ }
+
+ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/
+
+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+ BUG_ON(len != sizeof(struct update_param));
+ BUG_ON(p.rfbi_module > 1);
+
+ dssdev = rfbi.dssdev[p.rfbi_module];
+
+ if (p.cmd == RFBI_CMD_UPDATE) {
+ if (do_update(dssdev, &p.par.r))
+ break; /* async op */
+ } else if (p.cmd == RFBI_CMD_SYNC) {
+ DSSDBG("Signaling SYNC done!\n");
+ complete(p.par.sync);
+ } else
+ BUG();
+ }
+
+ signal_fifo_waiters();
+}
+
+static void rfbi_push_cmd(struct update_param *p)
+{
+ int ret;
+
+ while (1) {
+ unsigned long flags;
+ int available;
+
+ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags);
+ available = RFBI_CMD_FIFO_LEN_BYTES -
+ __kfifo_len(rfbi.cmd_fifo);
+
+/* DSSDBG("%d bytes left in fifo\n", available); */
+ if (available < sizeof(struct update_param)) {
+ DSSDBG("Going to wait because FIFO FULL..\n");
+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+ atomic_inc(&rfbi.cmd_fifo_full);
+ wait_for_completion(&rfbi.cmd_done);
+ /*DSSDBG("Woke up because fifo not full anymore\n");*/
+ continue;
+ }
+
+ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p,
+ sizeof(struct update_param));
+/* DSSDBG("pushed %d bytes\n", ret);*/
+
+ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags);
+
+ BUG_ON(ret != sizeof(struct update_param));
+
+ break;
+ }
+}
+
+static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h)
+{
+ struct update_param p;
+
+ p.rfbi_module = rfbi_module;
+ p.cmd = RFBI_CMD_UPDATE;
+
+ p.par.r.x = x;
+ p.par.r.y = y;
+ p.par.r.w = w;
+ p.par.r.h = h;
+
+ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h);
+
+ rfbi_push_cmd(&p);
+
+ process_cmd_fifo();
+}
+
+static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp)
+{
+ struct update_param p;
+
+ p.rfbi_module = rfbi_module;
+ p.cmd = RFBI_CMD_SYNC;
+ p.par.sync = sync_comp;
+
+ rfbi_push_cmd(&p);
+
+ DSSDBG("RFBI sync pushed to cmd fifo\n");
+
+ process_cmd_fifo();
+}
+
+void rfbi_dump_regs(struct seq_file *s)
+{
+#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
+
+ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
+
+ DUMPREG(RFBI_REVISION);
+ DUMPREG(RFBI_SYSCONFIG);
+ DUMPREG(RFBI_SYSSTATUS);
+ DUMPREG(RFBI_CONTROL);
+ DUMPREG(RFBI_PIXEL_CNT);
+ DUMPREG(RFBI_LINE_NUMBER);
+ DUMPREG(RFBI_CMD);
+ DUMPREG(RFBI_PARAM);
+ DUMPREG(RFBI_DATA);
+ DUMPREG(RFBI_READ);
+ DUMPREG(RFBI_STATUS);
+
+ DUMPREG(RFBI_CONFIG(0));
+ DUMPREG(RFBI_ONOFF_TIME(0));
+ DUMPREG(RFBI_CYCLE_TIME(0));
+ DUMPREG(RFBI_DATA_CYCLE1(0));
+ DUMPREG(RFBI_DATA_CYCLE2(0));
+ DUMPREG(RFBI_DATA_CYCLE3(0));
+
+ DUMPREG(RFBI_CONFIG(1));
+ DUMPREG(RFBI_ONOFF_TIME(1));
+ DUMPREG(RFBI_CYCLE_TIME(1));
+ DUMPREG(RFBI_DATA_CYCLE1(1));
+ DUMPREG(RFBI_DATA_CYCLE2(1));
+ DUMPREG(RFBI_DATA_CYCLE3(1));
+
+ DUMPREG(RFBI_VSYNC_WIDTH);
+ DUMPREG(RFBI_HSYNC_WIDTH);
+
+ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+#undef DUMPREG
+}
+
+int rfbi_init(void)
+{
+ u32 rev;
+ u32 l;
+
+ spin_lock_init(&rfbi.cmd_lock);
+ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL,
+ &rfbi.cmd_lock);
+ if (IS_ERR(rfbi.cmd_fifo))
+ return -ENOMEM;
+
+ init_completion(&rfbi.cmd_done);
+ atomic_set(&rfbi.cmd_fifo_full, 0);
+ atomic_set(&rfbi.cmd_pending, 0);
+
+ rfbi.base = ioremap(RFBI_BASE, SZ_256);
+ if (!rfbi.base) {
+ DSSERR("can't ioremap RFBI\n");
+ return -ENOMEM;
+ }
+
+ rfbi_enable_clocks(1);
+
+ msleep(10);
+
+ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000;
+
+ /* Enable autoidle and smart-idle */
+ l = rfbi_read_reg(RFBI_SYSCONFIG);
+ l |= (1 << 0) | (2 << 3);
+ rfbi_write_reg(RFBI_SYSCONFIG, l);
+
+ rev = rfbi_read_reg(RFBI_REVISION);
+ printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
+
+ rfbi_enable_clocks(0);
+
+ return 0;
+}
+
+void rfbi_exit(void)
+{
+ DSSDBG("rfbi_exit\n");
+
+ kfifo_free(rfbi.cmd_fifo);
+
+ iounmap(rfbi.base);
+}
+
+/* struct omap_display support */
+static int rfbi_display_update(struct omap_dss_device *dssdev,
+ u16 x, u16 y, u16 w, u16 h)
+{
+ int rfbi_module;
+
+ if (w == 0 || h == 0)
+ return 0;
+
+ rfbi_module = rfbi_find_display(dssdev);
+
+ rfbi_push_update(rfbi_module, x, y, w, h);
+
+ return 0;
+}
+
+static int rfbi_display_sync(struct omap_dss_device *dssdev)
+{
+ struct completion sync_comp;
+ int rfbi_module;
+
+ rfbi_module = rfbi_find_display(dssdev);
+
+ init_completion(&sync_comp);
+ rfbi_push_sync(rfbi_module, &sync_comp);
+ DSSDBG("Waiting for SYNC to happen...\n");
+ wait_for_completion(&sync_comp);
+ DSSDBG("Released from SYNC\n");
+ return 0;
+}
+
+static int rfbi_display_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+ dssdev->driver->enable_te(dssdev, enable);
+ return 0;
+}
+
+static int rfbi_display_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ r = omap_dss_start_device(dssdev);
+ if (r) {
+ DSSERR("failed to start device\n");
+ goto err0;
+ }
+
+ r = omap_dispc_register_isr(framedone_callback, NULL,
+ DISPC_IRQ_FRAMEDONE);
+ if (r) {
+ DSSERR("can't get FRAMEDONE irq\n");
+ goto err1;
+ }
+
+ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
+
+ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI);
+
+ dispc_set_tft_data_lines(dssdev->ctrl.pixel_size);
+
+ rfbi_configure(dssdev->phy.rfbi.channel,
+ dssdev->ctrl.pixel_size,
+ dssdev->phy.rfbi.data_lines);
+
+ rfbi_set_timings(dssdev->phy.rfbi.channel,
+ &dssdev->ctrl.rfbi_timings);
+
+
+ if (dssdev->driver->enable) {
+ r = dssdev->driver->enable(dssdev);
+ if (r)
+ goto err2;
+ }
+
+ return 0;
+err2:
+ omap_dispc_unregister_isr(framedone_callback, NULL,
+ DISPC_IRQ_FRAMEDONE);
+err1:
+ omap_dss_stop_device(dssdev);
+err0:
+ return r;
+}
+
+static void rfbi_display_disable(struct omap_dss_device *dssdev)
+{
+ dssdev->driver->disable(dssdev);
+ omap_dispc_unregister_isr(framedone_callback, NULL,
+ DISPC_IRQ_FRAMEDONE);
+ omap_dss_stop_device(dssdev);
+}
+
+int rfbi_init_display(struct omap_dss_device *dssdev)
+{
+ dssdev->enable = rfbi_display_enable;
+ dssdev->disable = rfbi_display_disable;
+ dssdev->update = rfbi_display_update;
+ dssdev->sync = rfbi_display_sync;
+ dssdev->enable_te = rfbi_display_enable_te;
+
+ rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
+
+ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+
+ return 0;
+}
--
1.6.5.1


\
 
 \ /
  Last update: 2009-11-09 12:51    [W:0.928 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site