lkml.org 
[lkml]   [2009]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] drivers/net/wireless: correct check on CCS_START_NETWORK
From: Julia Lawall <julia@diku.dk>

CCS_START_NETWORK is declared in drivers/net/wireless/rayctl.h with the
comment Values for cmd. status is previously compared to
CCS_COMMAND_COMPLETE, which is declared in the same file with the comment
Values for buffer_status. Finally, it is possible at this point that cmd
is CCS_START_NETWORK, because it is compared to that value in an enclosing
switch that has CCS_START_NETWORK as one of two case labels around this code.

Signed-off-by: Julia Lawall <julia@diku.dk>

---
drivers/net/wireless/ray_cs.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 1c88c2e..5ee9d2a 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -2074,7 +2074,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
del_timer(&local->timer);
local->timer.expires = jiffies + HZ * 5;
local->timer.data = (long)local;
- if (status == CCS_START_NETWORK) {
+ if (cmd == CCS_START_NETWORK) {
DEBUG(0,
"ray_cs interrupt network \"%s\" start failed\n",
local->sparm.b4.a_current_ess_id);

\
 
 \ /
  Last update: 2009-11-08 09:25    [W:0.070 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site