[lkml]   [2009]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH 0/4] DVB: firedtv: port to new firewire driver stack
    The following patch series adapts the firedtv driver for
    FireWire-attached DVB boxes and cards to the newer firewire-core kernel
    API. The driver will continue to work with the older ieee1394 kernel
    API as well. Which of the two IEEE 1394 stacks will be used depends on
    which one was configured at build time. If both were built, firedtv
    transparently uses the stack which is bound to the FireWire controller.

    This patch series depends on changes to firewire-core which were merged
    into Linux 2.6.31.

    There is some non-essential functionality yet to implement:
    - Finish FCP support in firewire-core so that more than one AV/C
    device can be used on the same FireWire bus at the same time.
    - Enhance firedtv to use firewire-core's channel and bandwidth
    allocation function for proper cooperation with non-FireDTV AV/C
    devices on the same bus.

    Following as reply:
    [PATCH 1/4] firedtv: move remote control workqueue handling into rc source file
    [PATCH 2/4] firedtv: reform lock transaction backend call
    [PATCH 3/4] firedtv: add missing include, rename a constant
    [PATCH 4/4] firedtv: port to new firewire core

    drivers/media/dvb/firewire/Kconfig | 7
    drivers/media/dvb/firewire/Makefile | 1
    drivers/media/dvb/firewire/firedtv-1394.c | 37 +-
    drivers/media/dvb/firewire/firedtv-avc.c | 50 +-
    drivers/media/dvb/firewire/firedtv-dvb.c | 15
    drivers/media/dvb/firewire/firedtv-fw.c | 385 ++++++++++++++++++++++
    drivers/media/dvb/firewire/firedtv-rc.c | 2
    drivers/media/dvb/firewire/firedtv.h | 17
    8 files changed, 471 insertions(+), 43 deletions(-)
    Stefan Richter
    -=====-==--= =-== -=---

     \ /
      Last update: 2009-11-08 22:31    [W:0.019 / U:15.664 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site