Messages in this thread | | | Date | Mon, 30 Nov 2009 17:44:32 +0900 | From | Kenji Kaneshige <> | Subject | Re: [PATCH 0/9] pci: update pci bridge resource to get more big range for devices under it - v13 |
| |
Yinghai Lu wrote: > Kenji Kaneshige wrote: >> Yinghai Lu wrote: >>> Kenji Kaneshige wrote: >>>> My system doesn't boot (hangup) with the following error messages >>>> from Fusion MPT SAS driver. Those are different from the one >>>> captured with the previous version of your patches. >>>> >>>> >>>> Fusion MPT SAS Host driver 3.04.12 >>>> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>>> mptbase: ioc0: Initiating bringup >>>> mptbase: ioc0: WARNING - Unexpected doorbell active! >>>> mptbase: ioc0: ERROR - Failed to come READY after reset! >>>> IocState=f0000000 >>>> mptbase: ioc0: WARNING - ResetHistory bit failed to clear! >>>> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh) >>>> mptbase: ioc0: WARNING - NOT READY WARNING! >>>> mptbase: ioc0: ERROR - didn't initialize properly! (-1) >>>> mptsas: probe of 0000:09:00.0 failed with error -1 >>>> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >>>> mptbase: ioc1: Initiating bringup >>>> mptbase: ioc1: WARNING - Unexpected doorbell active! >>>> mptbase: ioc1: ERROR - Failed to come READY after reset! >>>> IocState=f0000000 >>>> mptbase: ioc1: WARNING - ResetHistory bit failed to clear! >>>> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh) >>>> mptbase: ioc1: WARNING - NOT READY WARNING! >>>> mptbase: ioc1: ERROR - didn't initialize properly! (-1) >>>> mptsas: probe of 0000:0a:00.0 failed with error -1 >>>> >>>> >>>> I'll send the whole boot log privately. >>> thanks, at the same time please try "debug pci=try=1" >>> >> I confirmed system boot up without errors by "pci=try=1". >> I'll capture the bootlog with "debug" option and send it >> to you soon. > > Please also try "debug pci=try=7" > it should work too. >
I confirmed it works. I will send the whole boot log soon.
Thanks, Kenji Kaneshige
| |