lkml.org 
[lkml]   [2009]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] drivers/block/floppy.c: stylistic cleanups
From
Date
On Mon, 2009-11-30 at 09:28 -0800, Stephen Hemminger wrote:
> Rather than playing with the dangling operator format which seems to be a coding
> style that only David cares about. Why not go through and fix the really ugly old
> drivers that need it. For a good horror experience, go look at the floppy driver.

Just for you Stephen, here's a cleaned up version.
Now to see if it gets applied, which I rather doubt.

Changes:

Removed macro definitions and uses of
IN, OUT, LAST_OUT, CLEARSTRUCT, and CHECK_RESET
Used C99 initializers
Removed assigns from if statements
Converted printks without KERN_ levels to pr_info and pr_cont
Removed unnecessary braces
Used print_hex_dump
Moved leading logical tests to end of previous line
Surrounded still ugly CALL and ECALL macro with do {} while (0)

Checkpatch complaints before:
total: 393 errors, 132 warnings, 4647 lines checked

after:
total: 1 errors, 11 warnings, 5352 lines checked

Compile tested only, x86 allyesconfig

Signed-off-by: Joe Perches <joe@perches.com>

drivers/block/floppy.c | 1853 +++++++++++++++++++++++++++++++++---------------
1 files changed, 1279 insertions(+), 574 deletions(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 5c01f74..4521582 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -150,7 +150,7 @@
#define REALLY_SLOW_IO

#define DEBUGT 2
-#define DCL_DEBUG /* debug disk change line */
+#define DCL_DEBUG /* debug disk change line */

/* do print messages for unexpected interrupts */
static int print_unex = 1;
@@ -180,6 +180,8 @@ static int print_unex = 1;
#include <linux/mod_devicetable.h>
#include <linux/buffer_head.h> /* for invalidate_buffers() */
#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>

/*
* PS/2 floppies have much slower step rates than regular floppies.
@@ -191,8 +193,6 @@ static int slow_floppy;
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>

static int FLOPPY_IRQ = 6;
static int FLOPPY_DMA = 2;
@@ -250,7 +250,7 @@ static int irqdma_allocated;

static struct request *current_req;
static struct request_queue *floppy_queue;
-static void do_fd_request(struct request_queue * q);
+static void do_fd_request(struct request_queue *q);

#ifndef fd_get_dma_residue
#define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
@@ -263,7 +263,7 @@ static void do_fd_request(struct request_queue * q);
#endif

#ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
#endif

static inline void fallback_on_nodma_alloc(char **addr, size_t l)
@@ -273,7 +273,7 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
return; /* we have the memory */
if (can_use_virtual_dma != 2)
return; /* no fallback allowed */
- printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+ pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
*addr = (char *)nodma_mem_alloc(l);
#else
return;
@@ -285,57 +285,57 @@ static inline void fallback_on_nodma_alloc(char **addr, size_t l)
static unsigned long fake_change;
static int initialising = 1;

-#define ITYPE(x) (((x)>>2) & 0x1f)
+#define ITYPE(x) (((x) >> 2) & 0x1f)
#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
#define UNIT(x) ((x) & 0x03) /* drive on fdc */
#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
/* reverse mapping from unit and fdc to drive */
#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
-#define SETF(x) set_bit(x##_BIT, &DRS->flags)
-#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
-
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
-#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
-#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
-
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
-
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)

-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+#define DP (&drive_params[current_drive])
+#define DRS (&drive_state[current_drive])
+#define DRWE (&write_errors[current_drive])
+#define FDCS (&fdc_state[fdc])
+#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
+#define SETF(x) set_bit(x##_BIT, &DRS->flags)
+#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
+
+#define UDP (&drive_params[drive])
+#define UDRS (&drive_state[drive])
+#define UDRWE (&write_errors[drive])
+#define UFDCS (&fdc_state[FDC(drive)])
+#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
+#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
+#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
+
+#define DPRINT(format, args...) \
+ pr_info(DEVICE_NAME "%d: " format, current_drive, ##args)
+
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)

/* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND (raw_cmd->cmd[0])
+#define DR_SELECT (raw_cmd->cmd[1])
+#define TRACK (raw_cmd->cmd[2])
+#define HEAD (raw_cmd->cmd[3])
+#define SECTOR (raw_cmd->cmd[4])
+#define SIZECODE (raw_cmd->cmd[5])
+#define SECT_PER_TRACK (raw_cmd->cmd[6])
+#define GAP (raw_cmd->cmd[7])
+#define SIZECODE2 (raw_cmd->cmd[8])
#define NR_RW 9

/* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE (raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP (raw_cmd->cmd[4])
+#define F_FILL (raw_cmd->cmd[5])
#define NR_F 6

/*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
* [Now it is rather a minimum]
*/
#define MAX_DISK_SIZE 4 /* 3984 */
@@ -345,63 +345,244 @@ static int initialising = 1;
*/
#define MAX_REPLIES 16
static unsigned char reply_buffer[MAX_REPLIES];
-static int inr; /* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+static int inr; /* size of reply buffer, when called from interrupt */
+
+#define ST0 (reply_buffer[0])
+#define ST1 (reply_buffer[1])
+#define ST2 (reply_buffer[2])
+#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
+#define R_TRACK (reply_buffer[3])
+#define R_HEAD (reply_buffer[4])
+#define R_SECTOR (reply_buffer[5])
+#define R_SIZECODE (reply_buffer[6])
+#define SEL_DLY (2 * HZ / 100)

/*
* this struct defines the different floppy drive types.
*/
-static struct {
+struct drive_params {
struct floppy_drive_params params;
const char *name; /* name printed while booting */
-} default_drive_params[] = {
-/* NOTE: the time values in jiffies should be in msec!
- CMOS drive type
- | Maximum data rate supported by drive type
- | | Head load time, msec
- | | | Head unload time, msec (not used)
- | | | | Step rate interval, usec
- | | | | | Time needed for spinup time (jiffies)
- | | | | | | Timeout for spinning down (jiffies)
- | | | | | | | Spindown offset (where disk stops)
- | | | | | | | | Select delay
- | | | | | | | | | RPS
- | | | | | | | | | | Max number of tracks
- | | | | | | | | | | | Interrupt timeout
- | | | | | | | | | | | | Max nonintlv. sectors
- | | | | | | | | | | | | | -Max Errors- flags */
-{{0, 500, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 80, 3*HZ, 20, {3,1,2,0,2}, 0,
- 0, { 7, 4, 8, 2, 1, 5, 3,10}, 3*HZ/2, 0 }, "unknown" },
-
-{{1, 300, 16, 16, 8000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 40, 3*HZ, 17, {3,1,2,0,2}, 0,
- 0, { 1, 0, 0, 0, 0, 0, 0, 0}, 3*HZ/2, 1 }, "360K PC" }, /*5 1/4 360 KB PC*/
-
-{{2, 500, 16, 16, 6000, 4*HZ/10, 3*HZ, 14, SEL_DLY, 6, 83, 3*HZ, 17, {3,1,2,0,2}, 0,
- 0, { 2, 5, 6,23,10,20,12, 0}, 3*HZ/2, 2 }, "1.2M" }, /*5 1/4 HD AT*/
-
-{{3, 250, 16, 16, 3000, 1*HZ, 3*HZ, 0, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0,
- 0, { 4,22,21,30, 3, 0, 0, 0}, 3*HZ/2, 4 }, "720k" }, /*3 1/2 DD*/
-
-{{4, 500, 16, 16, 4000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 20, {3,1,2,0,2}, 0,
- 0, { 7, 4,25,22,31,21,29,11}, 3*HZ/2, 7 }, "1.44M" }, /*3 1/2 HD*/
-
-{{5, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0,
- 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M AMI BIOS" }, /*3 1/2 ED*/
-
-{{6, 1000, 15, 8, 3000, 4*HZ/10, 3*HZ, 10, SEL_DLY, 5, 83, 3*HZ, 40, {3,1,2,0,2}, 0,
- 0, { 7, 8, 4,25,28,22,31,21}, 3*HZ/2, 8 }, "2.88M" } /*3 1/2 ED*/
-/* | --autodetected formats--- | | |
- * read_track | | Name printed when booting
- * | Native format
- * Frequency of disk change checks */
+};
+
+static struct drive_params default_drive_params[] = {
+/* NOTE: the time values in jiffies should be in msec! */
+ {
+ .params = {
+ .cmos = 0,
+ .max_dtr = 500,
+ .hlt = 16,
+ .hut = 16,
+ .srt = 8000,
+ .spinup = 1 * HZ,
+ .spindown = 3 * HZ,
+ .spindown_offset = 0,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 80,
+ .timeout = 3 * HZ,
+ .interleave_sect = 20,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {7, 4, 8, 2, 1, 5, 3, 10},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 0
+ },
+ .name = "unknown"
+ },
+
+ { /*5 1/4 360 KB PC */
+ .params = {
+ .cmos = 1,
+ .max_dtr = 300,
+ .hlt = 16,
+ .hut = 16,
+ .srt = 8000,
+ .spinup = 1 * HZ,
+ .spindown = 3 * HZ,
+ .spindown_offset = 0,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 40,
+ .timeout = 3 * HZ,
+ .interleave_sect = 17,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {1, 0, 0, 0, 0, 0, 0, 0},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 1
+ },
+ .name = "360K PC"
+ },
+
+ { /*5 1/4 HD AT */
+ .params = {
+ .cmos = 2,
+ .max_dtr = 500,
+ .hlt = 16,
+ .hut = 16,
+ .srt = 6000,
+ .spinup = 4 * HZ / 10,
+ .spindown = 3 * HZ,
+ .spindown_offset = 14,
+ .select_delay = SEL_DLY,
+ .rps = 6,
+ .tracks = 83,
+ .timeout = 3 * HZ,
+ .interleave_sect = 17,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {2, 5, 6, 23, 10, 20, 12, 0},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 2
+ },
+ .name = "1.2M"
+ },
+
+ { /*3 1/2 DD */
+ .params = {
+ .cmos = 3,
+ .max_dtr = 250,
+ .hlt = 16,
+ .hut = 16,
+ .srt = 3000,
+ .spinup = 1 * HZ,
+ .spindown = 3 * HZ,
+ .spindown_offset = 0,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 83,
+ .timeout = 3 * HZ,
+ .interleave_sect = 20,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {4, 22, 21, 30, 3, 0, 0, 0},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 4
+ },
+ .name = "720k"
+ },
+
+ { /*3 1/2 HD */
+ .params = {
+ .cmos = 4,
+ .max_dtr = 500,
+ .hlt = 16,
+ .hut = 16,
+ .srt = 4000,
+ .spinup = 4 * HZ / 10,
+ .spindown = 3 * HZ,
+ .spindown_offset = 10,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 83,
+ .timeout = 3 * HZ,
+ .interleave_sect = 20,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {7, 4, 25, 22, 31, 21, 29, 11},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 7
+ },
+ .name = "1.44M"
+ },
+
+ { /*3 1/2 ED */
+ .params = {
+ .cmos = 5,
+ .max_dtr = 1000,
+ .hlt = 15,
+ .hut = 8,
+ .srt = 3000,
+ .spinup = 4 * HZ / 10,
+ .spindown = 3 * HZ,
+ .spindown_offset = 10,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 83,
+ .timeout = 3 * HZ,
+ .interleave_sect = 40,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {7, 8, 4, 25, 28, 22, 31, 21},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 8
+ },
+ .name = "2.88M AMI BIOS"
+ },
+
+ { /*3 1/2 ED */
+ .params = {
+ .cmos = 6,
+ .max_dtr = 1000,
+ .hlt = 15,
+ .hut = 8,
+ .srt = 3000,
+ .spinup = 4 * HZ / 10,
+ .spindown = 3 * HZ,
+ .spindown_offset = 10,
+ .select_delay = SEL_DLY,
+ .rps = 5,
+ .tracks = 83,
+ .timeout = 3 * HZ,
+ .interleave_sect = 40,
+ .max_errors = {
+ .abort = 3,
+ .read_track = 1,
+ .reset = 2,
+ .recal = 0,
+ .reporting = 2
+ },
+ .flags = 0,
+ .read_track = 0,
+ .autodetect = {7, 8, 4, 25, 28, 22, 31, 21},
+ .checkfreq = 3 * HZ / 2,
+ .native_format = 8
+ },
+ .name = "2.88M"
+ }
};

static struct floppy_drive_params drive_params[N_DRIVE];
@@ -434,52 +615,391 @@ static struct floppy_raw_cmd *raw_cmd, default_raw_cmd;
*
* Other parameters should be self-explanatory (see also setfdprm(8)).
*/
-/*
- Size
- | Sectors per track
- | | Head
- | | | Tracks
- | | | | Stretch
- | | | | | Gap 1 size
- | | | | | | Data rate, | 0x40 for perp
- | | | | | | | Spec1 (stepping rate, head unload
- | | | | | | | | /fmt gap (gap2) */
-static struct floppy_struct floppy_type[32] = {
- { 0, 0,0, 0,0,0x00,0x00,0x00,0x00,NULL }, /* 0 no testing */
- { 720, 9,2,40,0,0x2A,0x02,0xDF,0x50,"d360" }, /* 1 360KB PC */
- { 2400,15,2,80,0,0x1B,0x00,0xDF,0x54,"h1200" }, /* 2 1.2MB AT */
- { 720, 9,1,80,0,0x2A,0x02,0xDF,0x50,"D360" }, /* 3 360KB SS 3.5" */
- { 1440, 9,2,80,0,0x2A,0x02,0xDF,0x50,"D720" }, /* 4 720KB 3.5" */
- { 720, 9,2,40,1,0x23,0x01,0xDF,0x50,"h360" }, /* 5 360KB AT */
- { 1440, 9,2,80,0,0x23,0x01,0xDF,0x50,"h720" }, /* 6 720KB AT */
- { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,"H1440" }, /* 7 1.44MB 3.5" */
- { 5760,36,2,80,0,0x1B,0x43,0xAF,0x54,"E2880" }, /* 8 2.88MB 3.5" */
- { 6240,39,2,80,0,0x1B,0x43,0xAF,0x28,"E3120" }, /* 9 3.12MB 3.5" */
-
- { 2880,18,2,80,0,0x25,0x00,0xDF,0x02,"h1440" }, /* 10 1.44MB 5.25" */
- { 3360,21,2,80,0,0x1C,0x00,0xCF,0x0C,"H1680" }, /* 11 1.68MB 3.5" */
- { 820,10,2,41,1,0x25,0x01,0xDF,0x2E,"h410" }, /* 12 410KB 5.25" */
- { 1640,10,2,82,0,0x25,0x02,0xDF,0x2E,"H820" }, /* 13 820KB 3.5" */
- { 2952,18,2,82,0,0x25,0x00,0xDF,0x02,"h1476" }, /* 14 1.48MB 5.25" */
- { 3444,21,2,82,0,0x25,0x00,0xDF,0x0C,"H1722" }, /* 15 1.72MB 3.5" */
- { 840,10,2,42,1,0x25,0x01,0xDF,0x2E,"h420" }, /* 16 420KB 5.25" */
- { 1660,10,2,83,0,0x25,0x02,0xDF,0x2E,"H830" }, /* 17 830KB 3.5" */
- { 2988,18,2,83,0,0x25,0x00,0xDF,0x02,"h1494" }, /* 18 1.49MB 5.25" */
- { 3486,21,2,83,0,0x25,0x00,0xDF,0x0C,"H1743" }, /* 19 1.74 MB 3.5" */
-
- { 1760,11,2,80,0,0x1C,0x09,0xCF,0x00,"h880" }, /* 20 880KB 5.25" */
- { 2080,13,2,80,0,0x1C,0x01,0xCF,0x00,"D1040" }, /* 21 1.04MB 3.5" */
- { 2240,14,2,80,0,0x1C,0x19,0xCF,0x00,"D1120" }, /* 22 1.12MB 3.5" */
- { 3200,20,2,80,0,0x1C,0x20,0xCF,0x2C,"h1600" }, /* 23 1.6MB 5.25" */
- { 3520,22,2,80,0,0x1C,0x08,0xCF,0x2e,"H1760" }, /* 24 1.76MB 3.5" */
- { 3840,24,2,80,0,0x1C,0x20,0xCF,0x00,"H1920" }, /* 25 1.92MB 3.5" */
- { 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */
- { 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */
- { 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */
- { 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */
-
- { 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */
- { 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */
+ static struct floppy_struct floppy_type[32] = {
+ {
+ .size = 0,
+ .sect = 0,
+ .head = 0,
+ .track = 0,
+ .stretch = 0,
+ .gap = 0x00,
+ .rate = 0x00,
+ .spec1 = 0x00,
+ .fmt_gap = 0x00,
+ .name = NULL
+ }, /* 0 no testing */
+ {
+ .size = 720,
+ .sect = 9,
+ .head = 2,
+ .track = 40,
+ .stretch = 0,
+ .gap = 0x2A,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x50,
+ .name = "d360"
+ }, /* 1 360KB PC */
+ {
+ .size = 2400,
+ .sect = 15,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1B,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x54,
+ .name = "h1200"
+ }, /* 2 1.2MB AT */
+ {
+ .size = 720,
+ .sect = 9,
+ .head = 1,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x2A,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x50,
+ .name = "D360"
+ }, /* 3 360KB SS 3.5" */
+ {
+ .size = 1440,
+ .sect = 9,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x2A,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x50,
+ .name = "D720"
+ }, /* 4 720KB 3.5" */
+ {
+ .size = 720,
+ .sect = 9,
+ .head = 2,
+ .track = 40,
+ .stretch = 1,
+ .gap = 0x23,
+ .rate = 0x01,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x50,
+ .name = "h360"
+ }, /* 5 360KB AT */
+ {
+ .size = 1440,
+ .sect = 9,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x23,
+ .rate = 0x01,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x50,
+ .name = "h720"
+ }, /* 6 720KB AT */
+ {
+ .size = 2880,
+ .sect = 18,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1B,
+ .rate = 0x00,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x6C,
+ .name = "H1440"
+ }, /* 7 1.44MB 3.5" */
+ {
+ .size = 5760,
+ .sect = 36,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1B,
+ .rate = 0x43,
+ .spec1 = 0xAF,
+ .fmt_gap = 0x54,
+ .name = "E2880"
+ }, /* 8 2.88MB 3.5" */
+ {
+ .size = 6240,
+ .sect = 39,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1B,
+ .rate = 0x43,
+ .spec1 = 0xAF,
+ .fmt_gap = 0x28,
+ .name = "E3120"
+ }, /* 9 3.12MB 3.5" */
+ {
+ .size = 2880,
+ .sect = 18,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x02,
+ .name = "h1440"
+ }, /* 10 1.44MB 5.25" */
+ {
+ .size = 3360,
+ .sect = 21,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x00,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x0C,
+ .name = "H1680"
+ }, /* 11 1.68MB 3.5" */
+ {
+ .size = 820,
+ .sect = 10,
+ .head = 2,
+ .track = 41,
+ .stretch = 1,
+ .gap = 0x25,
+ .rate = 0x01,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x2E,
+ .name = "h410"
+ }, /* 12 410KB 5.25" */
+ {
+ .size = 1640,
+ .sect = 10,
+ .head = 2,
+ .track = 82,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x2E,
+ .name = "H820"
+ }, /* 13 820KB 3.5" */
+ {
+ .size = 2952,
+ .sect = 18,
+ .head = 2,
+ .track = 82,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x02,
+ .name = "h1476"
+ }, /* 14 1.48MB 5.25" */
+ {
+ .size = 3444,
+ .sect = 21,
+ .head = 2,
+ .track = 82,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x0C,
+ .name = "H1722"
+ }, /* 15 1.72MB 3.5" */
+ {
+ .size = 840,
+ .sect = 10,
+ .head = 2,
+ .track = 42,
+ .stretch = 1,
+ .gap = 0x25,
+ .rate = 0x01,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x2E,
+ .name = "h420"
+ }, /* 16 420KB 5.25" */
+ {
+ .size = 1660,
+ .sect = 10,
+ .head = 2,
+ .track = 83,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x2E,
+ .name = "H830"
+ }, /* 17 830KB 3.5" */
+ {
+ .size = 2988,
+ .sect = 18,
+ .head = 2,
+ .track = 83,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x02,
+ .name = "h1494"
+ }, /* 18 1.49MB 5.25" */
+ {
+ .size = 3486,
+ .sect = 21,
+ .head = 2,
+ .track = 83,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x00,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x0C,
+ .name = "H1743"
+ }, /* 19 1.74 MB 3.5" */
+ {
+ .size = 1760,
+ .sect = 11,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x09,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "h880"
+ }, /* 20 880KB 5.25" */
+ {
+ .size = 2080,
+ .sect = 13,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x01,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "D1040"
+ }, /* 21 1.04MB 3.5" */
+ {
+ .size = 2240,
+ .sect = 14,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x19,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "D1120"
+ }, /* 22 1.12MB 3.5" */
+ {
+ .size = 3200,
+ .sect = 20,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x20,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x2C,
+ .name = "h1600"
+ }, /* 23 1.6MB 5.25" */
+ {
+ .size = 3520,
+ .sect = 22,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x08,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x2e,
+ .name = "H1760"
+ }, /* 24 1.76MB 3.5" */
+ {
+ .size = 3840,
+ .sect = 24,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x20,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "H1920"
+ }, /* 25 1.92MB 3.5" */
+ {
+ .size = 6400,
+ .sect = 40,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x5B,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "E3200"
+ }, /* 26 3.20MB 3.5" */
+ {
+ .size = 7040,
+ .sect = 44,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x5B,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "E3520"
+ }, /* 27 3.52MB 3.5" */
+ {
+ .size = 7680,
+ .sect = 48,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x63,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "E3840"
+ }, /* 28 3.84MB 3.5" */
+ {
+ .size = 3680,
+ .sect = 23,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x10,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x00,
+ .name = "H1840"
+ }, /* 29 1.84MB 3.5" */
+ {
+ .size = 1600,
+ .sect = 10,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x25,
+ .rate = 0x02,
+ .spec1 = 0xDF,
+ .fmt_gap = 0x2E,
+ .name = "D800"
+ }, /* 30 800KB 3.5" */
+ {
+ .size = 3200,
+ .sect = 20,
+ .head = 2,
+ .track = 80,
+ .stretch = 0,
+ .gap = 0x1C,
+ .rate = 0x00,
+ .spec1 = 0xCF,
+ .fmt_gap = 0x2C,
+ .name = "H1600"
+ }, /* 31 1.6MB 3.5" */
};

#define SECTSIZE (_FD_SECTSIZE(*floppy))
@@ -505,9 +1025,9 @@ static char floppy_device_name[] = "floppy";
static int probing;

/* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE -1
+#define FD_COMMAND_ERROR 2
+#define FD_COMMAND_OKAY 3

static volatile int command_status = FD_COMMAND_NONE;
static unsigned long fdc_busy;
@@ -515,11 +1035,12 @@ static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
static DECLARE_WAIT_QUEUE_HEAD(command_done);

#define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
+
+#define CALL(x) do { if ((x) == -EINTR) return -EINTR; } while (0)
+#define ECALL(x) do { if ((ret = (x))) return ret; } while (0)
+#define _WAIT(x, i) CALL(ret = wait_til_done((x), i))
+#define WAIT(x) _WAIT((x), interruptible)
+#define IWAIT(x) _WAIT((x), 1)

/* Errors during formatting are counted here. */
static int format_errors;
@@ -545,8 +1066,9 @@ static int max_buffer_sectors;
static int *errors;
typedef void (*done_f)(int);
static struct cont_t {
- void (*interrupt)(void); /* this is called after the interrupt of the
- * main command */
+ void (*interrupt)(void);
+ /* this is called after the interrupt of the
+ * main command */
void (*redo)(void); /* this is called to retry the operation */
void (*error)(void); /* this is called to tally an error */
done_f done; /* this is called to say if the operation has
@@ -571,7 +1093,6 @@ static void floppy_release_irq_and_dma(void);
* reset doesn't need to be tested before sending commands, because
* output_byte is automatically disabled when reset is set.
*/
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
static void reset_fdc(void);

/*
@@ -624,14 +1145,19 @@ static inline void set_debugt(void)
static inline void debugt(const char *message)
{
if (DP->flags & DEBUGT)
- printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+ pr_info("%s dtime=%lu\n", message, jiffies - debugtimer);
}
#else
-static inline void set_debugt(void) { }
-static inline void debugt(const char *message) { }
+static inline void set_debugt(void)
+{
+}
+
+static inline void debugt(const char *message)
+{
+}
#endif /* DEBUGT */

-typedef void (*timeout_fn) (unsigned long);
+typedef void (*timeout_fn)(unsigned long);
static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);

static const char *timeout_message;
@@ -647,13 +1173,13 @@ static void is_alive(const char *message)
}
#endif

-static void (*do_floppy) (void) = NULL;
+static void (*do_floppy)(void) = NULL;

#ifdef FLOPPY_SANITY_CHECK

#define OLOGSIZE 20

-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
static unsigned long interruptjiffies;
static unsigned long resultjiffies;
static int resultsize;
@@ -683,9 +1209,7 @@ static void __reschedule_timeout(int drive, const char *message, int marg)
fd_timeout.expires = jiffies + UDP->timeout;
add_timer(&fd_timeout);
if (UDP->flags & FD_DEBUG) {
- DPRINT("reschedule timeout ");
- printk(message, marg);
- printk("\n");
+ DPRINT("reschedule timeout %s %d\n", message, marg);
}
timeout_message = message;
}
@@ -699,8 +1223,8 @@ static void reschedule_timeout(int drive, const char *message, int marg)
spin_unlock_irqrestore(&floppy_lock, flags);
}

-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)

/*
* Bottom half floppy driver.
@@ -807,9 +1331,8 @@ static int set_dor(int fdc, char mask, char data)
if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
drive = REVDRIVE(fdc, unit);
#ifdef DCL_DEBUG
- if (UDP->flags & FD_DEBUG) {
+ if (UDP->flags & FD_DEBUG)
DPRINT("calling disk change from set_dor\n");
- }
#endif
disk_change(drive);
}
@@ -857,7 +1380,7 @@ static void set_fdc(int drive)
current_drive = drive;
}
if (fdc != 1 && fdc != 0) {
- printk("bad fdc value\n");
+ pr_info("bad fdc value\n");
return;
}
set_dor(fdc, ~0, 8);
@@ -874,8 +1397,7 @@ static void set_fdc(int drive)
static int _lock_fdc(int drive, int interruptible, int line)
{
if (!usage_count) {
- printk(KERN_ERR
- "Trying to lock fdc while usage count=0 at line %d\n",
+ pr_err("Trying to lock fdc while usage count=0 at line %d\n",
line);
return -1;
}
@@ -909,10 +1431,12 @@ static int _lock_fdc(int drive, int interruptible, int line)
return 0;
}

-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
+#define lock_fdc(drive, interruptible) \
+ _lock_fdc(drive, interruptible, __LINE__)

-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define LOCK_FDC(drive, interruptible) \
+ if (lock_fdc(drive, interruptible)) \
+ return -EINTR;

/* unlocks the driver */
static inline void unlock_fdc(void)
@@ -1003,7 +1527,7 @@ static void empty(void)

static DECLARE_WORK(floppy_work, NULL);

-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
{
PREPARE_WORK(&floppy_work, (work_func_t)handler);
schedule_work(&floppy_work);
@@ -1027,9 +1551,8 @@ static void cancel_activity(void)
static void fd_watchdog(void)
{
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from watchdog\n");
- }
#endif

if (disk_change(current_drive)) {
@@ -1039,7 +1562,7 @@ static void fd_watchdog(void)
reset_fdc();
} else {
del_timer(&fd_timer);
- fd_timer.function = (timeout_fn) fd_watchdog;
+ fd_timer.function = (timeout_fn)fd_watchdog;
fd_timer.expires = jiffies + HZ / 10;
add_timer(&fd_timer);
}
@@ -1109,16 +1632,16 @@ static void setup_DMA(void)
if (raw_cmd->length == 0) {
int i;

- printk("zero dma transfer size:");
+ pr_info("zero dma transfer size:");
for (i = 0; i < raw_cmd->cmd_count; i++)
- printk("%x,", raw_cmd->cmd[i]);
- printk("\n");
+ pr_cont("%x,", raw_cmd->cmd[i]);
+ pr_cont("\n");
cont->done(0);
FDCS->reset = 1;
return;
}
if (((unsigned long)raw_cmd->kernel_data) % 512) {
- printk("non aligned address: %p\n", raw_cmd->kernel_data);
+ pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
cont->done(0);
FDCS->reset = 1;
return;
@@ -1176,10 +1699,11 @@ static int wait_til_ready(void)
/* sends a command byte to the fdc */
static int output_byte(char byte)
{
- int status;
+ int status = wait_til_ready();

- if ((status = wait_til_ready()) < 0)
+ if (status < 0)
return -1;
+
if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
fd_outb(byte, FD_DATA);
#ifdef FLOPPY_SANITY_CHECK
@@ -1199,16 +1723,15 @@ static int output_byte(char byte)
return -1;
}

-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
/* gets the response from the fdc */
static int result(void)
{
int i;
- int status = 0;
+ int status;

for (i = 0; i < MAX_REPLIES; i++) {
- if ((status = wait_til_ready()) < 0)
+ status = wait_til_ready();
+ if (status < 0)
break;
status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
if ((status & ~STATUS_BUSY) == STATUS_READY) {
@@ -1234,12 +1757,13 @@ static int result(void)
}

#define MORE_OUTPUT -2
+
/* does the fdc need more output? */
static int need_more_output(void)
{
- int status;
+ int status = wait_til_ready();

- if ((status = wait_til_ready()) < 0)
+ if (status < 0)
return -1;
if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
return MORE_OUTPUT;
@@ -1264,9 +1788,12 @@ static inline void perpendicular_mode(void)
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
- FDCS->reset = 1; /* convenient way to return to
- * redo without to much hassle (deep
- * stack et al. */
+ FDCS->reset = 1;
+ /*
+ * convenient way to return to
+ * redo without too much hassle
+ * (deep stack et al.)
+ */
return;
}
} else
@@ -1366,9 +1893,9 @@ static void fdc_specify(void)

/* Convert step rate from microseconds to milliseconds and 4 bits */
srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
- if (slow_floppy) {
+ if (slow_floppy)
srt = srt / 4;
- }
+
SUPBOUND(srt, 0xf);
INFBOUND(srt, 0);

@@ -1415,20 +1942,50 @@ static int fdc_dtr(void)
* Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
*/
FDCS->dtr = raw_cmd->rate & 3;
- return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
- (timeout_fn) floppy_ready));
+ return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+ (timeout_fn)floppy_ready);
} /* fdc_dtr */

static void tell_sector(void)
{
- printk(": track %d, head %d, sector %d, size %d",
- R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+ pr_cont(": track %d, head %d, sector %d, size %d",
+ R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
} /* tell_sector */

+static void print_errors(void)
+{
+ DPRINT("");
+ if (ST0 & ST0_ECE) {
+ pr_cont("Recalibrate failed!");
+ } else if (ST2 & ST2_CRC) {
+ pr_cont("data CRC error");
+ tell_sector();
+ } else if (ST1 & ST1_CRC) {
+ pr_cont("CRC error");
+ tell_sector();
+ } else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+ (ST2 & ST2_MAM)) {
+ if (!probing) {
+ pr_cont("sector not found");
+ tell_sector();
+ } else
+ pr_cont("probe failed...");
+ } else if (ST2 & ST2_WC) { /* seek error */
+ pr_cont("wrong cylinder");
+ } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
+ pr_cont("bad cylinder");
+ } else {
+ pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+ ST0, ST1, ST2);
+ tell_sector();
+ }
+ pr_cont("\n");
+}
+
/*
* OK, this error interpreting routine is called after a
- * DMA read/write has succeeded
- * or failed, so we check the results, and copy any buffers.
+ * DMA read/write has succeeded or failed, so we check the results,
+ * and copy any buffers.
* hhb: Added better error reporting.
* ak: Made this into a separate routine.
*/
@@ -1460,33 +2017,7 @@ static int interpret_errors(void)
DPRINT("Over/Underrun - retrying\n");
bad = 0;
} else if (*errors >= DP->max_errors.reporting) {
- DPRINT("");
- if (ST0 & ST0_ECE) {
- printk("Recalibrate failed!");
- } else if (ST2 & ST2_CRC) {
- printk("data CRC error");
- tell_sector();
- } else if (ST1 & ST1_CRC) {
- printk("CRC error");
- tell_sector();
- } else if ((ST1 & (ST1_MAM | ST1_ND))
- || (ST2 & ST2_MAM)) {
- if (!probing) {
- printk("sector not found");
- tell_sector();
- } else
- printk("probe failed...");
- } else if (ST2 & ST2_WC) { /* seek error */
- printk("wrong cylinder");
- } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
- printk("bad cylinder");
- } else {
- printk
- ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
- ST0, ST1, ST2);
- tell_sector();
- }
- printk("\n");
+ print_errors();
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
@@ -1531,9 +2062,9 @@ static void setup_rw_floppy(void)
*/
if (time_after(ready_date, jiffies + DP->select_delay)) {
ready_date -= DP->select_delay;
- function = (timeout_fn) floppy_start;
+ function = (timeout_fn)floppy_start;
} else
- function = (timeout_fn) setup_rw_floppy;
+ function = (timeout_fn)setup_rw_floppy;

/* wait until the floppy is spinning fast enough */
if (fd_wait_for_completion(ready_date, function))
@@ -1585,8 +2116,7 @@ static void seek_interrupt(void)
if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
#ifdef DCL_DEBUG
if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of effective seek\n");
+ DPRINT("clearing NEWCHANGE flag because of effective seek\n");
DPRINT("jiffies=%lu\n", jiffies);
}
#endif
@@ -1629,9 +2159,8 @@ static void seek_floppy(void)
blind_seek = 0;

#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from seek\n");
- }
#endif

if (!TESTF(FD_DISK_NEWCHANGE) &&
@@ -1677,7 +2206,10 @@ static void seek_floppy(void)
do_floppy = seek_interrupt;
output_byte(FD_SEEK);
output_byte(UNIT(current_drive));
- LAST_OUT(track);
+ if (output_byte(track) < 0) {
+ reset_fdc();
+ return;
+ }
debugt("seek command:");
}

@@ -1706,10 +2238,8 @@ static void recal_interrupt(void)
* be already at track 0.) Clear the
* new change flag */
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of second recalibrate\n");
- }
+ if (DP->flags & FD_DEBUG)
+ DPRINT("clearing NEWCHANGE flag because of second recalibrate\n");
#endif

CLEARF(FD_DISK_NEWCHANGE);
@@ -1738,8 +2268,8 @@ static void print_result(char *message, int inr)
DPRINT("%s ", message);
if (inr >= 0)
for (i = 0; i < inr; i++)
- printk("repl[%d]=%x ", i, reply_buffer[i]);
- printk("\n");
+ pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+ pr_cont("\n");
}

/* interrupt handler. Note that this can be called externally on the Sparc */
@@ -1760,9 +2290,9 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
do_floppy = NULL;
if (fdc >= N_FDC || FDCS->address == -1) {
/* we don't even know which FDC is the culprit */
- printk("DOR0=%x\n", fdc_state[0].dor);
- printk("floppy interrupt on bizarre fdc %d\n", fdc);
- printk("handler=%p\n", handler);
+ pr_info("DOR0=%x\n", fdc_state[0].dor);
+ pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+ pr_info("handler=%p\n", handler);
is_alive("bizarre fdc");
return IRQ_NONE;
}
@@ -1809,7 +2339,10 @@ static void recalibrate_floppy(void)
debugt("recalibrate floppy:");
do_floppy = recal_interrupt;
output_byte(FD_RECALIBRATE);
- LAST_OUT(UNIT(current_drive));
+ if (UNIT(current_drive) < 0) {
+ reset_fdc();
+ return;
+ }
}

/*
@@ -1820,7 +2353,7 @@ static void reset_interrupt(void)
debugt("reset interrupt:");
result(); /* get the status ready for set_fdc */
if (FDCS->reset) {
- printk("reset set in interrupt, calling %p\n", cont->error);
+ pr_info("reset set in interrupt, calling %p\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
}
cont->redo();
@@ -1858,46 +2391,44 @@ static void show_floppy(void)
{
int i;

- printk("\n");
- printk("floppy driver state\n");
- printk("-------------------\n");
- printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
- jiffies, interruptjiffies, jiffies - interruptjiffies,
- lasthandler);
+ pr_info("\n");
+ pr_info("floppy driver state\n");
+ pr_info("-------------------\n");
+ pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
+ jiffies, interruptjiffies, jiffies - interruptjiffies,
+ lasthandler);

#ifdef FLOPPY_SANITY_CHECK
- printk("timeout_message=%s\n", timeout_message);
- printk("last output bytes:\n");
+ pr_info("timeout_message=%s\n", timeout_message);
+ pr_info("last output bytes:\n");
for (i = 0; i < OLOGSIZE; i++)
- printk("%2x %2x %lu\n",
- output_log[(i + output_log_pos) % OLOGSIZE].data,
- output_log[(i + output_log_pos) % OLOGSIZE].status,
- output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
- printk("last result at %lu\n", resultjiffies);
- printk("last redo_fd_request at %lu\n", lastredo);
- for (i = 0; i < resultsize; i++) {
- printk("%2x ", reply_buffer[i]);
- }
- printk("\n");
+ pr_info("%2x %2x %lu\n",
+ output_log[(i + output_log_pos) % OLOGSIZE].data,
+ output_log[(i + output_log_pos) % OLOGSIZE].status,
+ output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+ pr_info("last result at %lu\n", resultjiffies);
+ pr_info("last redo_fd_request at %lu\n", lastredo);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+ reply_buffer, resultsize, true);
#endif

- printk("status=%x\n", fd_inb(FD_STATUS));
- printk("fdc_busy=%lu\n", fdc_busy);
+ pr_info("status=%x\n", fd_inb(FD_STATUS));
+ pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
- printk("do_floppy=%p\n", do_floppy);
+ pr_info("do_floppy=%p\n", do_floppy);
if (work_pending(&floppy_work))
- printk("floppy_work.func=%p\n", floppy_work.func);
+ pr_info("floppy_work.func=%p\n", floppy_work.func);
if (timer_pending(&fd_timer))
- printk("fd_timer.function=%p\n", fd_timer.function);
+ pr_info("fd_timer.function=%p\n", fd_timer.function);
if (timer_pending(&fd_timeout)) {
- printk("timer_function=%p\n", fd_timeout.function);
- printk("expires=%lu\n", fd_timeout.expires - jiffies);
- printk("now=%lu\n", jiffies);
- }
- printk("cont=%p\n", cont);
- printk("current_req=%p\n", current_req);
- printk("command_status=%d\n", command_status);
- printk("\n");
+ pr_info("timer_function=%p\n", fd_timeout.function);
+ pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+ pr_info("now=%lu\n", jiffies);
+ }
+ pr_info("cont=%p\n", cont);
+ pr_info("current_req=%p\n", current_req);
+ pr_info("command_status=%d\n", command_status);
+ pr_info("\n");
}

static void floppy_shutdown(unsigned long data)
@@ -1923,7 +2454,7 @@ static void floppy_shutdown(unsigned long data)
cont->done(0);
cont->redo(); /* this will recall reset when needed */
} else {
- printk("no cont in shutdown!\n");
+ pr_info("no cont in shutdown!\n");
process_fd_request();
}
is_alive("floppy shutdown");
@@ -1954,27 +2485,29 @@ static int start_motor(void (*function)(void))
set_dor(fdc, mask, data);

/* wait_for_completion also schedules reset if needed. */
- return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
- (timeout_fn) function));
+ return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+ (timeout_fn)function);
}

static void floppy_ready(void)
{
- CHECK_RESET;
+ if (FDCS->reset) {
+ reset_fdc();
+ return;
+ }
if (start_motor(floppy_ready))
return;
if (fdc_dtr())
return;

#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from floppy_ready\n");
- }
#endif
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !DP->select_delay)
- twaddle(); /* this clears the dcl on certain drive/controller
- * combinations */
+ twaddle(); /* this clears the dcl on certain
+ * drive/controller combinations */

#ifdef fd_chose_dma_mode
if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
@@ -2002,9 +2535,8 @@ static void floppy_start(void)

scandrives();
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("setting NEWCHANGE in floppy_start\n");
- }
#endif
SETF(FD_DISK_NEWCHANGE);
floppy_ready();
@@ -2181,8 +2713,9 @@ static void format_interrupt(void)
}

#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
#define CT(x) ((x) | 0xc0)
+
static void setup_format_params(int track)
{
int n;
@@ -2197,8 +2730,8 @@ static void setup_format_params(int track)
raw_cmd = &default_raw_cmd;
raw_cmd->track = track;

- raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
- FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+ raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+ FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
raw_cmd->rate = _floppy->rate & 0x43;
raw_cmd->cmd_count = NR_F;
COMMAND = FM_MODE(_floppy, FD_FORMAT);
@@ -2325,7 +2858,7 @@ static void request_done(int uptodate)
reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);

if (!req) {
- printk("floppy.c: no request in request_done\n");
+ pr_info("floppy.c: no request in request_done\n");
return;
}

@@ -2398,13 +2931,13 @@ static void rw_interrupt(void)
DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
DPRINT("long rw: %x instead of %lx\n",
nr_sectors, current_count_sectors);
- printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
- printk("rh=%d h=%d\n", R_HEAD, HEAD);
- printk("rt=%d t=%d\n", R_TRACK, TRACK);
- printk("heads=%d eoc=%d\n", heads, eoc);
- printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
- fsector_t, ssize);
- printk("in_sector_offset=%d\n", in_sector_offset);
+ pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+ pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+ pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+ pr_info("heads=%d eoc=%d\n", heads, eoc);
+ pr_info("spt=%d st=%d ss=%d\n",
+ SECT_PER_TRACK, fsector_t, ssize);
+ pr_info("in_sector_offset=%d\n", in_sector_offset);
}
#endif

@@ -2514,14 +3047,14 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
#ifdef FLOPPY_SANITY_CHECK
if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
- printk("current_count_sectors=%ld\n", current_count_sectors);
- printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%u\n",
- blk_rq_sectors(current_req));
- printk("current_req->current_nr_sectors=%u\n",
- blk_rq_cur_sectors(current_req));
- printk("max_sector=%d\n", max_sector);
- printk("ssize=%d\n", ssize);
+ pr_info("current_count_sectors=%ld\n", current_count_sectors);
+ pr_info("remaining=%d\n", remaining >> 9);
+ pr_info("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
+ pr_info("current_req->current_nr_sectors=%u\n",
+ blk_rq_cur_sectors(current_req));
+ pr_info("max_sector=%d\n", max_sector);
+ pr_info("ssize=%d\n", ssize);
}
#endif

@@ -2544,16 +3077,15 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
floppy_track_buffer + (max_buffer_sectors << 10) ||
dma_buffer < floppy_track_buffer) {
DPRINT("buffer overrun in copy buffer %d\n",
- (int)((floppy_track_buffer -
- dma_buffer) >> 9));
- printk("fsector_t=%d buffer_min=%d\n",
- fsector_t, buffer_min);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ (int)((floppy_track_buffer - dma_buffer) >> 9));
+ pr_info("fsector_t=%d buffer_min=%d\n",
+ fsector_t, buffer_min);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
break;
}
if (((unsigned long)buffer) % 512)
@@ -2595,13 +3127,14 @@ static void virtualdmabug_workaround(void)
end_sector = SECTOR + hard_sectors - 1;
#ifdef FLOPPY_SANITY_CHECK
if (end_sector > SECT_PER_TRACK) {
- printk("too many sectors %d > %d\n",
- end_sector, SECT_PER_TRACK);
+ pr_info("too many sectors %d > %d\n",
+ end_sector, SECT_PER_TRACK);
return;
}
#endif
- SECT_PER_TRACK = end_sector; /* make sure SECT_PER_TRACK points
- * to end of transfer */
+ SECT_PER_TRACK = end_sector;
+ /* make sure SECT_PER_TRACK
+ * points to end of transfer */
}
}

@@ -2624,7 +3157,7 @@ static int make_raw_rw_request(void)
int ssize;

if (max_buffer_sectors == 0) {
- printk("VFS: Block I/O scheduled on unopened device\n");
+ pr_info("VFS: Block I/O scheduled on unopened device\n");
return 0;
}

@@ -2731,7 +3264,8 @@ static int make_raw_rw_request(void)
} else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
if (fsector_t + blk_rq_sectors(current_req) > ssize &&
- fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
+ fsector_t + blk_rq_sectors(current_req) <
+ ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
@@ -2755,9 +3289,8 @@ static int make_raw_rw_request(void)
dma_limit =
(MAX_DMA_ADDRESS -
((unsigned long)current_req->buffer)) >> 9;
- if ((unsigned long)max_size > dma_limit) {
+ if ((unsigned long)max_size > dma_limit)
max_size = dma_limit;
- }
/* 64 kb boundaries */
if (CROSS_64KB(current_req->buffer, max_size << 9))
max_size = (K_64 -
@@ -2773,15 +3306,15 @@ static int make_raw_rw_request(void)
*/
if (!direct ||
(indirect * 2 > direct * 3 &&
- *errors < DP->max_errors.read_track && ((!probing
- || (DP->read_track & (1 << DRS->probed_format)))))) {
+ *errors < DP->max_errors.read_track &&
+ ((!probing ||
+ (DP->read_track & (1 << DRS->probed_format)))))) {
max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
if (raw_cmd->length == 0) {
- DPRINT
- ("zero dma transfer attempted from make_raw_request\n");
+ DPRINT("zero dma transfer attempted from make_raw_request\n");
DPRINT("indirect=%d direct=%d fsector_t=%d",
indirect, direct, fsector_t);
return 0;
@@ -2802,15 +3335,14 @@ static int make_raw_rw_request(void)
((CT(COMMAND) == FD_READ ||
(!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
- max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
- /* not enough space */
- ) {
+ max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+ /* not enough space */
buffer_track = -1;
buffer_drive = current_drive;
buffer_max = buffer_min = aligned_sector_t;
}
raw_cmd->kernel_data = floppy_track_buffer +
- ((aligned_sector_t - buffer_min) << 9);
+ ((aligned_sector_t - buffer_min) << 9);

if (CT(COMMAND) == FD_WRITE) {
/* copy write buffer to track buffer.
@@ -2845,19 +3377,19 @@ static int make_raw_rw_request(void)
DPRINT("fractionary current count b=%lx s=%lx\n",
raw_cmd->length, current_count_sectors);
if (raw_cmd->kernel_data != current_req->buffer)
- printk("addr=%d, length=%ld\n",
- (int)((raw_cmd->kernel_data -
- floppy_track_buffer) >> 9),
- current_count_sectors);
- printk("st=%d ast=%d mse=%d msi=%d\n",
- fsector_t, aligned_sector_t, max_sector, max_size);
- printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
- printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
- COMMAND, SECTOR, HEAD, TRACK);
- printk("buffer drive=%d\n", buffer_drive);
- printk("buffer track=%d\n", buffer_track);
- printk("buffer_min=%d\n", buffer_min);
- printk("buffer_max=%d\n", buffer_max);
+ pr_info("addr=%d, length=%ld\n",
+ (int)((raw_cmd->kernel_data -
+ floppy_track_buffer) >> 9),
+ current_count_sectors);
+ pr_info("st=%d ast=%d mse=%d msi=%d\n",
+ fsector_t, aligned_sector_t, max_sector, max_size);
+ pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+ pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+ COMMAND, SECTOR, HEAD, TRACK);
+ pr_info("buffer drive=%d\n", buffer_drive);
+ pr_info("buffer track=%d\n", buffer_track);
+ pr_info("buffer_min=%d\n", buffer_min);
+ pr_info("buffer_max=%d\n", buffer_max);
return 0;
}

@@ -2868,14 +3400,14 @@ static int make_raw_rw_request(void)
raw_cmd->kernel_data + raw_cmd->length >
floppy_track_buffer + (max_buffer_sectors << 10)) {
DPRINT("buffer overrun in schedule dma\n");
- printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
- fsector_t, buffer_min, raw_cmd->length >> 9);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+ fsector_t, buffer_min, raw_cmd->length >> 9);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
return 0;
}
} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
@@ -2884,8 +3416,8 @@ static int make_raw_rw_request(void)
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
DPRINT("more sectors than bytes\n");
- printk("bytes=%ld\n", raw_cmd->length >> 9);
- printk("sectors=%ld\n", current_count_sectors);
+ pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+ pr_info("sectors=%ld\n", current_count_sectors);
}
if (raw_cmd->length == 0) {
DPRINT("zero dma transfer attempted from make_raw_request\n");
@@ -2979,19 +3511,19 @@ static void process_fd_request(void)
schedule_bh(redo_fd_request);
}

-static void do_fd_request(struct request_queue * q)
+static void do_fd_request(struct request_queue *q)
{
if (max_buffer_sectors == 0) {
- printk("VFS: do_fd_request called on non-open device\n");
+ pr_info("VFS: do_fd_request called on non-open device\n");
return;
}

if (usage_count == 0) {
- printk("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- printk("sect=%ld type=%x flags=%x\n",
- (long)blk_rq_pos(current_req), current_req->cmd_type,
- current_req->cmd_flags);
+ pr_info("warning: usage count=0, current_req=%p exiting\n",
+ current_req);
+ pr_info("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
@@ -3023,9 +3555,8 @@ static int poll_drive(int interruptible, int flag)
raw_cmd->cmd_count = 0;
cont = &poll_cont;
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("setting NEWCHANGE in poll_drive\n");
- }
#endif
SETF(FD_DISK_NEWCHANGE);
WAIT(floppy_ready);
@@ -3039,7 +3570,7 @@ static int poll_drive(int interruptible, int flag)

static void reset_intr(void)
{
- printk("weird, reset interrupt called\n");
+ pr_info("weird, reset interrupt called\n");
}

static struct cont_t reset_cont = {
@@ -3075,16 +3606,19 @@ static inline int fd_copyout(void __user *param, const void *address,
return copy_to_user(param, address, size) ? -EFAULT : 0;
}

-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+ unsigned long size)
{
return copy_from_user(address, param, size) ? -EFAULT : 0;
}

-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
+#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) \
+ ? -EFAULT : 0)
+#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) \
+ ? -EFAULT : 0)

-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
+#define COPYOUT(x) ECALL(_COPYOUT(x))
+#define COPYIN(x) ECALL(_COPYIN(x))

static inline const char *drive_name(int type, int drive)
{
@@ -3165,11 +3699,12 @@ static inline int raw_cmd_copyout(int cmd, char __user *param,
COPYOUT(*ptr);
param += sizeof(struct floppy_raw_cmd);
if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
- if (ptr->length >= 0
- && ptr->length <= ptr->buffer_length)
- ECALL(fd_copyout
- (ptr->data, ptr->kernel_data,
- ptr->buffer_length - ptr->length));
+ if (ptr->length >= 0 &&
+ ptr->length <= ptr->buffer_length) {
+ long length = ptr->buffer_length - ptr->length;
+ ECALL(fd_copyout(ptr->data, ptr->kernel_data,
+ length));
+ }
}
ptr = ptr->next;
}
@@ -3204,8 +3739,7 @@ static inline int raw_cmd_copyin(int cmd, char __user *param,

*rcmd = NULL;
while (1) {
- ptr = (struct floppy_raw_cmd *)
- kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
+ ptr = kmalloc(sizeof(struct floppy_raw_cmd), GFP_USER);
if (!ptr)
return -ENOMEM;
*rcmd = ptr;
@@ -3285,9 +3819,8 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
cont = &raw_cmd_cont;
ret = wait_til_done(floppy_start, 1);
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from raw_cmd ioctl\n");
- }
#endif

if (ret != -EINTR && FDCS->reset)
@@ -3415,7 +3948,7 @@ static inline int normalize_ioctl(int *cmd, int *size)
*size = _IOC_SIZE(*cmd);
*cmd = ioctl_table[i];
if (*size > _IOC_SIZE(*cmd)) {
- printk("ioctl not yet supported\n");
+ pr_info("ioctl not yet supported\n");
return -EFAULT;
}
return 0;
@@ -3459,9 +3992,7 @@ static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
unsigned long param)
{
-#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
-#define OUT(c,x) case c: outparam = (const char *) (x); break
-#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
+#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE | FMODE_WRITE_IOCTL))

int drive = (long)bdev->bd_disk->private_data;
int type = ITYPE(UDRS->fd_device);
@@ -3479,143 +4010,163 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
/* convert compatibility eject ioctls into floppy eject ioctl.
* We do this in order to provide a means to eject floppy disks before
* installing the new fdutils package */
- if (cmd == CDROMEJECT || /* CD-ROM eject */
- cmd == 0x6470 /* SunOS floppy eject */ ) {
+ if (cmd == CDROMEJECT || cmd == 0x6470) {
DPRINT("obsolete eject ioctl\n");
DPRINT("please use floppycontrol --eject\n");
cmd = FDEJECT;
}

- /* convert the old style command into a new style command */
- if ((cmd & 0xff00) == 0x0200) {
- ECALL(normalize_ioctl(&cmd, &size));
- } else
+ if ((cmd & 0xff00) != 0x0200)
return -EINVAL;

+ /* convert the old style command into a new style command */
+ ECALL(normalize_ioctl(&cmd, &size));
+
/* permission checks */
if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
return -EPERM;

/* copyin */
- CLEARSTRUCT(&inparam);
+ memset(&inparam, 0, sizeof(inparam));
if (_IOC_DIR(cmd) & _IOC_WRITE)
- ECALL(fd_copyin((void __user *)param, &inparam, size))
+ ECALL(fd_copyin((void __user *)param, &inparam, size));

- switch (cmd) {
- case FDEJECT:
- if (UDRS->fd_ref != 1)
- /* somebody else has this drive open */
- return -EBUSY;
- LOCK_FDC(drive, 1);
+ switch (cmd) {
+ case FDEJECT:
+ if (UDRS->fd_ref != 1)
+ /* somebody else has this drive open */
+ return -EBUSY;
+ LOCK_FDC(drive, 1);

- /* do the actual eject. Fails on
- * non-Sparc architectures */
- ret = fd_eject(UNIT(drive));
+ /* do the actual eject. Fails on
+ * non-Sparc architectures */
+ ret = fd_eject(UNIT(drive));

- USETF(FD_DISK_CHANGED);
- USETF(FD_VERIFY);
- process_fd_request();
- return ret;
- case FDCLRPRM:
- LOCK_FDC(drive, 1);
- current_type[drive] = NULL;
- floppy_sizes[drive] = MAX_DISK_SIZE << 1;
- UDRS->keep_data = 0;
- return invalidate_drive(bdev);
- case FDSETPRM:
- case FDDEFPRM:
- return set_geometry(cmd, &inparam.g,
- drive, type, bdev);
- case FDGETPRM:
- ECALL(get_floppy_geometry(drive, type,
- (struct floppy_struct **)
- &outparam));
- break;
+ USETF(FD_DISK_CHANGED);
+ USETF(FD_VERIFY);
+ process_fd_request();
+ return ret;

- case FDMSGON:
- UDP->flags |= FTD_MSG;
- return 0;
- case FDMSGOFF:
- UDP->flags &= ~FTD_MSG;
- return 0;
+ case FDCLRPRM:
+ LOCK_FDC(drive, 1);
+ current_type[drive] = NULL;
+ floppy_sizes[drive] = MAX_DISK_SIZE << 1;
+ UDRS->keep_data = 0;
+ return invalidate_drive(bdev);
+
+ case FDSETPRM:
+ case FDDEFPRM:
+ return set_geometry(cmd, &inparam.g, drive, type, bdev);
+
+ case FDGETPRM:
+ ECALL(get_floppy_geometry(drive, type,
+ (struct floppy_struct **)
+ &outparam));
+ break;

- case FDFMTBEG:
- LOCK_FDC(drive, 1);
- CALL(poll_drive(1, FD_RAW_NEED_DISK));
- ret = UDRS->flags;
- process_fd_request();
- if (ret & FD_VERIFY)
- return -ENODEV;
- if (!(ret & FD_DISK_WRITABLE))
- return -EROFS;
- return 0;
- case FDFMTTRK:
- if (UDRS->fd_ref != 1)
- return -EBUSY;
- return do_format(drive, &inparam.f);
- case FDFMTEND:
- case FDFLUSH:
- LOCK_FDC(drive, 1);
- return invalidate_drive(bdev);
-
- case FDSETEMSGTRESH:
- UDP->max_errors.reporting =
- (unsigned short)(param & 0x0f);
- return 0;
- OUT(FDGETMAXERRS, &UDP->max_errors);
- IN(FDSETMAXERRS, &UDP->max_errors, max_errors);
+ case FDMSGON:
+ UDP->flags |= FTD_MSG;
+ return 0;

- case FDGETDRVTYP:
- outparam = drive_name(type, drive);
- SUPBOUND(size, strlen(outparam) + 1);
- break;
+ case FDMSGOFF:
+ UDP->flags &= ~FTD_MSG;
+ return 0;

- IN(FDSETDRVPRM, UDP, dp);
- OUT(FDGETDRVPRM, UDP);
+ case FDFMTBEG:
+ LOCK_FDC(drive, 1);
+ CALL(poll_drive(1, FD_RAW_NEED_DISK));
+ ret = UDRS->flags;
+ process_fd_request();
+ if (ret & FD_VERIFY)
+ return -ENODEV;
+ if (!(ret & FD_DISK_WRITABLE))
+ return -EROFS;
+ return 0;

- case FDPOLLDRVSTAT:
- LOCK_FDC(drive, 1);
- CALL(poll_drive(1, FD_RAW_NEED_DISK));
- process_fd_request();
- /* fall through */
- OUT(FDGETDRVSTAT, UDRS);
+ case FDFMTTRK:
+ if (UDRS->fd_ref != 1)
+ return -EBUSY;
+ return do_format(drive, &inparam.f);

- case FDRESET:
- return user_reset_fdc(drive, (int)param, 1);
+ case FDFMTEND:
+ case FDFLUSH:
+ LOCK_FDC(drive, 1);
+ return invalidate_drive(bdev);

- OUT(FDGETFDCSTAT, UFDCS);
+ case FDSETEMSGTRESH:
+ UDP->max_errors.reporting = (unsigned short)(param & 0x0f);
+ return 0;

- case FDWERRORCLR:
- CLEARSTRUCT(UDRWE);
- return 0;
- OUT(FDWERRORGET, UDRWE);
+ case FDGETMAXERRS:
+ outparam = (const char *)&UDP->max_errors;
+ break;

- case FDRAWCMD:
- if (type)
- return -EINVAL;
- LOCK_FDC(drive, 1);
- set_floppy(drive);
- CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
- process_fd_request();
- return i;
+ case FDSETMAXERRS:
+ UDP->max_errors = inparam.max_errors;
+ return 0;

- case FDTWADDLE:
- LOCK_FDC(drive, 1);
- twaddle();
- process_fd_request();
- return 0;
+ case FDGETDRVTYP:
+ outparam = drive_name(type, drive);
+ SUPBOUND(size, strlen(outparam) + 1);
+ break;

- default:
+ case FDSETDRVPRM:
+ *UDP = inparam.dp;
+ return 0;
+
+ case FDGETDRVPRM:
+ outparam = (const char *)UDP;
+ break;
+
+ case FDPOLLDRVSTAT:
+ LOCK_FDC(drive, 1);
+ CALL(poll_drive(1, FD_RAW_NEED_DISK));
+ process_fd_request();
+ /* fall through */
+
+ case FDGETDRVSTAT:
+ outparam = (const char *)UDRS;
+ break;
+
+ case FDRESET:
+ return user_reset_fdc(drive, (int)param, 1);
+
+ case FDGETFDCSTAT:
+ outparam = (const char *)UFDCS;
+ break;
+
+ case FDWERRORCLR:
+ memset(UDRWE, 0, sizeof(*UDRWE));
+ return 0;
+
+ case FDWERRORGET:
+ outparam = (const char *)UDRWE;
+ break;
+
+ case FDRAWCMD:
+ if (type)
return -EINVAL;
- }
+ LOCK_FDC(drive, 1);
+ set_floppy(drive);
+ CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
+ process_fd_request();
+ return i;
+
+ case FDTWADDLE:
+ LOCK_FDC(drive, 1);
+ twaddle();
+ process_fd_request();
+ return 0;
+
+ default:
+ return -EINVAL;
+ }

if (_IOC_DIR(cmd) & _IOC_READ)
return fd_copyout((void __user *)param, outparam, size);
else
return 0;
-#undef OUT
-#undef IN
}

static void __init config_types(void)
@@ -3654,15 +4205,16 @@ static void __init config_types(void)
if (name) {
const char *prepend = ",";
if (first) {
- prepend = KERN_INFO "Floppy drive(s):";
+ pr_info("Floppy drive(s):");
+ prepend = "";
first = 0;
}
- printk("%s fd%d is %s", prepend, drive, name);
+ pr_cont("%s fd%d is %s", prepend, drive, name);
}
*UDP = *params;
}
if (!first)
- printk("\n");
+ pr_cont("\n");
}

static int floppy_release(struct gendisk *disk, fmode_t mode)
@@ -3732,9 +4284,8 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
INFBOUND(try, 16);
tmp = (char *)fd_dma_mem_alloc(1024 * try);
}
- if (!tmp && !floppy_track_buffer) {
+ if (!tmp && !floppy_track_buffer)
fallback_on_nodma_alloc(&tmp, 2048 * try);
- }
if (!tmp && !floppy_track_buffer) {
DPRINT("Unable to allocate DMA memory\n");
goto out;
@@ -3761,7 +4312,7 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
UFDCS->rawcmd = 2;

if (!(mode & FMODE_NDELAY)) {
- if (mode & (FMODE_READ|FMODE_WRITE)) {
+ if (mode & (FMODE_READ | FMODE_WRITE)) {
UDRS->last_checked = 0;
check_disk_change(bdev);
if (UTESTF(FD_DISK_CHANGED))
@@ -3815,8 +4366,7 @@ static int check_floppy_change(struct gendisk *disk)
* a disk in the drive, and whether that disk is writable.
*/

-static void floppy_rb0_complete(struct bio *bio,
- int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
{
complete((struct completion *)bio->bi_private);
}
@@ -3877,13 +4427,14 @@ static int floppy_revalidate(struct gendisk *disk)
if (UTESTF(FD_DISK_CHANGED) ||
UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
if (usage_count == 0) {
- printk("VFS: revalidate called on non-open device.\n");
+ pr_info("VFS: revalidate called on non-open device.\n");
return -EFAULT;
}
lock_fdc(drive, 0);
cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY);
if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) {
- process_fd_request(); /*already done by another thread */
+ process_fd_request();
+ /*already done by another thread */
return 0;
}
UDRS->maxblock = 0;
@@ -3908,13 +4459,13 @@ static int floppy_revalidate(struct gendisk *disk)
}

static const struct block_device_operations floppy_fops = {
- .owner = THIS_MODULE,
- .open = floppy_open,
- .release = floppy_release,
- .locked_ioctl = fd_ioctl,
- .getgeo = fd_getgeo,
- .media_changed = check_floppy_change,
- .revalidate_disk = floppy_revalidate,
+ .owner = THIS_MODULE,
+ .open = floppy_open,
+ .release = floppy_release,
+ .locked_ioctl = fd_ioctl,
+ .getgeo = fd_getgeo,
+ .media_changed = check_floppy_change,
+ .revalidate_disk = floppy_revalidate,
};

/*
@@ -3931,21 +4482,21 @@ static char __init get_fdc_version(void)
output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */
if (FDCS->reset)
return FDC_NONE;
- if ((r = result()) <= 0x00)
+ r = result();
+ if (r <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+ pr_info("FDC %d is an 8272A\n", fdc);
return FDC_8272A; /* 8272a/765 don't know DUMPREGS */
}
if (r != 10) {
- printk
- ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}

if (!fdc_configure()) {
- printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+ pr_info("FDC %d is an 82072\n", fdc);
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}

@@ -3953,52 +4504,51 @@ static char __init get_fdc_version(void)
if (need_more_output() == MORE_OUTPUT) {
output_byte(0);
} else {
- printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+ pr_info("FDC %d is an 82072A\n", fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}

output_byte(FD_UNLOCK);
r = result();
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
- return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
- * LOCK/UNLOCK */
+ pr_info("FDC %d is a pre-1991 82077\n", fdc);
+ return FDC_82077_ORIG; /* Pre-1991 82077,
+ doesn't know LOCK/UNLOCK */
}
if ((r != 1) || (reply_buffer[0] != 0x00)) {
- printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
output_byte(FD_PARTID);
r = result();
if (r != 1) {
- printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (reply_buffer[0] == 0x80) {
- printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
- return FDC_82077; /* Revised 82077AA passes all the tests */
+ pr_info("FDC %d is a post-1991 82077\n", fdc);
+ return FDC_82077;
+ /* Revised 82077AA passes all the tests */
}
switch (reply_buffer[0] >> 5) {
case 0x0:
/* Either a 82078-1 or a 82078SL running at 5Volt */
- printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+ pr_info("FDC %d is an 82078.\n", fdc);
return FDC_82078;
case 0x1:
- printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+ pr_info("FDC %d is a 44pin 82078\n", fdc);
return FDC_82078;
case 0x2:
- printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+ pr_info("FDC %d is a S82078B\n", fdc);
return FDC_S82078B;
case 0x3:
- printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
- fdc);
+ pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
return FDC_87306;
default:
- printk(KERN_INFO
- "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
- fdc, reply_buffer[0] >> 5);
+ pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+ fdc, reply_buffer[0] >> 5);
return FDC_82078_UNKN;
}
} /* get_fdc_version */
@@ -4060,37 +4610,181 @@ static void __init set_cmos(int *ints, int dummy, int dummy2)

static struct param_table {
const char *name;
- void (*fn) (int *ints, int param, int param2);
+ void (*fn)(int *ints, int param, int param2);
int *var;
int def_param;
int param2;
} config_params[] __initdata = {
- {"allowed_drive_mask", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */
- {"all_drives", NULL, &allowed_drive_mask, 0xff, 0}, /* obsolete */
- {"asus_pci", NULL, &allowed_drive_mask, 0x33, 0},
- {"irq", NULL, &FLOPPY_IRQ, 6, 0},
- {"dma", NULL, &FLOPPY_DMA, 2, 0},
- {"daring", daring, NULL, 1, 0},
+ {
+ .name = "allowed_drive_mask",
+ .fn = NULL,
+ .var = &allowed_drive_mask,
+ .def_param = 0xff,
+ .param2 = 0,
+ }, /* obsolete */
+ {
+ .name = "all_drives",
+ .fn = NULL,
+ .var = &allowed_drive_mask,
+ .def_param = 0xff,
+ .param2 = 0,
+ }, /* obsolete */
+ {
+ .name = "asus_pci",
+ .fn = NULL,
+ .var = &allowed_drive_mask,
+ .def_param = 0x33,
+ .param2 = 0,
+ },
+ {
+ .name = "irq",
+ .fn = NULL,
+ .var = &FLOPPY_IRQ,
+ .def_param = 6,
+ .param2 = 0,
+ },
+ {
+ .name = "dma",
+ .fn = NULL,
+ .var = &FLOPPY_DMA,
+ .def_param = 2,
+ .param2 = 0,
+ },
+ {
+ .name = "daring",
+ .fn = daring,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = 0,
+ },
#if N_FDC > 1
- {"two_fdc", NULL, &FDC2, 0x370, 0},
- {"one_fdc", NULL, &FDC2, 0, 0},
+ {
+ .name = "two_fdc",
+ .fn = NULL,
+ .var = &FDC2,
+ .def_param = 0x370,
+ .param2 = 0,
+ },
+ {
+ .name = "one_fdc",
+ .fn = NULL,
+ .var = &FDC2,
+ .def_param = 0,
+ .param2 = 0,
+ },
#endif
- {"thinkpad", floppy_set_flags, NULL, 1, FD_INVERTED_DCL},
- {"broken_dcl", floppy_set_flags, NULL, 1, FD_BROKEN_DCL},
- {"messages", floppy_set_flags, NULL, 1, FTD_MSG},
- {"silent_dcl_clear", floppy_set_flags, NULL, 1, FD_SILENT_DCL_CLEAR},
- {"debug", floppy_set_flags, NULL, 1, FD_DEBUG},
- {"nodma", NULL, &can_use_virtual_dma, 1, 0},
- {"omnibook", NULL, &can_use_virtual_dma, 1, 0},
- {"yesdma", NULL, &can_use_virtual_dma, 0, 0},
- {"fifo_depth", NULL, &fifo_depth, 0xa, 0},
- {"nofifo", NULL, &no_fifo, 0x20, 0},
- {"usefifo", NULL, &no_fifo, 0, 0},
- {"cmos", set_cmos, NULL, 0, 0},
- {"slow", NULL, &slow_floppy, 1, 0},
- {"unexpected_interrupts", NULL, &print_unex, 1, 0},
- {"no_unexpected_interrupts", NULL, &print_unex, 0, 0},
- {"L40SX", NULL, &print_unex, 0, 0}
+ {
+ .name = "thinkpad",
+ .fn = floppy_set_flags,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = FD_INVERTED_DCL
+ },
+ {
+ .name = "broken_dcl",
+ .fn = floppy_set_flags,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = FD_BROKEN_DCL
+ },
+ {
+ .name = "messages",
+ .fn = floppy_set_flags,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = FTD_MSG
+ },
+ {
+ .name = "silent_dcl_clear",
+ .fn = floppy_set_flags,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = FD_SILENT_DCL_CLEAR
+ },
+ {
+ .name = "debug",
+ .fn = floppy_set_flags,
+ .var = NULL,
+ .def_param = 1,
+ .param2 = FD_DEBUG
+ },
+ {
+ .name = "nodma",
+ .fn = NULL,
+ .var = &can_use_virtual_dma,
+ .def_param = 1,
+ .param2 = 0,
+ },
+ {
+ .name = "omnibook",
+ .fn = NULL,
+ .var = &can_use_virtual_dma,
+ .def_param = 1,
+ .param2 = 0,
+ },
+ {
+ .name = "yesdma",
+ .fn = NULL,
+ .var = &can_use_virtual_dma,
+ .def_param = 0,
+ .param2 = 0,
+ },
+ {
+ .name = "fifo_depth",
+ .fn = NULL,
+ .var = &fifo_depth,
+ .def_param = 0xa,
+ .param2 = 0,
+ },
+ {
+ .name = "nofifo",
+ .fn = NULL,
+ .var = &no_fifo,
+ .def_param = 0x20,
+ .param2 = 0,
+ },
+ {
+ .name = "usefifo",
+ .fn = NULL,
+ .var = &no_fifo,
+ .def_param = 0,
+ .param2 = 0,
+ },
+ {
+ .name = "cmos",
+ .fn = set_cmos,
+ .var = NULL,
+ .def_param = 0,
+ .param2 = 0,
+ },
+ {
+ .name = "slow",
+ .fn = NULL,
+ .var = &slow_floppy,
+ .def_param = 1,
+ .param2 = 0,
+ },
+ {
+ .name = "unexpected_interrupts",
+ .fn = NULL,
+ .var = &print_unex,
+ .def_param = 1,
+ .param2 = 0,
+ },
+ {
+ .name = "no_unexpected_interrupts",
+ .fn = NULL,
+ .var = &print_unex,
+ .def_param = 0,
+ .param2 = 0,
+ },
+ {
+ .name = "L40SX",
+ .fn = NULL,
+ .var = &print_unex,
+ .def_param = 0,
+ .param2 = 0,
+ }

EXTRA_FLOPPY_PARAMS
};
@@ -4110,9 +4804,9 @@ static int __init floppy_setup(char *str)
else
param = config_params[i].def_param;
if (config_params[i].fn)
- config_params[i].
- fn(ints, param,
- config_params[i].param2);
+ config_params[i].fn(ints, param,
+ config_params[i].
+ param2);
if (config_params[i].var) {
DPRINT("%s=%d\n", str, param);
*config_params[i].var = param;
@@ -4126,8 +4820,8 @@ static int __init floppy_setup(char *str)

DPRINT("allowed options are:");
for (i = 0; i < ARRAY_SIZE(config_params); i++)
- printk(" %s", config_params[i].name);
- printk("\n");
+ pr_cont(" %s", config_params[i].name);
+ pr_cont("\n");
} else
DPRINT("botched floppy option\n");
DPRINT("Read Documentation/blockdev/floppy.txt\n");
@@ -4145,7 +4839,8 @@ static ssize_t floppy_cmos_show(struct device *dev,
drive = p->id;
return sprintf(buf, "%X\n", UDP->cmos);
}
-DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);

static void floppy_device_release(struct device *dev)
{
@@ -4169,9 +4864,9 @@ static struct dev_pm_ops floppy_pm_ops = {

static struct platform_driver floppy_driver = {
.driver = {
- .name = "floppy",
- .pm = &floppy_pm_ops,
- },
+ .name = "floppy",
+ .pm = &floppy_pm_ops,
+ },
};

static struct platform_device floppy_device[N_DRIVE];
@@ -4247,11 +4942,11 @@ static int __init floppy_init(void)

for (i = 0; i < N_FDC; i++) {
fdc = i;
- CLEARSTRUCT(FDCS);
+ memset(FDCS, 0, sizeof(*FDCS));
FDCS->dtr = -1;
FDCS->dor = 0x4;
#if defined(__sparc__) || defined(__mc68000__)
- /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+ /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
#ifdef __mc68000__
if (MACH_IS_SUN3X)
#endif
@@ -4280,8 +4975,8 @@ static int __init floppy_init(void)

/* initialise drive state */
for (drive = 0; drive < N_DRIVE; drive++) {
- CLEARSTRUCT(UDRS);
- CLEARSTRUCT(UDRWE);
+ memset(UDRS, 0, sizeof(*UDRS));
+ memset(UDRWE, 0, sizeof(*UDRWE));
USETF(FD_DISK_NEWCHANGE);
USETF(FD_DISK_CHANGED);
USETF(FD_VERIFY);
@@ -4353,7 +5048,9 @@ static int __init floppy_init(void)
if (err)
goto out_flush_work;

- err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
+ err =
+ device_create_file(&floppy_device[drive].dev,
+ &dev_attr_cmos);
if (err)
goto out_unreg_platform_dev;

@@ -4394,12 +5091,12 @@ static const struct io_region {
int offset;
int size;
} io_regions[] = {
- { 2, 1 },
- /* address + 3 is sometimes reserved by pnp bios for motherboard */
- { 4, 2 },
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
- { 7, 1 },
+ { .offset = 2, .size = 1},
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { .offset = 4, .size = 2},
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { .offset = 7, .size = 1},
};

static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
@@ -4417,8 +5114,10 @@ static int floppy_request_regions(int fdc)
const struct io_region *p;

for (p = io_regions; p < ARRAY_END(io_regions); p++) {
- if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ if (!request_region
+ (FDCS->address + p->offset, p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n",
+ FDCS->address + p->offset);
floppy_release_allocated_regions(fdc, p);
return -EBUSY;
}
@@ -4548,15 +5247,15 @@ static void floppy_release_irq_and_dma(void)
#ifndef __sparc__
for (drive = 0; drive < N_FDC * 4; drive++)
if (timer_pending(motor_off_timer + drive))
- printk("motor off timer %d still active\n", drive);
+ pr_info("motor off timer %d still active\n", drive);
#endif

if (timer_pending(&fd_timeout))
- printk("floppy timer still active:%s\n", timeout_message);
+ pr_info("floppy timer still active:%s\n", timeout_message);
if (timer_pending(&fd_timer))
- printk("auxiliary floppy timer still active\n");
+ pr_info("auxiliary floppy timer still active\n");
if (work_pending(&floppy_work))
- printk("work still pending\n");
+ pr_info("work still pending\n");
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
@@ -4574,7 +5273,9 @@ static void __init parse_floppy_cfg_string(char *cfg)
char *ptr;

while (*cfg) {
- for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+ ptr = cfg;
+ while (*cfg && *cfg != ' ' && *cfg != '\t')
+ cfg++;
if (*cfg) {
*cfg = '\0';
cfg++;
@@ -4590,6 +5291,7 @@ static int __init floppy_module_init(void)
parse_floppy_cfg_string(floppy);
return floppy_init();
}
+
module_init(floppy_module_init);

static void __exit floppy_module_exit(void)
@@ -4606,7 +5308,8 @@ static void __exit floppy_module_exit(void)
if ((allowed_drive_mask & (1 << drive)) &&
fdc_state[FDC(drive)].version != FDC_NONE) {
del_gendisk(disks[drive]);
- device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ device_remove_file(&floppy_device[drive].dev,
+ &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
}
put_disk(disks[drive]);
@@ -4622,6 +5325,7 @@ static void __exit floppy_module_exit(void)
/* eject disk, if any */
fd_eject(0);
}
+
module_exit(floppy_module_exit);

module_param(floppy, charp, 0);
@@ -4633,9 +5337,10 @@ MODULE_LICENSE("GPL");

/* This doesn't actually get used other than for module information */
static const struct pnp_device_id floppy_pnpids[] = {
- { "PNP0700", 0 },
- { }
+ {"PNP0700", 0},
+ {}
};
+
MODULE_DEVICE_TABLE(pnp, floppy_pnpids);

#else



\
 
 \ /
  Last update: 2009-12-01 05:17    [W:0.119 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site