lkml.org 
[lkml]   [2009]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI: Always set prefetchable base/limit upper32 registers
On Mon, Nov 30, 2009 at 02:51:44PM -0700, Alex Williamson wrote:
> Prior to 1f82de10 we always initialized the upper 32bits of the
> prefetchable memory window, regardless of the address range used.
> Now we only touch it for a >32bit address, which means the upper32
> registers remain whatever the BIOS initialized them too.
>
> It's valid for the BIOS to set the upper32 base/limit to
> 0xffffffff/0x00000000, which makes us program prefetchable ranges
> like 0xffffffffabc00000 - 0x00000000abc00000
>
> Revert the chunk of 1f82de10 that made this conditional so we always
> write the upper32 registers and remove now unused pref_mem64 variable.
>
> Signed-off-by: Alex Williamson <alex.williamson@hp.com>

Reviewed-by: Grant Grundler <grundler@parisc-linux.org>

thanks,
grant

> ---
>
> v2:
> Remove pref_mem64 as it's now unused.
>
> drivers/pci/setup-bus.c | 11 +++--------
> 1 files changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index cb1a027..dd58c6a 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -142,7 +142,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
> struct pci_dev *bridge = bus->self;
> struct pci_bus_region region;
> u32 l, bu, lu, io_upper16;
> - int pref_mem64;
>
> if (pci_is_enabled(bridge))
> return;
> @@ -198,7 +197,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
> pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
>
> /* Set up PREF base/limit. */
> - pref_mem64 = 0;
> bu = lu = 0;
> pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
> if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
> @@ -206,7 +204,6 @@ static void pci_setup_bridge(struct pci_bus *bus)
> l = (region.start >> 16) & 0xfff0;
> l |= region.end & 0xfff00000;
> if (bus->resource[2]->flags & IORESOURCE_MEM_64) {
> - pref_mem64 = 1;
> bu = upper_32_bits(region.start);
> lu = upper_32_bits(region.end);
> width = 16;
> @@ -221,11 +218,9 @@ static void pci_setup_bridge(struct pci_bus *bus)
> }
> pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
>
> - if (pref_mem64) {
> - /* Set the upper 32 bits of PREF base & limit. */
> - pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
> - pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
> - }
> + /* Set the upper 32 bits of PREF base & limit. */
> + pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
> + pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
>
> pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2009-12-01 01:05    [W:0.150 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site