lkml.org 
[lkml]   [2009]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/9] pci: update pci bridge resource to get more big range for devices under it - v13
Kenji Kaneshige wrote:
> My system doesn't boot (hangup) with the following error messages
> from Fusion MPT SAS driver. Those are different from the one
> captured with the previous version of your patches.
>
>
> Fusion MPT SAS Host driver 3.04.12
> mptsas 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> mptbase: ioc0: Initiating bringup
> mptbase: ioc0: WARNING - Unexpected doorbell active!
> mptbase: ioc0: ERROR - Failed to come READY after reset! IocState=f0000000
> mptbase: ioc0: WARNING - ResetHistory bit failed to clear!
> mptbase: ioc0: ERROR - Diagnostic reset FAILED! (ffffffffh)
> mptbase: ioc0: WARNING - NOT READY WARNING!
> mptbase: ioc0: ERROR - didn't initialize properly! (-1)
> mptsas: probe of 0000:09:00.0 failed with error -1
> mptsas 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> mptbase: ioc1: Initiating bringup
> mptbase: ioc1: WARNING - Unexpected doorbell active!
> mptbase: ioc1: ERROR - Failed to come READY after reset! IocState=f0000000
> mptbase: ioc1: WARNING - ResetHistory bit failed to clear!
> mptbase: ioc1: ERROR - Diagnostic reset FAILED! (ffffffffh)
> mptbase: ioc1: WARNING - NOT READY WARNING!
> mptbase: ioc1: ERROR - didn't initialize properly! (-1)
> mptsas: probe of 0000:0a:00.0 failed with error -1
>
>
> I'll send the whole boot log privately.

thanks, at the same time please try "debug pci=try=1"

Yinghai


\
 
 \ /
  Last update: 2009-11-30 08:19    [W:0.268 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site