lkml.org 
[lkml]   [2009]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: mmotm 2009-11-24-16-47 uploaded (gpio_max7301)
akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
>
> http://userweb.kernel.org/~akpm/mmotm/
>
> and will soon be available at
>
> git://git.zen-sources.org/zen/mmotm.git
>
> It contains the following patches against 2.6.32-rc8:
>
> gpio-add-driver-for-max7300-i2c-gpio-extender.patch

This driver has build failures when CONFIG_I2C=m and
MAX7301=y, MAX7301_I2C=y, MAX7301_SPI=y:

drivers/built-in.o: In function `max7301_i2c_write':
max7301.c:(.text+0x2d9e): undefined reference to `i2c_smbus_write_byte_data'
drivers/built-in.o: In function `max7301_i2c_read':
max7301.c:(.text+0x2dc6): undefined reference to `i2c_smbus_read_byte_data'
drivers/built-in.o: In function `max7301_init':
max7301.c:(.init.text+0x42e): undefined reference to `i2c_register_driver'
max7301.c:(.init.text+0x496): undefined reference to `i2c_del_driver'
drivers/built-in.o: In function `max7301_exit':
max7301.c:(.exit.text+0x14): undefined reference to `i2c_del_driver'


This kconfig syntax:

config GPIO_MAX7301
tristate "Maxim MAX730x GPIO expander"
depends on I2C || SPI_MASTER

allows GPIO_MAX7301 to be y when SPI_MASTER=y and I2C=m.
If you want to do that, you'll need to handle CONFIG_I2C=m somehow.


--
~Randy


\
 
 \ /
  Last update: 2009-11-26 02:49    [W:1.047 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site