lkml.org 
[lkml]   [2009]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: Vortex86SX: only works with irqpoll
    From
    Hello Juergen,

    On Tue, Nov 24, 2009 at 9:31 AM, Otavio Salvador
    <otavio@ossystems.com.br> wrote:
    > I'll take a look on the dmesg output and see if I see something interesting :-)

    In fact I did find some interesting issues. First:

    PCI: Probing PCI hardware
    pci 0000:00:07.0: default IRQ router [17f3:6031]
    pci 0000:00:0a.0: BAR 0: address space collision on of device
    [0x0e2000-0x0e2fff]
    pci 0000:00:0a.0: BAR 0: can't allocate resource
    pci 0000:00:0a.1: BAR 0: address space collision on of device
    [0x0e3000-0x0e30ff]
    pci 0000:00:0a.1: BAR 0: can't allocate resource
    pci 0000:00:0b.0: BAR 0: address space collision on of device
    [0x0e0000-0x0e0fff]
    pci 0000:00:0b.0: BAR 0: can't allocate resource
    pci 0000:00:0b.1: BAR 0: address space collision on of device
    [0x0e1000-0x0e10ff]
    pci 0000:00:0b.1: BAR 0: can't allocate resource
    NET: Registered protocol family 2

    This is the same collision I have. Another interesting issue is that
    your disk is using the USB bus while mine uses IT821x.

    Is your network working? mine does not (inside of Linux but does for
    tftp booting).

    --
    Otavio Salvador O.S. Systems
    E-mail: otavio@ossystems.com.br http://www.ossystems.com.br
    Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br


    \
     
     \ /
      Last update: 2009-11-24 12:57    [W:0.021 / U:30.908 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site