lkml.org 
[lkml]   [2009]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 4/5] pata: Update experimental tags
Date
On Thursday 19 November 2009 17:27:38 Alan Cox wrote:
> > > > already have a buggy cable detection (since ->pre_reset ignores the mandatory
> > >
> > > Wrong.
> >
> > You cannot know it unless you know how chip operates internally. That's it.
>
> Read the code. How the chip operates is irrelevant.

lol, there is a genuine cable detection bug in pata_hpt3x2n on closer look...

Jeff, please apply the patch below.


From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_hpt3x2n: fix cable detection

The detection was reversed between primary and secondary ports.

Fix it to match hpt366 and the vendor driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ata/pata_hpt3x2n.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/drivers/ata/pata_hpt3x2n.c
===================================================================
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -133,7 +133,7 @@ static int hpt3x2n_cable_detect(struct a
/* Restore state */
pci_write_config_byte(pdev, 0x5B, scr2);

- if (ata66 & (1 << ap->port_no))
+ if (ata66 & (2 >> ap->port_no))
return ATA_CBL_PATA40;
else
return ATA_CBL_PATA80;

\
 
 \ /
  Last update: 2009-11-19 18:41    [W:0.104 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site