lkml.org 
[lkml]   [2009]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 01/16] tracing: convert trace_clock_local() as weak function
From
Date
On Mon, 2009-11-16 at 16:07 +0100, Thomas Gleixner wrote:
> On Sat, 14 Nov 2009, Wu Zhangjin wrote:
>
> > From: Wu Zhangjin <wuzhangjin@gmail.com>
> >
> > trace_clock_local() is based on the arch-specific sched_clock(), in X86,
> > it is tsc(64bit) based, which can give very high precision(about 1ns
> > with 1GHz). but in MIPS, the sched_clock() is jiffies based, which can
> > give only 10ms precison with 1000 HZ. which is not enough for tracing,
> > especially for Real Time system.
> >
> > so, we need to implement a MIPS specific sched_clock() to get higher
> > precision. There is a tsc like clock counter register in MIPS, whose
> > frequency is half of the processor, so, if the cpu frequency is 800MHz,
> > the time precision reaches 2.5ns, which is very good for tracing, even
> > for Real Time system.
> >
> > but 'Cause it is only 32bit long, which will rollover quickly, so, such
> > a sched_clock() will bring with extra load, which is not good for the
> > whole system. so, we only need to implement a arch-specific
> > trace_clock_local() for tracing. as a preparation, we convert it as a
> > weak function.
>
> Hmm, I'm not convinced that this is really a huge overhead.
>
> First of all the rollover happens once every 10 seconds on a 800MHz
> machine.
>
> Secondly we have a lockless implementation of extending 32bit counters
> to 63 bit which is used at least by ARM to provide a high resolution
> sched_clock implementation. See include/linux/cnt32_63.h and the users
> in arch/
>
> But that's a problem which can be discussed seperately and does not
> affect the rest of the tracing infrastructure. I really would
> recommend that you implement a sched_clock for the r4k machines based
> on cnt32_63 and measure the overhead. Having a fine granular
> sched_clock in general is probably not a bad thing.
>

Thanks very much for your prompt,

Will have a look at cnt32_to_63() in include/linux/cnt32_to_63.h later.

Thanks & Regards,
Wu Zhangjin



\
 
 \ /
  Last update: 2009-11-16 16:23    [W:0.057 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site