Messages in this thread Patch in this message | | | From | Dmitry Torokhov <> | Subject | [PATCH 5/5] mfd: pcf50633 - whitespace and formatting fixes | Date | Sun, 15 Nov 2009 22:09:05 -0800 |
| |
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> ---
drivers/mfd/pcf50633-core.c | 29 +++++++++++++++++------------ 1 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 2126563..f3203bd 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -2,7 +2,7 @@ * * (C) 2006-2008 by Openmoko, Inc. * Author: Harald Welte <laforge@openmoko.org> - * Balaji Rao <balajirrao@openmoko.org> + * Balaji Rao <balajirrao@openmoko.org> * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -28,7 +28,7 @@ /* Two MBCS registers used during cold start */ #define PCF50633_REG_MBCS1 0x4b #define PCF50633_REG_MBCS2 0x4c -#define PCF50633_MBCS1_USBPRES 0x01 +#define PCF50633_MBCS1_USBPRES 0x01 #define PCF50633_MBCS1_ADAPTPRES 0x01 static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data) @@ -53,7 +53,6 @@ static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data) dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg); return ret; - } /* Read a block of upto 32 regs */ @@ -348,8 +347,10 @@ static irqreturn_t pcf50633_irq(int irq, void *data) /* defeat 8s death from lowsys on A5 */ pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04); - /* We immediately read the usb and adapter status. We thus make sure - * only of USBINS/USBREM IRQ handlers are called */ + /* + * We immediately read the usb and adapter status. We thus make sure + * only of USBINS/USBREM IRQ handlers are called. + */ if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) { chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); if (chgstat & (0x3 << 4)) @@ -367,12 +368,14 @@ static irqreturn_t pcf50633_irq(int irq, void *data) pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS); } - dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x " - "INT4=0x%02x INT5=0x%02x\n", pcf_int[0], - pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); + dev_dbg(pcf->dev, + "INT1=0x%02x INT2=0x%02x INT3=0x%02x INT4=0x%02x INT5=0x%02x\n", + pcf_int[0], pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); - /* Some revisions of the chip don't have a 8s standby mode on - * ONKEY1S press. We try to manually do it in such cases. */ + /* + * Some revisions of the chip don't have a 8s standby mode on + * ONKEY1S press. We try to manually do it in such cases. + */ if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) { dev_info(pcf->dev, "ONKEY1S held for %d secs\n", pcf->onkey1s_held); @@ -665,8 +668,10 @@ static int __devinit pcf50633_probe(struct i2c_client *client, } if (enable_irq_wake(client->irq) < 0) - dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source" - "in this hardware revision", client->irq); + dev_err(pcf->dev, + "IRQ %u cannot be enabled as wake-up source " + "in this hardware revision\n", + client->irq); error = sysfs_create_group(&client->dev.kobj, &pcf_attr_group); if (error) {
| |