lkml.org 
[lkml]   [2009]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] [V2] mpc52xx_spi: add gpio chipselect
On Fri, Nov 13, 2009 at 4:10 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
> On Fri, Nov 13, 2009 at 11:41:17AM +0100, Luotao Fu wrote:
>> This one enables the mpc52xx_spi driver for usage of user defined gpio lines
>> as chipselect. This way we can control some more spi devices than only one
>>
>> V2 Changes:
>> * preinitialize the gpio as output in probe function and call gpio_set_value in
>>   the chip select function instead of calling direction_output every time.
>> * initialize the gpio line with output high, since we don't support CS_HIGH
>>   in the driver currently any way. change gpio value setting to default active
>>   low in chip select call.
>> * free the gpio array while error or removing.
>>
>> Signed-off-by: Luotao Fu <l.fu@pengutronix.de>

>> @@ -477,6 +520,12 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
>>   err_register:
>>       dev_err(&ms->master->dev, "initialization failed\n");
>>       spi_master_put(master);
>> + err_gpio:
>> +     while (i-- > 0)
>> +             gpio_free(ms->gpio_cs[i]);
>> +
>> +     if (ms->gpio_cs != NULL)
>> +             kfree(ms->gpio_cs);
>
> kfree() is NULL aware, so no if needed.

Not dangerous though. No need to respin just for this.

g.

--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2009-11-13 19:25    [from the cache]
©2003-2011 Jasper Spaans