lkml.org 
[lkml]   [2009]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 12/12] AppArmor: Enable configuring and building of the AppArmor security module
    Date
    Kconfig and Makefiles to enable configuration and building of AppArmor.

    Signed-off-by: John Johansen <john.johansen@canonical.com>
    ---
    security/Kconfig | 1 +
    security/Makefile | 2 +
    security/apparmor/.gitignore | 5 +++
    security/apparmor/Kconfig | 62 ++++++++++++++++++++++++++++++++++++++++++
    security/apparmor/Makefile | 25 +++++++++++++++++
    5 files changed, 95 insertions(+), 0 deletions(-)
    create mode 100644 security/apparmor/.gitignore
    create mode 100644 security/apparmor/Kconfig
    create mode 100644 security/apparmor/Makefile

    diff --git a/security/Kconfig b/security/Kconfig
    index fb363cd..2f5fb0f 100644
    --- a/security/Kconfig
    +++ b/security/Kconfig
    @@ -162,6 +162,7 @@ config LSM_MMAP_MIN_ADDR
    source security/selinux/Kconfig
    source security/smack/Kconfig
    source security/tomoyo/Kconfig
    +source security/apparmor/Kconfig

    source security/integrity/ima/Kconfig

    diff --git a/security/Makefile b/security/Makefile
    index 95ecc06..8bcd805 100644
    --- a/security/Makefile
    +++ b/security/Makefile
    @@ -6,6 +6,7 @@ obj-$(CONFIG_KEYS) += keys/
    subdir-$(CONFIG_SECURITY_SELINUX) += selinux
    subdir-$(CONFIG_SECURITY_SMACK) += smack
    subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo
    +subdir-$(CONFIG_SECURITY_APPARMOR) += apparmor

    # always enable default capabilities
    obj-y += commoncap.o min_addr.o
    @@ -18,6 +19,7 @@ obj-$(CONFIG_SECURITY_SELINUX) += selinux/built-in.o
    obj-$(CONFIG_SECURITY_SMACK) += smack/built-in.o
    obj-$(CONFIG_AUDIT) += lsm_audit.o
    obj-$(CONFIG_SECURITY_TOMOYO) += tomoyo/built-in.o
    +obj-$(CONFIG_SECURITY_APPARMOR) += apparmor/built-in.o
    obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o
    obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o

    diff --git a/security/apparmor/.gitignore b/security/apparmor/.gitignore
    new file mode 100644
    index 0000000..0a0a99f
    --- /dev/null
    +++ b/security/apparmor/.gitignore
    @@ -0,0 +1,5 @@
    +#
    +# Generated include files
    +#
    +af_names.h
    +capability_names.h
    diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
    new file mode 100644
    index 0000000..01c8754
    --- /dev/null
    +++ b/security/apparmor/Kconfig
    @@ -0,0 +1,62 @@
    +config SECURITY_APPARMOR
    + bool "AppArmor support"
    + depends on SECURITY && SECURITY_NETWORK && NET && INET
    + select AUDIT
    + select SECURITY_PATH
    + select SECURITYFS
    + default n
    + help
    + This enables the AppArmor security module.
    + Required userspace tools (if they are not included in your
    + distribution) and further information may be found at
    + <http://forge.novell.com/modules/xfmod/project/?apparmor>
    +
    + If you are unsure how to answer this question, answer N.
    +
    +config SECURITY_APPARMOR_NETWORK
    + bool "AppArmor network support"
    + depends on SECURITY_APPARMOR
    + default n
    + help
    + This enables AppArmor to mediate applications network use.
    + This will enable the SECURITY_NETWORK hooks.
    +
    +config SECURITY_APPARMOR_BOOTPARAM_VALUE
    + int "AppArmor boot parameter default value"
    + depends on SECURITY_APPARMOR
    + range 0 1
    + default 1
    + help
    + This option sets the default value for the kernel parameter
    + 'apparmor', which allows AppArmor to be enabled or disabled
    + at boot. If this option is set to 0 (zero), the AppArmor
    + kernel parameter will default to 0, disabling AppArmor at
    + bootup. If this option is set to 1 (one), the AppArmor
    + kernel parameter will default to 1, enabling AppArmor at
    + bootup.
    +
    + If you are unsure how to answer this question, answer 1.
    +
    +config SECURITY_APPARMOR_DISABLE
    + bool "AppArmor runtime disable"
    + depends on SECURITY_APPARMOR
    + default n
    + help
    + This option enables writing to a apparmorfs node 'disable', which
    + allows AppArmor to be disabled at runtime prior to the policy load.
    + AppArmor will then remain disabled until the next boot.
    + This option is similar to the apparmor.enabled=0 boot parameter,
    + but is to support runtime disabling of AppArmor, e.g. from
    + /sbin/init, for portability across platforms where boot
    + parameters are difficult to employ.
    +
    + If you are unsure how to answer this question, answer N.
    +
    +config SECURITY_APPARMOR_COMPAT_24
    + bool "Enable AppArmor 2.4 compatability"
    + depends on SECURITY_APPARMOR
    + default y
    + help
    + This option enables compatability with AppArmor 2.4. It is
    + recommended if compatability with older versions of AppArmor
    + is desired.
    diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile
    new file mode 100644
    index 0000000..02d7f3c
    --- /dev/null
    +++ b/security/apparmor/Makefile
    @@ -0,0 +1,25 @@
    +# Makefile for AppArmor Linux Security Module
    +#
    +obj-$(CONFIG_SECURITY_APPARMOR) += apparmor.o
    +
    +apparmor-y := apparmorfs.o audit.o capability.o context.o ipc.o lib.o match.o \
    + path.o domain.o policy.o policy_unpack.o procattr.o lsm.o \
    + resource.o sid.o file.o
    +
    +apparmor-$(CONFIG_SECURITY_APPARMOR_NETWORK) += net.o
    +apparmor-$(CONFIG_SECURITY_APPARMOR_COMPAT_24) += apparmorfs-24.o
    +
    +clean-files: capability_names.h af_names.h
    +
    +quiet_cmd_make-caps = GEN $@
    +cmd_make-caps = echo "static const char *capability_names[] = {" > $@ ; sed -n -e "/CAP_FS_MASK/d" -e "s/^\#define[ \\t]\\+CAP_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\$$/[\\2] = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
    +
    +quiet_cmd_make-af = GEN $@
    +cmd_make-af = echo "static const char *address_family_names[] = {" > $@ ; sed -n -e "/AF_MAX/d" -e "/AF_LOCAL/d" -e "s/^\#define[ \\t]\\+AF_\\([A-Z0-9_]\\+\\)[ \\t]\\+\\([0-9]\\+\\)\\(.*\\)\$$/[\\2] = \"\\1\",/p" $< | tr A-Z a-z >> $@ ; echo "};" >> $@
    +
    +$(obj)/capability.o : $(obj)/capability_names.h
    +$(obj)/net.o : $(obj)/af_names.h
    +$(obj)/capability_names.h : $(srctree)/include/linux/capability.h
    + $(call cmd,make-caps)
    +$(obj)/af_names.h : $(srctree)/include/linux/socket.h
    + $(call cmd,make-af)
    --
    1.6.3.3


    \
     
     \ /
      Last update: 2009-11-10 17:17    [W:4.272 / U:0.132 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site