lkml.org 
[lkml]   [2009]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] LIS3LV02D: I2C support
Date
I2C bus support for lis3lv02d and variant accelerometer chips

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
---
drivers/hwmon/Kconfig | 17 ++++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/lis3lv02d_i2c.c | 184 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/lis3lv02d_i2c.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 69222bc..f059dc1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -992,6 +992,23 @@ config SENSORS_LIS3_SPI
will be called lis3lv02d and a specific module for the SPI transport
is called lis3lv02d_spi.

+config SENSORS_LIS3_I2C
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
+ depends on I2C && INPUT
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the device to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the I2C transport
+ is called lis3lv02d_i2c.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4a34375..699e372 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
+obj-$(CONFIG_SENSORS_LIS3_I2C) += lis3lv02d.o lis3lv02d_i2c.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM70) += lm70.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
new file mode 100644
index 0000000..51f858d
--- /dev/null
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -0,0 +1,184 @@
+/*
+ * drivers/hwmon/lis3lv02d_i2c.c
+ *
+ * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
+ * Driver is based on corresponding SPI driver written by Daniel Mack
+ * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
+ *
+ * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "lis3lv02d.h"
+
+#define DRV_NAME "lis3lv02d_i2c"
+
+static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ return i2c_smbus_write_byte_data(c, reg, value);
+}
+
+static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
+{
+ struct i2c_client *c = lis3->bus_priv;
+ *v = i2c_smbus_read_byte_data(c, reg);
+ return 0;
+}
+
+static int lis3_i2c_init(struct lis3lv02d *lis3)
+{
+ u8 reg;
+ int ret;
+
+ /* power up the device */
+ ret = lis3->read(lis3, CTRL_REG1, &reg);
+ if (ret < 0)
+ return ret;
+
+ reg |= CTRL1_PD0;
+ return lis3->write(lis3, CTRL_REG1, reg);
+}
+
+/* Default axis mapping but it can be overwritten by platform data */
+static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X,
+ LIS3_DEV_Y,
+ LIS3_DEV_Z };
+
+static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+ if (pdata) {
+ if (pdata->axis_x)
+ lis3lv02d_axis_map.x = pdata->axis_x;
+
+ if (pdata->axis_y)
+ lis3lv02d_axis_map.y = pdata->axis_y;
+
+ if (pdata->axis_z)
+ lis3lv02d_axis_map.z = pdata->axis_z;
+
+ if (pdata->setup_resources)
+ ret = pdata->setup_resources();
+
+ if (ret)
+ goto fail;
+ }
+
+ lis3_dev.pdata = pdata;
+ lis3_dev.bus_priv = client;
+ lis3_dev.init = lis3_i2c_init;
+ lis3_dev.read = lis3_i2c_read;
+ lis3_dev.write = lis3_i2c_write;
+ lis3_dev.irq = client->irq;
+ lis3_dev.ac = lis3lv02d_axis_map;
+
+ i2c_set_clientdata(client, &lis3_dev);
+ ret = lis3lv02d_init_device(&lis3_dev);
+fail:
+ return ret;
+}
+
+static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
+{
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+ struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
+
+ if (pdata && pdata->release_resources)
+ pdata->release_resources();
+
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(lis3);
+
+ return lis3lv02d_remove_fs(&lis3_dev);
+}
+
+#ifdef CONFIG_PM
+static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ if (!lis3->pdata->wakeup_flags)
+ lis3lv02d_poweroff(lis3);
+ return 0;
+}
+
+static int lis3lv02d_i2c_resume(struct i2c_client *client)
+{
+ struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+ if (!lis3->pdata->wakeup_flags)
+ lis3lv02d_poweron(lis3);
+ return 0;
+}
+
+static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
+{
+ lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
+}
+#else
+#define lis3lv02d_i2c_suspend NULL
+#define lis3lv02d_i2c_resume NULL
+#define lis3lv02d_i2c_shutdown NULL
+#endif
+
+static const struct i2c_device_id lis3lv02d_id[] = {
+ {"lis3lv02d", 0 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
+
+static struct i2c_driver lis3lv02d_i2c_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .suspend = lis3lv02d_i2c_suspend,
+ .shutdown = lis3lv02d_i2c_shutdown,
+ .resume = lis3lv02d_i2c_resume,
+ .probe = lis3lv02d_i2c_probe,
+ .remove = __devexit_p(lis3lv02d_i2c_remove),
+ .id_table = lis3lv02d_id,
+};
+
+static int __init lis3lv02d_init(void)
+{
+ return i2c_add_driver(&lis3lv02d_i2c_driver);
+}
+
+static void __exit lis3lv02d_exit(void)
+{
+ i2c_del_driver(&lis3lv02d_i2c_driver);
+}
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("lis3lv02d I2C interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("i2c:" DRV_NAME);
+
+module_init(lis3lv02d_init);
+module_exit(lis3lv02d_exit);
--
1.5.6.3


\
 
 \ /
  Last update: 2009-10-05 09:33    [W:0.066 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site