lkml.org 
[lkml]   [2009]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Linux 2.6.31.2
diff --git a/MAINTAINERS b/MAINTAINERS
index 8dca9d8..2ccc21c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -897,6 +897,12 @@ W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
F: drivers/net/wireless/ath/ar9170/

+ATK0110 HWMON DRIVER
+M: Luca Tettamanti <kronos.it@gmail.com>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: drivers/hwmon/asus_atk0110.c
+
ATI_REMOTE2 DRIVER
M: Ville Syrjala <syrjala@sci.fi>
S: Maintained
diff --git a/Makefile b/Makefile
index ea8734a..d3a69fd 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
-EXTRAVERSION = .1
+EXTRAVERSION = .2
NAME = Man-Eating Seals of Antiquity

# *DOCUMENTATION*
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index e302dae..8e059e5 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -1016,7 +1016,7 @@ marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *m
{
struct marvel_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}

static int
diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c
index 319fcb7..7668649 100644
--- a/arch/alpha/kernel/core_titan.c
+++ b/arch/alpha/kernel/core_titan.c
@@ -680,7 +680,7 @@ titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *me
{
struct titan_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}

static int
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 00edd04..85457b2 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -198,7 +198,7 @@ extern unsigned long size_for_memory(unsigned long max);

extern int iommu_reserve(struct pci_iommu_arena *, long, long);
extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
extern int iommu_unbind(struct pci_iommu_arena *, long, long);


diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index bfb880a..eadd63b 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -880,7 +880,7 @@ iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)

int
iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
- unsigned long *physaddrs)
+ struct page **pages)
{
unsigned long flags;
unsigned long *ptes;
@@ -900,7 +900,7 @@ iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
}

for(i = 0, j = pg_start; i < pg_count; i++, j++)
- ptes[j] = mk_iommu_pte(physaddrs[i]);
+ ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));

spin_unlock_irqrestore(&arena->lock, flags);

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c06..629e05d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
}

- if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
- {
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+ (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL))) {
dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index a7e210b..0cd2e34 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -176,7 +176,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
#define HAVE_PAGE_AGP

/* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
+#if _PAGE_SPECIAL != 0
#define __HAVE_ARCH_PTE_SPECIAL
#endif

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 627767d..d8e6725 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
#include <asm/tlbflush.h>
#include <asm/tlb.h>

+#include "mmu_decl.h"
+
static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
static unsigned long pte_freelist_forced_free;

@@ -119,7 +121,7 @@ void pte_free_finish(void)
/*
* Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
*/
-static pte_t do_dcache_icache_coherency(pte_t pte)
+static pte_t do_dcache_icache_coherency(pte_t pte, unsigned long addr)
{
unsigned long pfn = pte_pfn(pte);
struct page *page;
@@ -128,6 +130,17 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
return pte;
page = pfn_to_page(pfn);

+#ifdef CONFIG_8xx
+ /* On 8xx, cache control instructions (particularly
+ * "dcbst" from flush_dcache_icache) fault as write
+ * operation if there is an unpopulated TLB entry
+ * for the address in question. To workaround that,
+ * we invalidate the TLB here, thus avoiding dcbst
+ * misbehaviour.
+ */
+ _tlbil_va(addr, 0 /* 8xx doesn't care about PID */);
+#endif
+
if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
pr_devel("do_dcache_icache_coherency... flushing\n");
flush_dcache_icache_page(page);
@@ -198,7 +211,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte
*/
pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
if (pte_need_exec_flush(pte, 1))
- pte = do_dcache_icache_coherency(pte);
+ pte = do_dcache_icache_coherency(pte, addr);

/* Perform the setting of the PTE */
__set_pte_at(mm, addr, ptep, pte, 0);
@@ -216,7 +229,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
{
int changed;
if (!dirty && pte_need_exec_flush(entry, 0))
- entry = do_dcache_icache_coherency(entry);
+ entry = do_dcache_icache_coherency(entry, address);
changed = !pte_same(*(ptep), entry);
if (changed) {
if (!(vma->vm_flags & VM_HUGETLB))
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 83c1bc8..456a304 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -299,6 +299,8 @@ do { \

#ifdef CONFIG_X86_32

+#define STACK_RND_MASK (0x7ff)
+
#define VDSO_HIGH_BASE (__fix_to_virt(FIX_VDSO))

#define ARCH_DLINFO ARCH_DLINFO_IA32(vdso_enabled)
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 77a6850..03a0cbd 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -422,7 +422,7 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
unsigned long val;

val = (1UL << UVH_IPI_INT_SEND_SHFT) |
- ((apicid & 0x3f) << UVH_IPI_INT_APIC_ID_SHFT) |
+ ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 2a50ef8..fde0cd3 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -605,9 +605,10 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
return 0;
}

-static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry)
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+ unsigned int entry)
{
- data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+ powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
}

static void print_basics(struct powernow_k8_data *data)
@@ -914,13 +915,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
"bad value %d.\n", i, index);
printk(KERN_ERR PFX "Please report to BIOS "
"manufacturer\n");
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
}
rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
if (!(hi & HW_PSTATE_VALID_MASK)) {
dprintk("invalid pstate %d, ignoring\n", index);
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
}

@@ -970,7 +971,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
/* verify frequency is OK */
if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
dprintk("invalid freq %u kHz, ignoring\n", freq);
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
}

@@ -978,7 +979,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
* BIOSs are using "off" to indicate invalid */
if (vid == VID_OFF) {
dprintk("invalid vid %u, ignoring\n", vid);
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
}

@@ -997,7 +998,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,

dprintk("double low frequency table entry, "
"ignoring it.\n");
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
} else
cntlofreq = i;
@@ -1009,7 +1010,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
(unsigned int)
(data->acpi_data.states[i].core_frequency
* 1000));
- invalidate_entry(data, i);
+ invalidate_entry(powernow_table, i);
continue;
}
}
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index a5cdb35..4712293 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2713,12 +2713,6 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)

ASSERT(vcpu);

- if (vcpu->kvm->arch.n_requested_mmu_pages)
- vcpu->kvm->arch.n_free_mmu_pages =
- vcpu->kvm->arch.n_requested_mmu_pages;
- else
- vcpu->kvm->arch.n_free_mmu_pages =
- vcpu->kvm->arch.n_alloc_mmu_pages;
/*
* When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
* Therefore we need to allocate shadow page tables in the first
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index b5fa966..6a768ff 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1569,7 +1569,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
vcpu->arch.cr0 = cr0;
vmx_set_cr4(vcpu, vcpu->arch.cr4);
*hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
- *hw_cr0 &= ~X86_CR0_WP;
} else if (!is_paging(vcpu)) {
/* From nonpaging to paging */
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
@@ -1578,9 +1577,10 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
CPU_BASED_CR3_STORE_EXITING));
vcpu->arch.cr0 = cr0;
vmx_set_cr4(vcpu, vcpu->arch.cr4);
- if (!(vcpu->arch.cr0 & X86_CR0_WP))
- *hw_cr0 &= ~X86_CR0_WP;
}
+
+ if (!(cr0 & X86_CR0_WP))
+ *hw_cr0 &= ~X86_CR0_WP;
}

static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3d36045..91a077f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1448,6 +1448,10 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
do_cpuid_ent(&cpuid_entries[nent], func, 0,
&nent, cpuid->nent);
+ r = -E2BIG;
+ if (nent >= cpuid->nent)
+ goto out_free;
+
r = -EFAULT;
if (copy_to_user(entries, cpuid_entries,
nent * sizeof(struct kvm_cpuid_entry2)))
@@ -3198,6 +3202,9 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
if (!kvm_x86_ops->update_cr8_intercept)
return;

+ if (!vcpu->arch.apic)
+ return;
+
if (!vcpu->arch.apic->vapic_addr)
max_irr = kvm_lapic_find_highest_irr(vcpu);
else
@@ -4118,13 +4125,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,

vcpu->arch.cr2 = sregs->cr2;
mmu_reset_needed |= vcpu->arch.cr3 != sregs->cr3;
-
- down_read(&vcpu->kvm->slots_lock);
- if (gfn_to_memslot(vcpu->kvm, sregs->cr3 >> PAGE_SHIFT))
- vcpu->arch.cr3 = sregs->cr3;
- else
- set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
- up_read(&vcpu->kvm->slots_lock);
+ vcpu->arch.cr3 = sregs->cr3;

kvm_set_cr8(vcpu, sregs->cr8);

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index eefdeee..0088329 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,11 @@
obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
pat.o pgtable.o gup.o

+# Make sure __phys_addr has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_ioremap.o := $(nostackp)
+CFLAGS_init.o := $(nostackp)
+
obj-$(CONFIG_SMP) += tlb.o

obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 1658296..c8191de 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -29,13 +29,26 @@
#include <linux/random.h>
#include <linux/limits.h>
#include <linux/sched.h>
+#include <asm/elf.h>
+
+static unsigned int stack_maxrandom_size(void)
+{
+ unsigned int max = 0;
+ if ((current->flags & PF_RANDOMIZE) &&
+ !(current->personality & ADDR_NO_RANDOMIZE)) {
+ max = ((-1U) & STACK_RND_MASK) << PAGE_SHIFT;
+ }
+
+ return max;
+}
+

/*
* Top of mmap area (just below the process stack).
*
- * Leave an at least ~128 MB hole.
+ * Leave an at least ~128 MB hole with possible stack randomization.
*/
-#define MIN_GAP (128*1024*1024)
+#define MIN_GAP (128*1024*1024UL + stack_maxrandom_size())
#define MAX_GAP (TASK_SIZE/6*5)

/*
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e245775..fbb46d6 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -143,6 +143,7 @@ void clflush_cache_range(void *vaddr, unsigned int size)

mb();
}
+EXPORT_SYMBOL_GPL(clflush_cache_range);

static void __cpa_flush_all(void *arg)
{
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 7410640..3bb4fc2 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -8,6 +8,7 @@ endif
# Make sure early boot has no stackprotector
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_enlighten.o := $(nostackp)
+CFLAGS_mmu.o := $(nostackp)

obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
@@ -16,3 +17,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
+
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index eb33aaa..3839a0f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -51,6 +51,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/reboot.h>
+#include <asm/stackprotector.h>

#include "xen-ops.h"
#include "mmu.h"
@@ -330,18 +331,28 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
unsigned long frames[pages];
int f;

- /* A GDT can be up to 64k in size, which corresponds to 8192
- 8-byte entries, or 16 4k pages.. */
+ /*
+ * A GDT can be up to 64k in size, which corresponds to 8192
+ * 8-byte entries, or 16 4k pages..
+ */

BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);

for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
int level;
- pte_t *ptep = lookup_address(va, &level);
+ pte_t *ptep;
unsigned long pfn, mfn;
void *virt;

+ /*
+ * The GDT is per-cpu and is in the percpu data area.
+ * That can be virtually mapped, so we need to do a
+ * page-walk to get the underlying MFN for the
+ * hypercall. The page can also be in the kernel's
+ * linear range, so we need to RO that mapping too.
+ */
+ ptep = lookup_address(va, &level);
BUG_ON(ptep == NULL);

pfn = pte_pfn(*ptep);
@@ -358,6 +369,44 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
BUG();
}

+/*
+ * load_gdt for early boot, when the gdt is only mapped once
+ */
+static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+{
+ unsigned long va = dtr->address;
+ unsigned int size = dtr->size + 1;
+ unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
+ int f;
+
+ /*
+ * A GDT can be up to 64k in size, which corresponds to 8192
+ * 8-byte entries, or 16 4k pages..
+ */
+
+ BUG_ON(size > 65536);
+ BUG_ON(va & ~PAGE_MASK);
+
+ for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
+ pte_t pte;
+ unsigned long pfn, mfn;
+
+ pfn = virt_to_pfn(va);
+ mfn = pfn_to_mfn(pfn);
+
+ pte = pfn_pte(pfn, PAGE_KERNEL_RO);
+
+ if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
+ BUG();
+
+ frames[f] = mfn;
+ }
+
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
+}
+
static void load_TLS_descriptor(struct thread_struct *t,
unsigned int cpu, unsigned int i)
{
@@ -581,6 +630,29 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
preempt_enable();
}

+/*
+ * Version of write_gdt_entry for use at early boot-time needed to
+ * update an entry as simply as possible.
+ */
+static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+ const void *desc, int type)
+{
+ switch (type) {
+ case DESC_LDT:
+ case DESC_TSS:
+ /* ignore */
+ break;
+
+ default: {
+ xmaddr_t maddr = virt_to_machine(&dt[entry]);
+
+ if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
+ dt[entry] = *(struct desc_struct *)desc;
+ }
+
+ }
+}
+
static void xen_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
@@ -965,6 +1037,23 @@ static const struct machine_ops __initdata xen_machine_ops = {
.emergency_restart = xen_emergency_restart,
};

+/*
+ * Set up the GDT and segment registers for -fstack-protector. Until
+ * we do this, we have to be careful not to call any stack-protected
+ * function, which is most of the kernel.
+ */
+static void __init xen_setup_stackprotector(void)
+{
+ pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
+ pv_cpu_ops.load_gdt = xen_load_gdt_boot;
+
+ setup_stack_canary_segment(0);
+ switch_to_new_gdt(0);
+
+ pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry;
+ pv_cpu_ops.load_gdt = xen_load_gdt;
+}
+
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
@@ -983,14 +1072,34 @@ asmlinkage void __init xen_start_kernel(void)
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;

-#ifdef CONFIG_X86_64
/*
- * Setup percpu state. We only need to do this for 64-bit
- * because 32-bit already has %fs set properly.
+ * Set up some pagetable state before starting to set any ptes.
*/
- load_percpu_segment(0);
+
+ /* Prevent unwanted bits from being set in PTEs. */
+ __supported_pte_mask &= ~_PAGE_GLOBAL;
+ if (!xen_initial_domain())
+ __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
+ __supported_pte_mask |= _PAGE_IOMAP;
+
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
#endif

+ xen_setup_features();
+
+ /* Get mfn list */
+ if (!xen_feature(XENFEAT_auto_translated_physmap))
+ xen_build_dynamic_phys_to_machine();
+
+ /*
+ * Set up kernel GDT and segment registers, mainly so that
+ * -fstack-protector code can be executed.
+ */
+ xen_setup_stackprotector();
+
xen_init_irq_ops();
xen_init_cpuid_mask();

@@ -1001,8 +1110,6 @@ asmlinkage void __init xen_start_kernel(void)
set_xen_basic_apic_ops();
#endif

- xen_setup_features();
-
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1019,22 +1126,8 @@ asmlinkage void __init xen_start_kernel(void)

xen_smp_init();

- /* Get mfn list */
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- xen_build_dynamic_phys_to_machine();
-
pgd = (pgd_t *)xen_start_info->pt_base;

- /* Prevent unwanted bits from being set in PTEs. */
- __supported_pte_mask &= ~_PAGE_GLOBAL;
- if (!xen_initial_domain())
- __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
-#ifdef CONFIG_X86_64
- /* Work out if we support NX */
- check_efer();
-#endif
-
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 429834e..fe03eee 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -236,6 +236,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
ctxt->user_regs.ss = __KERNEL_DS;
#ifdef CONFIG_X86_32
ctxt->user_regs.fs = __KERNEL_PERCPU;
+ ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
#else
ctxt->gs_base_kernel = per_cpu_offset(cpu);
#endif
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 5601506..36a5141 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -187,7 +187,6 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
struct xen_spinlock *prev;
int irq = __get_cpu_var(lock_kicker_irq);
int ret;
- unsigned long flags;
u64 start;

/* If kicker interrupts not initialized yet, just spin */
@@ -199,16 +198,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
/* announce we're spinning */
prev = spinning_lock(xl);

- flags = __raw_local_save_flags();
- if (irq_enable) {
- ADD_STATS(taken_slow_irqenable, 1);
- raw_local_irq_enable();
- }
-
ADD_STATS(taken_slow, 1);
ADD_STATS(taken_slow_nested, prev != NULL);

do {
+ unsigned long flags;
+
/* clear pending */
xen_clear_irq_pending(irq);

@@ -228,6 +223,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
goto out;
}

+ flags = __raw_local_save_flags();
+ if (irq_enable) {
+ ADD_STATS(taken_slow_irqenable, 1);
+ raw_local_irq_enable();
+ }
+
/*
* Block until irq becomes pending. If we're
* interrupted at this point (after the trylock but
@@ -238,13 +239,15 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
* pending.
*/
xen_poll_irq(irq);
+
+ raw_local_irq_restore(flags);
+
ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */

kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));

out:
- raw_local_irq_restore(flags);
unspinning_lock(xl, prev);
spin_time_accum_blocked(start);

@@ -323,8 +326,13 @@ static void xen_spin_unlock(struct raw_spinlock *lock)
smp_wmb(); /* make sure no writes get moved after unlock */
xl->lock = 0; /* release lock */

- /* make sure unlock happens before kick */
- barrier();
+ /*
+ * Make sure unlock happens before checking for waiting
+ * spinners. We need a strong barrier to enforce the
+ * write-read ordering to different memory locations, as the
+ * CPU makes no implied guarantees about their ordering.
+ */
+ mb();

if (unlikely(xl->spinners))
xen_spin_unlock_slow(xl);
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index 12158e0..da9d6d2 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -57,7 +57,7 @@ ACPI_MODULE_NAME("pci_slot");
MY_NAME , ## arg); \
} while (0)

-#define SLOT_NAME_SIZE 20 /* Inspired by #define in acpiphp.h */
+#define SLOT_NAME_SIZE 21 /* Inspired by #define in acpiphp.h */

struct acpi_pci_slot {
acpi_handle root_handle; /* handle of the root bridge */
@@ -149,7 +149,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
return AE_OK;
}

- snprintf(name, sizeof(name), "%u", (u32)sun);
+ snprintf(name, sizeof(name), "%llu", sun);
pci_slot = pci_create_slot(pci_bus, device, name, NULL);
if (IS_ERR(pci_slot)) {
err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fe3eba5..289c4f8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2861,8 +2861,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ahci_asus_m2a_vm_32bit_only(pdev))
hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;

- if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
- pci_enable_msi(pdev);
+ if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
+ pci_intx(pdev, 1);

/* save initial config */
ahci_save_initial_config(pdev, hpriv);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33a74f1..567f3f7 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -307,6 +307,9 @@ static unsigned long nv_mode_filter(struct ata_device *dev,
limit |= ATA_MASK_PIO;
if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
+ /* PIO4, MWDMA2, UDMA2 should always be supported regardless of
+ cable detection result */
+ limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2);

ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
"BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
diff --git a/drivers/base/base.h b/drivers/base/base.h
index b528145..1e52c12 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -104,7 +104,7 @@ extern int system_bus_init(void);
extern int cpu_dev_init(void);

extern int bus_add_device(struct device *dev);
-extern void bus_attach_device(struct device *dev);
+extern void bus_probe_device(struct device *dev);
extern void bus_remove_device(struct device *dev);

extern int bus_add_driver(struct device_driver *drv);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 4b04a15..973bf2a 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -459,8 +459,9 @@ static inline void remove_deprecated_bus_links(struct device *dev) { }
* bus_add_device - add device to bus
* @dev: device being added
*
+ * - Add device's bus attributes.
+ * - Create links to device's bus.
* - Add the device to its bus's list of devices.
- * - Create link to device's bus.
*/
int bus_add_device(struct device *dev)
{
@@ -483,6 +484,7 @@ int bus_add_device(struct device *dev)
error = make_deprecated_bus_links(dev);
if (error)
goto out_deprecated;
+ klist_add_tail(&dev->p->knode_bus, &bus->p->klist_devices);
}
return 0;

@@ -498,24 +500,19 @@ out_put:
}

/**
- * bus_attach_device - add device to bus
- * @dev: device tried to attach to a driver
+ * bus_probe_device - probe drivers for a new device
+ * @dev: device to probe
*
- * - Add device to bus's list of devices.
- * - Try to attach to driver.
+ * - Automatically probe for a driver if the bus allows it.
*/
-void bus_attach_device(struct device *dev)
+void bus_probe_device(struct device *dev)
{
struct bus_type *bus = dev->bus;
- int ret = 0;
+ int ret;

- if (bus) {
- if (bus->p->drivers_autoprobe)
- ret = device_attach(dev);
+ if (bus && bus->p->drivers_autoprobe) {
+ ret = device_attach(dev);
WARN_ON(ret < 0);
- if (ret >= 0)
- klist_add_tail(&dev->p->knode_bus,
- &bus->p->klist_devices);
}
}

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 7ecb193..c34774d 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -945,7 +945,7 @@ int device_add(struct device *dev)
BUS_NOTIFY_ADD_DEVICE, dev);

kobject_uevent(&dev->kobj, KOBJ_ADD);
- bus_attach_device(dev);
+ bus_probe_device(dev);
if (parent)
klist_add_tail(&dev->p->knode_parent,
&parent->p->klist_children);
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index dee0f1f..6cf88b6 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -679,23 +679,39 @@ static void intel_i830_setup_flush(void)
if (!intel_private.i8xx_page)
return;

- /* make page uncached */
- map_page_into_agp(intel_private.i8xx_page);
-
intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
if (!intel_private.i8xx_flush_page)
intel_i830_fini_flush();
}

+static void
+do_wbinvd(void *null)
+{
+ wbinvd();
+}
+
+/* The chipset_flush interface needs to get data that has already been
+ * flushed out of the CPU all the way out to main memory, because the GPU
+ * doesn't snoop those buffers.
+ *
+ * The 8xx series doesn't have the same lovely interface for flushing the
+ * chipset write buffers that the later chips do. According to the 865
+ * specs, it's 64 octwords, or 1KB. So, to get those previous things in
+ * that buffer out, we just fill 1KB and clflush it out, on the assumption
+ * that it'll push whatever was in there out. It appears to work.
+ */
static void intel_i830_chipset_flush(struct agp_bridge_data *bridge)
{
unsigned int *pg = intel_private.i8xx_flush_page;
- int i;

- for (i = 0; i < 256; i += 2)
- *(pg + i) = i;
+ memset(pg, 0, 1024);

- wmb();
+ if (cpu_has_clflush) {
+ clflush_cache_range(pg, 1024);
+ } else {
+ if (on_each_cpu(do_wbinvd, NULL, 1) != 0)
+ printk(KERN_ERR "Timed out waiting for cache flush.\n");
+ }
}

/* The intel i830 automatically initializes the agp aperture during POST.
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index b33d668..53761ce 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -120,8 +120,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to, buf, c);
/* And shovel */
- tty_flip_buffer_push(to);
- tty_wakeup(tty);
+ if (c) {
+ tty_flip_buffer_push(to);
+ tty_wakeup(tty);
+ }
}
return c;
}
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index a3afa0c..9fc9517 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1184,6 +1184,7 @@ int tty_init_termios(struct tty_struct *tty)
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
return 0;
}
+EXPORT_SYMBOL_GPL(tty_init_termios);

/**
* tty_driver_install_tty() - install a tty entry in the driver
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 9769b11..549bd0f 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -96,6 +96,14 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty)
}
EXPORT_SYMBOL(tty_port_tty_set);

+static void tty_port_shutdown(struct tty_port *port)
+{
+ if (port->ops->shutdown &&
+ test_and_clear_bit(ASYNC_INITIALIZED, &port->flags))
+ port->ops->shutdown(port);
+
+}
+
/**
* tty_port_hangup - hangup helper
* @port: tty port
@@ -116,6 +124,7 @@ void tty_port_hangup(struct tty_port *port)
port->tty = NULL;
spin_unlock_irqrestore(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
+ tty_port_shutdown(port);
}
EXPORT_SYMBOL(tty_port_hangup);

@@ -296,15 +305,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f

if (port->count) {
spin_unlock_irqrestore(&port->lock, flags);
+ if (port->ops->drop)
+ port->ops->drop(port);
return 0;
}
- port->flags |= ASYNC_CLOSING;
+ set_bit(ASYNC_CLOSING, &port->flags);
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
/* Don't block on a stalled port, just pull the chain */
if (tty->flow_stopped)
tty_driver_flush_buffer(tty);
- if (port->flags & ASYNC_INITIALIZED &&
+ if (test_bit(ASYNCB_INITIALIZED, &port->flags) &&
port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, port->closing_wait);
if (port->drain_delay) {
@@ -318,6 +329,9 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
timeout = 2 * HZ;
schedule_timeout_interruptible(timeout);
}
+ /* Don't call port->drop for the last reference. Callers will want
+ to drop the last active reference in ->shutdown() or the tty
+ shutdown path */
return 1;
}
EXPORT_SYMBOL(tty_port_close_start);
@@ -348,3 +362,14 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL(tty_port_close_end);
+
+void tty_port_close(struct tty_port *port, struct tty_struct *tty,
+ struct file *filp)
+{
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
+ tty_port_shutdown(port);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
+}
+EXPORT_SYMBOL(tty_port_close);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index fc4b68a..c078d99 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -94,8 +94,6 @@ static int i915_resume(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;

- pci_set_power_state(dev->pdev, PCI_D0);
- pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
pci_set_master(dev->pdev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 80e5ba4..2b7aeee 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1151,27 +1151,21 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
mutex_lock(&dev->struct_mutex);
if (!obj_priv->gtt_space) {
ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
-
- ret = i915_gem_object_set_to_gtt_domain(obj, write);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ if (ret)
+ goto unlock;

list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret)
+ goto unlock;
}

/* Need a new fence register? */
if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ if (ret)
+ goto unlock;
}

pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) +
@@ -1179,18 +1173,18 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)

/* Finally, remap it using the new GTT offset */
ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
-
+unlock:
mutex_unlock(&dev->struct_mutex);

switch (ret) {
+ case 0:
+ case -ERESTARTSYS:
+ return VM_FAULT_NOPAGE;
case -ENOMEM:
case -EAGAIN:
return VM_FAULT_OOM;
- case -EFAULT:
- case -EINVAL:
- return VM_FAULT_SIGBUS;
default:
- return VM_FAULT_NOPAGE;
+ return VM_FAULT_SIGBUS;
}
}

@@ -2506,16 +2500,6 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
if (obj_priv->pages == NULL)
return;

- /* XXX: The 865 in particular appears to be weird in how it handles
- * cache flushing. We haven't figured it out, but the
- * clflush+agp_chipset_flush doesn't appear to successfully get the
- * data visible to the PGU, while wbinvd + agp_chipset_flush does.
- */
- if (IS_I865G(obj->dev)) {
- wbinvd();
- return;
- }
-
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}

@@ -3007,6 +2991,16 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
return -EINVAL;
}

+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta, (int) target_obj->size);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+
if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
reloc->read_domains & I915_GEM_DOMAIN_CPU) {
DRM_ERROR("reloc with read/write CPU domains: "
@@ -3837,7 +3831,8 @@ void i915_gem_free_object(struct drm_gem_object *obj)

i915_gem_object_unbind(obj);

- i915_gem_free_mmap_offset(obj);
+ if (obj_priv->mmap_offset)
+ i915_gem_free_mmap_offset(obj);

kfree(obj_priv->page_cpu_valid);
kfree(obj_priv->bit_17);
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index a2d527b..e774a4a 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -234,7 +234,13 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
bool need_disable;

- if (!IS_I9XX(dev)) {
+ if (IS_IGDNG(dev)) {
+ /* On IGDNG whatever DRAM config, GPU always do
+ * same swizzling setup.
+ */
+ swizzle_x = I915_BIT_6_SWIZZLE_9_10;
+ swizzle_y = I915_BIT_6_SWIZZLE_9;
+ } else if (!IS_I9XX(dev)) {
/* As far as we know, the 865 doesn't have these bit 6
* swizzling issues.
*/
@@ -317,13 +323,6 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev)
}
}

- /* FIXME: check with memory config on IGDNG */
- if (IS_IGDNG(dev)) {
- DRM_ERROR("disable tiling on IGDNG...\n");
- swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
- swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
- }
-
dev_priv->mm.bit_6_swizzle_x = swizzle_x;
dev_priv->mm.bit_6_swizzle_y = swizzle_y;
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2955083..106a1ae 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1733,6 +1733,7 @@
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* IGDNG */
#define DISPPLANE_TILED (1<<10)
#define DSPAADDR 0x70184
#define DSPASTRIDE 0x70188
@@ -1867,6 +1868,8 @@
#define PF_ENABLE (1<<31)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
+#define PFA_WIN_POS 0x68070
+#define PFB_WIN_POS 0x68870

/* legacy palette */
#define LGC_PALETTE_A 0x4a000
@@ -1913,6 +1916,9 @@
#define GTIIR 0x44018
#define GTIER 0x4401c

+#define DISP_ARB_CTL 0x45000
+#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
+
/* PCH */

/* south display engine interrupt */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index f806fcc..698a0ed 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -217,6 +217,9 @@ parse_general_features(struct drm_i915_private *dev_priv,
if (IS_I85X(dev_priv->dev))
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 66 : 48;
+ else if (IS_IGDNG(dev_priv->dev))
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 100 : 120;
else
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 100 : 96;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 590f81c..5ae4c1a 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -151,13 +151,10 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;

- temp = adpa = I915_READ(PCH_ADPA);
-
- adpa &= ~ADPA_DAC_ENABLE;
- I915_WRITE(PCH_ADPA, adpa);
+ adpa = I915_READ(PCH_ADPA);

adpa &= ~ADPA_CRT_HOTPLUG_MASK;

@@ -184,8 +181,6 @@ static bool intel_igdng_crt_detect_hotplug(struct drm_connector *connector)
else
ret = false;

- /* restore origin register */
- I915_WRITE(PCH_ADPA, temp);
return ret;
}

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 748ed50..8b5af29 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -818,7 +818,7 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
refclk, best_clock);

if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
@@ -1008,6 +1008,10 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
dspcntr &= ~DISPPLANE_TILED;
}

+ if (IS_IGDNG(dev))
+ /* must disable */
+ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+
I915_WRITE(dspcntr_reg, dspcntr);

Start = obj_priv->gtt_offset;
@@ -1154,6 +1158,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
+ int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -1205,6 +1210,19 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
}
}

+ /* Enable panel fitting for LVDS */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ temp = I915_READ(pf_ctl_reg);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE);
+
+ /* currently full aspect */
+ I915_WRITE(pf_win_pos, 0);
+
+ I915_WRITE(pf_win_size,
+ (dev_priv->panel_fixed_mode->hdisplay << 16) |
+ (dev_priv->panel_fixed_mode->vdisplay));
+ }
+
/* Enable CPU pipe */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) == 0) {
@@ -1858,7 +1876,14 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
{
long entries_required, wm_size;

- entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
+ 1000;
entries_required /= wm->cacheline_size;

DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
@@ -2616,6 +2641,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,

intel_wait_for_vblank(dev);

+ if (IS_IGDNG(dev)) {
+ /* enable address swizzle for tiling buffer */
+ temp = I915_READ(DISP_ARB_CTL);
+ I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
+ }
+
I915_WRITE(dspcntr_reg, dspcntr);

/* Flush the plane changes */
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 8df02ef..b7d091b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -305,6 +305,10 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
goto out;
}

+ /* full screen scale for now */
+ if (IS_IGDNG(dev))
+ goto out;
+
/* 965+ wants fuzzy fitting */
if (IS_I965G(dev))
pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
@@ -332,8 +336,10 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
* to register description and PRM.
* Change the value here to see the borders for debugging
*/
- I915_WRITE(BCLRPAT_A, 0);
- I915_WRITE(BCLRPAT_B, 0);
+ if (!IS_IGDNG(dev)) {
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+ }

switch (lvds_priv->fitting_mode) {
case DRM_MODE_SCALE_NO_SCALE:
@@ -582,7 +588,6 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
* settings.
*/

- /* No panel fitting yet, fixme */
if (IS_IGDNG(dev))
return;

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d3b74ba..66dc1a5 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -114,6 +114,9 @@ struct intel_sdvo_priv {
/* DDC bus used by this SDVO output */
uint8_t ddc_bus;

+ /* Mac mini hack -- use the same DDC as the analog connector */
+ struct i2c_adapter *analog_ddc_bus;
+
int save_sdvo_mult;
u16 save_active_outputs;
struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
@@ -1478,6 +1481,36 @@ intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
return (caps > 1);
}

+static struct drm_connector *
+intel_find_analog_connector(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ intel_output = to_intel_output(connector);
+ if (intel_output->type == INTEL_OUTPUT_ANALOG)
+ return connector;
+ }
+ return NULL;
+}
+
+static int
+intel_analog_is_connected(struct drm_device *dev)
+{
+ struct drm_connector *analog_connector;
+ analog_connector = intel_find_analog_connector(dev);
+
+ if (!analog_connector)
+ return false;
+
+ if (analog_connector->funcs->detect(analog_connector) ==
+ connector_status_disconnected)
+ return false;
+
+ return true;
+}
+
enum drm_connector_status
intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
{
@@ -1488,6 +1521,15 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)

edid = drm_get_edid(&intel_output->base,
intel_output->ddc_bus);
+
+ /* when there is no edid and no monitor is connected with VGA
+ * port, try to use the CRT ddc to read the EDID for DVI-connector
+ */
+ if (edid == NULL &&
+ sdvo_priv->analog_ddc_bus &&
+ !intel_analog_is_connected(intel_output->base.dev))
+ edid = drm_get_edid(&intel_output->base,
+ sdvo_priv->analog_ddc_bus);
if (edid != NULL) {
/* Don't report the output as connected if it's a DVI-I
* connector with a non-digital EDID coming out.
@@ -1540,31 +1582,32 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ int num_modes;

/* set the bus switch and get the modes */
- intel_ddc_get_modes(intel_output);
+ num_modes = intel_ddc_get_modes(intel_output);

-#if 0
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- /* Mac mini hack. On this device, I get DDC through the analog, which
- * load-detects as disconnected. I fail to DDC through the SDVO DDC,
- * but it does load-detect as connected. So, just steal the DDC bits
- * from analog when we fail at finding it the right way.
+ /*
+ * Mac mini hack. On this device, the DVI-I connector shares one DDC
+ * link between analog and digital outputs. So, if the regular SDVO
+ * DDC fails, check to see if the analog output is disconnected, in
+ * which case we'll look there for the digital DDC data.
*/
- crt = xf86_config->output[0];
- intel_output = crt->driver_private;
- if (intel_output->type == I830_OUTPUT_ANALOG &&
- crt->funcs->detect(crt) == XF86OutputStatusDisconnected) {
- I830I2CInit(pScrn, &intel_output->pDDCBus, GPIOA, "CRTDDC_A");
- edid_mon = xf86OutputGetEDID(crt, intel_output->pDDCBus);
- xf86DestroyI2CBusRec(intel_output->pDDCBus, true, true);
- }
- if (edid_mon) {
- xf86OutputSetEDID(output, edid_mon);
- modes = xf86OutputGetEDIDModes(output);
+ if (num_modes == 0 &&
+ sdvo_priv->analog_ddc_bus &&
+ !intel_analog_is_connected(intel_output->base.dev)) {
+ struct i2c_adapter *digital_ddc_bus;
+
+ /* Switch to the analog ddc bus and try that
+ */
+ digital_ddc_bus = intel_output->ddc_bus;
+ intel_output->ddc_bus = sdvo_priv->analog_ddc_bus;
+
+ (void) intel_ddc_get_modes(intel_output);
+
+ intel_output->ddc_bus = digital_ddc_bus;
}
-#endif
}

/**
@@ -1748,6 +1791,8 @@ static void intel_sdvo_destroy(struct drm_connector *connector)
intel_i2c_destroy(intel_output->i2c_bus);
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (sdvo_priv->analog_ddc_bus)
+ intel_i2c_destroy(sdvo_priv->analog_ddc_bus);

if (sdvo_priv->sdvo_lvds_fixed_mode != NULL)
drm_mode_destroy(connector->dev,
@@ -2074,10 +2119,15 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
}

/* setup the DDC bus. */
- if (output_device == SDVOB)
+ if (output_device == SDVOB) {
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
- else
+ sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
+ "SDVOB/VGA DDC BUS");
+ } else {
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+ sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
+ "SDVOC/VGA DDC BUS");
+ }

if (intel_output->ddc_bus == NULL)
goto err_i2c;
@@ -2143,6 +2193,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device)
return true;

err_i2c:
+ if (sdvo_priv->analog_ddc_bus != NULL)
+ intel_i2c_destroy(sdvo_priv->analog_ddc_bus);
if (intel_output->ddc_bus != NULL)
intel_i2c_destroy(intel_output->ddc_bus);
if (intel_output->i2c_bus != NULL)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5eb10c2..047844d 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1319,7 +1319,6 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },

- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ }
};
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 8ff7e35..f33ac27 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,33 +408,28 @@ static int if_write_room(struct tty_struct *tty)
return retval;
}

-/* FIXME: This function does not have error returns */
-
static int if_chars_in_buffer(struct tty_struct *tty)
{
struct cardstate *cs;
- int retval = -ENODEV;
+ int retval = 0;

cs = (struct cardstate *) tty->driver_data;
if (!cs) {
pr_err("%s: no cardstate\n", __func__);
- return -ENODEV;
+ return 0;
}

gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);

- if (mutex_lock_interruptible(&cs->mutex))
- return -ERESTARTSYS; // FIXME -EINTR?
+ mutex_lock(&cs->mutex);

- if (!cs->connected) {
+ if (!cs->connected)
gig_dbg(DEBUG_IF, "not connected");
- retval = -ENODEV;
- } else if (!cs->open_count)
+ else if (!cs->open_count)
dev_warn(cs->dev, "%s: device not opened\n", __func__);
- else if (cs->mstate != MS_LOCKED) {
+ else if (cs->mstate != MS_LOCKED)
dev_warn(cs->dev, "can't write to unlocked device\n");
- retval = -EBUSY;
- } else
+ else
retval = cs->ops->chars_in_buffer(cs);

mutex_unlock(&cs->mutex);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 1c2e544..ffe9306 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2170,8 +2170,6 @@ static int em28xx_hint_board(struct em28xx *dev)
/* ----------------------------------------------------------------------- */
void em28xx_register_i2c_ir(struct em28xx *dev)
{
- struct i2c_board_info info;
- struct IR_i2c_init_data init_data;
const unsigned short addr_list[] = {
0x30, 0x47, I2C_CLIENT_END
};
@@ -2179,9 +2177,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
if (disable_ir)
return;

- memset(&info, 0, sizeof(struct i2c_board_info));
- memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ memset(&dev->info, 0, sizeof(&dev->info));
+ memset(&dev->init_data, 0, sizeof(dev->init_data));
+ strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);

/* detect & configure */
switch (dev->model) {
@@ -2191,19 +2189,19 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
break;
case (EM2800_BOARD_TERRATEC_CINERGY_200):
case (EM2820_BOARD_TERRATEC_CINERGY_250):
- init_data.ir_codes = ir_codes_em_terratec;
- init_data.get_key = em28xx_get_key_terratec;
- init_data.name = "i2c IR (EM28XX Terratec)";
+ dev->init_data.ir_codes = ir_codes_em_terratec;
+ dev->init_data.get_key = em28xx_get_key_terratec;
+ dev->init_data.name = "i2c IR (EM28XX Terratec)";
break;
case (EM2820_BOARD_PINNACLE_USB_2):
- init_data.ir_codes = ir_codes_pinnacle_grey;
- init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
- init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
+ dev->init_data.ir_codes = ir_codes_pinnacle_grey;
+ dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
+ dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
break;
case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
- init_data.ir_codes = ir_codes_hauppauge_new;
- init_data.get_key = em28xx_get_key_em_haup;
- init_data.name = "i2c IR (EM2840 Hauppauge)";
+ dev->init_data.ir_codes = ir_codes_hauppauge_new;
+ dev->init_data.get_key = em28xx_get_key_em_haup;
+ dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
break;
case (EM2820_BOARD_MSI_VOX_USB_2):
break;
@@ -2215,9 +2213,9 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
break;
}

- if (init_data.name)
- info.platform_data = &init_data;
- i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+ if (dev->init_data.name)
+ dev->info.platform_data = &dev->init_data;
+ i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
}

void em28xx_card_setup(struct em28xx *dev)
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index a2add61..cb2a70a 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -595,6 +595,10 @@ struct em28xx {
struct delayed_work sbutton_query_work;

struct em28xx_dvb *dvb;
+
+ /* I2C keyboard data */
+ struct i2c_board_info info;
+ struct IR_i2c_init_data init_data;
};

struct em28xx_ops {
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 6e219c2..69e48ce 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -684,8 +684,6 @@ void saa7134_input_fini(struct saa7134_dev *dev)

void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
{
- struct i2c_board_info info;
- struct IR_i2c_init_data init_data;
const unsigned short addr_list[] = {
0x7a, 0x47, 0x71, 0x2d,
I2C_CLIENT_END
@@ -705,32 +703,32 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
return;
}

- memset(&info, 0, sizeof(struct i2c_board_info));
- memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ memset(&dev->info, 0, sizeof(dev->info));
+ memset(&dev->init_data, 0, sizeof(dev->init_data));
+ strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);

switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
case SAA7134_BOARD_PINNACLE_PCTV_310i:
- init_data.name = "Pinnacle PCTV";
+ dev->init_data.name = "Pinnacle PCTV";
if (pinnacle_remote == 0) {
- init_data.get_key = get_key_pinnacle_color;
- init_data.ir_codes = ir_codes_pinnacle_color;
+ dev->init_data.get_key = get_key_pinnacle_color;
+ dev->init_data.ir_codes = ir_codes_pinnacle_color;
} else {
- init_data.get_key = get_key_pinnacle_grey;
- init_data.ir_codes = ir_codes_pinnacle_grey;
+ dev->init_data.get_key = get_key_pinnacle_grey;
+ dev->init_data.ir_codes = ir_codes_pinnacle_grey;
}
break;
case SAA7134_BOARD_UPMOST_PURPLE_TV:
- init_data.name = "Purple TV";
- init_data.get_key = get_key_purpletv;
- init_data.ir_codes = ir_codes_purpletv;
+ dev->init_data.name = "Purple TV";
+ dev->init_data.get_key = get_key_purpletv;
+ dev->init_data.ir_codes = ir_codes_purpletv;
break;
case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
- init_data.name = "MSI TV@nywhere Plus";
- init_data.get_key = get_key_msi_tvanywhere_plus;
- init_data.ir_codes = ir_codes_msi_tvanywhere_plus;
- info.addr = 0x30;
+ dev->init_data.name = "MSI TV@nywhere Plus";
+ dev->init_data.get_key = get_key_msi_tvanywhere_plus;
+ dev->init_data.ir_codes = ir_codes_msi_tvanywhere_plus;
+ dev->info.addr = 0x30;
/* MSI TV@nywhere Plus controller doesn't seem to
respond to probes unless we read something from
an existing device. Weird...
@@ -741,9 +739,9 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
(1 == rc) ? "yes" : "no");
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- init_data.name = "HVR 1110";
- init_data.get_key = get_key_hvr1110;
- init_data.ir_codes = ir_codes_hauppauge_new;
+ dev->init_data.name = "HVR 1110";
+ dev->init_data.get_key = get_key_hvr1110;
+ dev->init_data.ir_codes = ir_codes_hauppauge_new;
break;
case SAA7134_BOARD_BEHOLD_607FM_MK3:
case SAA7134_BOARD_BEHOLD_607FM_MK5:
@@ -757,26 +755,26 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
case SAA7134_BOARD_BEHOLD_M63:
case SAA7134_BOARD_BEHOLD_M6_EXTRA:
case SAA7134_BOARD_BEHOLD_H6:
- init_data.name = "BeholdTV";
- init_data.get_key = get_key_beholdm6xx;
- init_data.ir_codes = ir_codes_behold;
+ dev->init_data.name = "BeholdTV";
+ dev->init_data.get_key = get_key_beholdm6xx;
+ dev->init_data.ir_codes = ir_codes_behold;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
- info.addr = 0x40;
+ dev->info.addr = 0x40;
break;
}

- if (init_data.name)
- info.platform_data = &init_data;
+ if (dev->init_data.name)
+ dev->info.platform_data = &dev->init_data;
/* No need to probe if address is known */
- if (info.addr) {
- i2c_new_device(&dev->i2c_adap, &info);
+ if (dev->info.addr) {
+ i2c_new_device(&dev->i2c_adap, &dev->info);
return;
}

/* Address not known, fallback to probing */
- i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
+ i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
}

static int saa7134_rc5_irq(struct saa7134_dev *dev)
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index fb564f1..4d85f5c 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -584,6 +584,10 @@ struct saa7134_dev {
int nosignal;
unsigned int insuspend;

+ /* I2C keyboard data */
+ struct i2c_board_info info;
+ struct IR_i2c_init_data init_data;
+
/* SAA7134_MPEG_* */
struct saa7134_ts ts;
struct saa7134_dmaqueue ts_q;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d0ba4f..9ad7bb4 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1015,9 +1015,9 @@ mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
{
SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
pSge->Address.Low = cpu_to_le32
- (lower_32_bits((unsigned long)(dma_addr)));
+ (lower_32_bits(dma_addr));
pSge->Address.High = cpu_to_le32
- (upper_32_bits((unsigned long)dma_addr));
+ (upper_32_bits(dma_addr));
pSge->FlagsLength = cpu_to_le32
((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
}
@@ -1038,8 +1038,8 @@ mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
u32 tmp;

pSge->Address.Low = cpu_to_le32
- (lower_32_bits((unsigned long)(dma_addr)));
- tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+ (lower_32_bits(dma_addr));
+ tmp = (u32)(upper_32_bits(dma_addr));

/*
* 1078 errata workaround for the 36GB limitation
@@ -1101,7 +1101,7 @@ mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
pChain->NextChainOffset = next;

pChain->Address.Low = cpu_to_le32(tmp);
- tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+ tmp = (u32)(upper_32_bits(dma_addr));
pChain->Address.High = cpu_to_le32(tmp);
}

diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 13e7d7b..dd8b6b3 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -643,7 +643,7 @@ struct ab3100_init_setting {
u8 setting;
};

-static const struct ab3100_init_setting __initdata
+static const struct ab3100_init_setting __initconst
ab3100_init_settings[] = {
{
.abreg = AB3100_MCA,
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 06084db..72f2df1 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -180,11 +180,11 @@ static int mmc_read_ext_csd(struct mmc_card *card)

err = mmc_send_ext_csd(card, ext_csd);
if (err) {
- /*
- * We all hosts that cannot perform the command
- * to fail more gracefully
- */
- if (err != -EINVAL)
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
goto out;

/*
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index cd81c39..65c32bf 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -210,11 +210,11 @@ static int mmc_read_switch(struct mmc_card *card)

err = mmc_sd_switch(card, 0, 0, 1, status);
if (err) {
- /*
- * We all hosts that cannot perform the command
- * to fail more gracefully
- */
- if (err != -EINVAL)
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
goto out;

printk(KERN_WARNING "%s: problem reading switch "
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 61ea833..94bb61e 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
}
}

-static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param)
-{
- struct map_info *map = mtd->priv;
- struct cfi_private *cfi = map->fldrv_priv;
- if (cfi->cfiq->BufWriteTimeoutTyp) {
- pr_warning("Don't use write buffer on ST flash M29W128G\n");
- cfi->cfiq->BufWriteTimeoutTyp = 0;
- }
-}
-
static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
#ifdef AMD_BOOTLOC_BUG
@@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
- { CFI_MFR_ST, 0x227E, fixup_M29W128G_write_buffer, NULL, },
#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 34d40e2..c5a84fd 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
{
cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+ /* M29W128G flashes require an additional reset command
+ when exit qry mode */
+ if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
+ cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
}
EXPORT_SYMBOL_GPL(cfi_qry_mode_off);

diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 89bf85a..40b5658 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
wmb();
ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
/* The NDFC uses Smart Media (SMC) bytes order */
- ecc_code[0] = p[2];
- ecc_code[1] = p[1];
+ ecc_code[0] = p[1];
+ ecc_code[1] = p[2];
ecc_code[2] = p[3];

return 0;
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 3e164f0..62d6a78 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
const u32 *reg;
int len;

- /* check if this is a partition node */
- partname = of_get_property(pp, "name", &len);
- if (strcmp(partname, "partition") != 0) {
+ reg = of_get_property(pp, "reg", &len);
+ if (!reg) {
nr_parts--;
continue;
}

- reg = of_get_property(pp, "reg", &len);
- if (!reg || (len != 2 * sizeof(u32))) {
- of_node_put(pp);
- dev_err(dev, "Invalid 'reg' on %s\n", node->full_name);
- kfree(*pparts);
- *pparts = NULL;
- return -EINVAL;
- }
(*pparts)[i].offset = reg[0];
(*pparts)[i].size = reg[1];

@@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
i++;
}

+ if (!i) {
+ of_node_put(pp);
+ dev_err(dev, "No valid partition found on %s\n", node->full_name);
+ kfree(*pparts);
+ *pparts = NULL;
+ return -EINVAL;
+ }
+
return nr_parts;
}
EXPORT_SYMBOL(of_mtd_parse_partitions);
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index a10c1d7..460bb88 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -80,7 +80,7 @@ static void vcan_rx(struct sk_buff *skb, struct net_device *dev)
skb->dev = dev;
skb->ip_summed = CHECKSUM_UNNECESSARY;

- netif_rx(skb);
+ netif_rx_ni(skb);
}

static int vcan_tx(struct sk_buff *skb, struct net_device *dev)
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 1f9ec29..65a43c8 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -263,6 +263,7 @@ static int kaweth_control(struct kaweth_device *kaweth,
int timeout)
{
struct usb_ctrlrequest *dr;
+ int retval;

dbg("kaweth_control()");

@@ -278,18 +279,21 @@ static int kaweth_control(struct kaweth_device *kaweth,
return -ENOMEM;
}

- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(size);

- return kaweth_internal_control_msg(kaweth->dev,
- pipe,
- dr,
- data,
- size,
- timeout);
+ retval = kaweth_internal_control_msg(kaweth->dev,
+ pipe,
+ dr,
+ data,
+ size,
+ timeout);
+
+ kfree(dr);
+ return retval;
}

/****************************************************************
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 007eb85..1084ca6 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -64,6 +64,8 @@ static struct usb_device_id ar9170_usb_ids[] = {
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* TP-Link TL-WN821N v2 */
+ { USB_DEVICE(0x0cf3, 0x1002) },
/* Cace Airpcap NX */
{ USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6358233..778baf7 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1164,6 +1164,7 @@ extern void ath5k_unregister_leds(struct ath5k_softc *sc);

/* Reset Functions */
extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
+extern int ath5k_hw_on_hold(struct ath5k_hw *ah);
extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
/* Power management functions */
extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index c41ef58..605b8f6 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -145,7 +145,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
goto err_free;

/* Bring device out of sleep and reset it's units */
- ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+ ret = ath5k_hw_nic_wakeup(ah, 0, true);
if (ret)
goto err_free;

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ba6d225..753f50e 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -666,7 +666,6 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)

ath5k_led_off(sc);

- free_irq(pdev->irq, sc);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@@ -694,18 +693,8 @@ ath5k_pci_resume(struct pci_dev *pdev)
*/
pci_write_config_byte(pdev, 0x41, 0);

- err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
- if (err) {
- ATH5K_ERR(sc, "request_irq failed\n");
- goto err_no_irq;
- }
-
ath5k_led_enable(sc);
return 0;
-
-err_no_irq:
- pci_disable_device(pdev);
- return err;
}
#endif /* CONFIG_PM */

@@ -2445,27 +2434,29 @@ ath5k_stop_hw(struct ath5k_softc *sc)
ret = ath5k_stop_locked(sc);
if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
/*
- * Set the chip in full sleep mode. Note that we are
- * careful to do this only when bringing the interface
- * completely to a stop. When the chip is in this state
- * it must be carefully woken up or references to
- * registers in the PCI clock domain may freeze the bus
- * (and system). This varies by chip and is mostly an
- * issue with newer parts that go to sleep more quickly.
- */
- if (sc->ah->ah_mac_srev >= 0x78) {
- /*
- * XXX
- * don't put newer MAC revisions > 7.8 to sleep because
- * of the above mentioned problems
- */
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
- "not putting device to sleep\n");
- } else {
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
- "putting device to full sleep\n");
- ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
- }
+ * Don't set the card in full sleep mode!
+ *
+ * a) When the device is in this state it must be carefully
+ * woken up or references to registers in the PCI clock
+ * domain may freeze the bus (and system). This varies
+ * by chip and is mostly an issue with newer parts
+ * (madwifi sources mentioned srev >= 0x78) that go to
+ * sleep more quickly.
+ *
+ * b) On older chips full sleep results a weird behaviour
+ * during wakeup. I tested various cards with srev < 0x78
+ * and they don't wake up after module reload, a second
+ * module reload is needed to bring the card up again.
+ *
+ * Until we figure out what's going on don't enable
+ * full chip reset on any chip (this is what Legacy HAL
+ * and Sam's HAL do anyway). Instead Perform a full reset
+ * on the device (same as initial state after attach) and
+ * leave it idle (keep MAC/BB on warm reset) */
+ ret = ath5k_hw_on_hold(sc->ah);
+
+ ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
+ "putting device to sleep\n");
}
ath5k_txbuf_free(sc, sc->bbuf);

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index bd0a97a..4980621 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -258,29 +258,35 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
if (!set_chip)
goto commit;

- /* Preserve sleep duration */
data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+
+ /* If card is down we 'll get 0xffff... so we
+ * need to clean this up before we write the register
+ */
if (data & 0xffc00000)
data = 0;
else
- data = data & 0xfffcffff;
+ /* Preserve sleep duration etc */
+ data = data & ~AR5K_SLEEP_CTL_SLE;

- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
udelay(15);

- for (i = 50; i > 0; i--) {
+ for (i = 200; i > 0; i--) {
/* Check if the chip did wake up */
if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
AR5K_PCICFG_SPWR_DN) == 0)
break;

/* Wait a bit and retry */
- udelay(200);
- ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+ udelay(50);
+ ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
+ AR5K_SLEEP_CTL);
}

/* Fail if the chip didn't wake up */
- if (i <= 0)
+ if (i == 0)
return -EIO;

break;
@@ -297,6 +303,64 @@ commit:
}

/*
+ * Put device on hold
+ *
+ * Put MAC and Baseband on warm reset and
+ * keep that state (don't clean sleep control
+ * register). After this MAC and Baseband are
+ * disabled and a full reset is needed to come
+ * back. This way we save as much power as possible
+ * without puting the card on full sleep.
+ */
+int ath5k_hw_on_hold(struct ath5k_hw *ah)
+{
+ struct pci_dev *pdev = ah->ah_sc->pdev;
+ u32 bus_flags;
+ int ret;
+
+ /* Make sure device is awake */
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+ return ret;
+ }
+
+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: puting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ingore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to put device on warm reset\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to put device on hold\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+/*
* Bring up MAC + PHY Chips and program PLL
* TODO: Half/Quarter rate support
*/
@@ -319,6 +383,50 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
return ret;
}

+ /*
+ * Put chipset on warm reset...
+ *
+ * Note: puting PCI core on warm reset on PCI-E cards
+ * results card to hang and always return 0xffff... so
+ * we ingore that flag for PCI-E cards. On PCI cards
+ * this flag gets cleared after 64 PCI clocks.
+ */
+ bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+ if (ah->ah_version == AR5K_AR5210) {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
+ AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
+ mdelay(2);
+ } else {
+ ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+ AR5K_RESET_CTL_BASEBAND | bus_flags);
+ }
+
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* ...wakeup again!...*/
+ ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ if (ret) {
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+ return ret;
+ }
+
+ /* ...clear reset control register and pull device out of
+ * warm reset */
+ if (ath5k_hw_nic_reset(ah, 0)) {
+ ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+ return -EIO;
+ }
+
+ /* On initialization skip PLL programming since we don't have
+ * a channel / mode set yet */
+ if (initial)
+ return 0;
+
if (ah->ah_version != AR5K_AR5210) {
/*
* Get channel mode flags
@@ -384,39 +492,6 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
AR5K_PHY_TURBO);
}

- /* reseting PCI on PCI-E cards results card to hang
- * and always return 0xffff... so we ingore that flag
- * for PCI-E cards */
- bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
- /* Reset chipset */
- if (ah->ah_version == AR5K_AR5210) {
- ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
- AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
- AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
- mdelay(2);
- } else {
- ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
- AR5K_RESET_CTL_BASEBAND | bus_flags);
- }
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
- return -EIO;
- }
-
- /* ...wakeup again!*/
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
- if (ret) {
- ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
- return ret;
- }
-
- /* ...final warm reset */
- if (ath5k_hw_nic_reset(ah, 0)) {
- ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
- return -EIO;
- }
-
if (ah->ah_version != AR5K_AR5210) {

/* ...update PLL if needed */
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 7da52f1..d83d430 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -46,7 +46,7 @@
#include "iwl-5000-hw.h"

/* Highest firmware API version supported */
-#define IWL1000_UCODE_API_MAX 2
+#define IWL1000_UCODE_API_MAX 3

/* Lowest firmware API version supported */
#define IWL1000_UCODE_API_MIN 1
@@ -62,12 +62,14 @@ struct iwl_cfg iwl1000_bgn_cfg = {
.ucode_api_min = IWL1000_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.ops = &iwl5000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .max_ll_items = OTP_MAX_LL_ITEMS_1000,
+ .shadow_ram_support = false,
};

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 46288e7..b73ab6c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2784,11 +2784,50 @@ static int iwl3945_load_bsm(struct iwl_priv *priv)
return 0;
}

+#define IWL3945_UCODE_GET(item) \
+static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ return le32_to_cpu(ucode->u.v1.item); \
+}
+
+static u32 iwl3945_ucode_get_header_size(u32 api_ver)
+{
+ return UCODE_HEADER_SIZE(1);
+}
+static u32 iwl3945_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return 0;
+}
+static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return (u8 *) ucode->u.v1.data;
+}
+
+IWL3945_UCODE_GET(inst_size);
+IWL3945_UCODE_GET(data_size);
+IWL3945_UCODE_GET(init_size);
+IWL3945_UCODE_GET(init_data_size);
+IWL3945_UCODE_GET(boot_size);
+
static struct iwl_hcmd_ops iwl3945_hcmd = {
.rxon_assoc = iwl3945_send_rxon_assoc,
.commit_rxon = iwl3945_commit_rxon,
};

+static struct iwl_ucode_ops iwl3945_ucode = {
+ .get_header_size = iwl3945_ucode_get_header_size,
+ .get_build = iwl3945_ucode_get_build,
+ .get_inst_size = iwl3945_ucode_get_inst_size,
+ .get_data_size = iwl3945_ucode_get_data_size,
+ .get_init_size = iwl3945_ucode_get_init_size,
+ .get_init_data_size = iwl3945_ucode_get_init_data_size,
+ .get_boot_size = iwl3945_ucode_get_boot_size,
+ .get_data = iwl3945_ucode_get_data,
+};
+
static struct iwl_lib_ops iwl3945_lib = {
.txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl3945_hw_txq_free_tfd,
@@ -2829,6 +2868,7 @@ static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
};

static struct iwl_ops iwl3945_ops = {
+ .ucode = &iwl3945_ucode,
.lib = &iwl3945_lib,
.hcmd = &iwl3945_hcmd,
.utils = &iwl3945_hcmd_utils,
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 8f3d4bc..157ee15 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2221,12 +2221,50 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
cancel_work_sync(&priv->txpower_work);
}

+#define IWL4965_UCODE_GET(item) \
+static u32 iwl4965_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ return le32_to_cpu(ucode->u.v1.item); \
+}
+
+static u32 iwl4965_ucode_get_header_size(u32 api_ver)
+{
+ return UCODE_HEADER_SIZE(1);
+}
+static u32 iwl4965_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return 0;
+}
+static u8 *iwl4965_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ return (u8 *) ucode->u.v1.data;
+}
+
+IWL4965_UCODE_GET(inst_size);
+IWL4965_UCODE_GET(data_size);
+IWL4965_UCODE_GET(init_size);
+IWL4965_UCODE_GET(init_data_size);
+IWL4965_UCODE_GET(boot_size);
+
static struct iwl_hcmd_ops iwl4965_hcmd = {
.rxon_assoc = iwl4965_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
};

+static struct iwl_ucode_ops iwl4965_ucode = {
+ .get_header_size = iwl4965_ucode_get_header_size,
+ .get_build = iwl4965_ucode_get_build,
+ .get_inst_size = iwl4965_ucode_get_inst_size,
+ .get_data_size = iwl4965_ucode_get_data_size,
+ .get_init_size = iwl4965_ucode_get_init_size,
+ .get_init_data_size = iwl4965_ucode_get_init_data_size,
+ .get_boot_size = iwl4965_ucode_get_boot_size,
+ .get_data = iwl4965_ucode_get_data,
+};
static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
.get_hcmd_size = iwl4965_get_hcmd_size,
.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
@@ -2287,6 +2325,7 @@ static struct iwl_lib_ops iwl4965_lib = {
};

static struct iwl_ops iwl4965_ops = {
+ .ucode = &iwl4965_ucode,
.lib = &iwl4965_lib,
.hcmd = &iwl4965_hcmd,
.utils = &iwl4965_hcmd_utils,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index b3c648c..a9ea3b5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -239,6 +239,13 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);

+ if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_1000) {
+ /* Setting digital SVR for 1000 card to 1.32V */
+ iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
+ APMG_SVR_DIGITAL_VOLTAGE_1_32,
+ ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+ }
+
spin_unlock_irqrestore(&priv->lock, flags);
}

@@ -1426,6 +1433,44 @@ int iwl5000_calc_rssi(struct iwl_priv *priv,
return max_rssi - agc - IWL49_RSSI_OFFSET;
}

+#define IWL5000_UCODE_GET(item) \
+static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\
+ u32 api_ver) \
+{ \
+ if (api_ver <= 2) \
+ return le32_to_cpu(ucode->u.v1.item); \
+ return le32_to_cpu(ucode->u.v2.item); \
+}
+
+static u32 iwl5000_ucode_get_header_size(u32 api_ver)
+{
+ if (api_ver <= 2)
+ return UCODE_HEADER_SIZE(1);
+ return UCODE_HEADER_SIZE(2);
+}
+
+static u32 iwl5000_ucode_get_build(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ if (api_ver <= 2)
+ return 0;
+ return le32_to_cpu(ucode->u.v2.build);
+}
+
+static u8 *iwl5000_ucode_get_data(const struct iwl_ucode_header *ucode,
+ u32 api_ver)
+{
+ if (api_ver <= 2)
+ return (u8 *) ucode->u.v1.data;
+ return (u8 *) ucode->u.v2.data;
+}
+
+IWL5000_UCODE_GET(inst_size);
+IWL5000_UCODE_GET(data_size);
+IWL5000_UCODE_GET(init_size);
+IWL5000_UCODE_GET(init_data_size);
+IWL5000_UCODE_GET(boot_size);
+
struct iwl_hcmd_ops iwl5000_hcmd = {
.rxon_assoc = iwl5000_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
@@ -1441,6 +1486,17 @@ struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
.calc_rssi = iwl5000_calc_rssi,
};

+struct iwl_ucode_ops iwl5000_ucode = {
+ .get_header_size = iwl5000_ucode_get_header_size,
+ .get_build = iwl5000_ucode_get_build,
+ .get_inst_size = iwl5000_ucode_get_inst_size,
+ .get_data_size = iwl5000_ucode_get_data_size,
+ .get_init_size = iwl5000_ucode_get_init_size,
+ .get_init_data_size = iwl5000_ucode_get_init_data_size,
+ .get_boot_size = iwl5000_ucode_get_boot_size,
+ .get_data = iwl5000_ucode_get_data,
+};
+
struct iwl_lib_ops iwl5000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
@@ -1542,12 +1598,14 @@ static struct iwl_lib_ops iwl5150_lib = {
};

struct iwl_ops iwl5000_ops = {
+ .ucode = &iwl5000_ucode,
.lib = &iwl5000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
};

static struct iwl_ops iwl5150_ops = {
+ .ucode = &iwl5000_ucode,
.lib = &iwl5150_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index bd438d8..e4a405f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -46,8 +46,8 @@
#include "iwl-5000-hw.h"

/* Highest firmware API version supported */
-#define IWL6000_UCODE_API_MAX 2
-#define IWL6050_UCODE_API_MAX 2
+#define IWL6000_UCODE_API_MAX 3
+#define IWL6050_UCODE_API_MAX 3

/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 1
@@ -69,6 +69,7 @@ static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
};

static struct iwl_ops iwl6000_ops = {
+ .ucode = &iwl5000_ucode,
.lib = &iwl5000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl6000_hcmd_utils,
@@ -81,13 +82,15 @@ struct iwl_cfg iwl6000_2ag_cfg = {
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.need_pll_cfg = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
};

struct iwl_cfg iwl6000_2agn_cfg = {
@@ -97,13 +100,15 @@ struct iwl_cfg iwl6000_2agn_cfg = {
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
};

struct iwl_cfg iwl6050_2agn_cfg = {
@@ -113,13 +118,15 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
};

struct iwl_cfg iwl6000_3agn_cfg = {
@@ -129,13 +136,15 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
};

struct iwl_cfg iwl6050_3agn_cfg = {
@@ -145,13 +154,15 @@ struct iwl_cfg iwl6050_3agn_cfg = {
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.need_pll_cfg = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+ .shadow_ram_support = true,
};

MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 355f50e..2a577ae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1348,7 +1348,7 @@ static void iwl_nic_start(struct iwl_priv *priv)
*/
static int iwl_read_ucode(struct iwl_priv *priv)
{
- struct iwl_ucode *ucode;
+ struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
const char *name_pre = priv->cfg->fw_name_pre;
@@ -1357,7 +1357,8 @@ static int iwl_read_ucode(struct iwl_priv *priv)
char buf[25];
u8 *src;
size_t len;
- u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
+ u32 api_ver, build;
+ u32 inst_size, data_size, init_size, init_data_size, boot_size;

/* Ask kernel firmware_class module to get the boot firmware off disk.
* request_firmware() is synchronous, file is in memory on return. */
@@ -1387,23 +1388,26 @@ static int iwl_read_ucode(struct iwl_priv *priv)
if (ret < 0)
goto error;

- /* Make sure that we got at least our header! */
- if (ucode_raw->size < sizeof(*ucode)) {
+ /* Make sure that we got at least the v1 header! */
+ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}

/* Data from ucode file: header followed by uCode images */
- ucode = (void *)ucode_raw->data;
+ ucode = (struct iwl_ucode_header *)ucode_raw->data;

priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = le32_to_cpu(ucode->inst_size);
- data_size = le32_to_cpu(ucode->data_size);
- init_size = le32_to_cpu(ucode->init_size);
- init_data_size = le32_to_cpu(ucode->init_data_size);
- boot_size = le32_to_cpu(ucode->boot_size);
+ build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
+ inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
+ data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
+ init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
+ init_data_size =
+ priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
+ boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
+ src = priv->cfg->ops->ucode->get_data(ucode, api_ver);

/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
@@ -1429,6 +1433,9 @@ static int iwl_read_ucode(struct iwl_priv *priv)
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver));

+ if (build)
+ IWL_DEBUG_INFO(priv, "Build %u\n", build);
+
IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
priv->ucode_ver);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
@@ -1443,12 +1450,14 @@ static int iwl_read_ucode(struct iwl_priv *priv)
boot_size);

/* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size < sizeof(*ucode) +
+ if (ucode_raw->size !=
+ priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {

- IWL_DEBUG_INFO(priv, "uCode file size %d too small\n",
- (int)ucode_raw->size);
+ IWL_DEBUG_INFO(priv,
+ "uCode file size %d does not match expected size\n",
+ (int)ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
@@ -1528,42 +1537,42 @@ static int iwl_read_ucode(struct iwl_priv *priv)
/* Copy images into buffers for card's bus-master reads ... */

/* Runtime instructions (first block of data in file) */
- src = &ucode->data[0];
- len = priv->ucode_code.len;
+ len = inst_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
+ src += len;
+
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);

/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl_up() */
- src = &ucode->data[inst_size];
- len = priv->ucode_data.len;
+ len = data_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
+ src += len;

/* Initialization instructions (3rd block) */
if (init_size) {
- src = &ucode->data[inst_size + data_size];
- len = priv->ucode_init.len;
+ len = init_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
len);
memcpy(priv->ucode_init.v_addr, src, len);
+ src += len;
}

/* Initialization data (4th block) */
if (init_data_size) {
- src = &ucode->data[inst_size + data_size + init_size];
- len = priv->ucode_init_data.len;
+ len = init_data_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
len);
memcpy(priv->ucode_init_data.v_addr, src, len);
+ src += len;
}

/* Bootstrap instructions (5th block) */
- src = &ucode->data[inst_size + data_size + init_size + init_data_size];
- len = priv->ucode_boot.len;
+ len = boot_size;
IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);

@@ -2206,7 +2215,7 @@ static void iwl_mac_stop(struct ieee80211_hw *hw)

priv->is_open = 0;

- if (iwl_is_ready_rf(priv)) {
+ if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
/* stop mac, cancel any scan request and clear
* RXON_FILTER_ASSOC_MSK BIT
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index dabf663..1e51891 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -116,6 +116,17 @@ struct iwl_temp_ops {
void (*set_ct_kill)(struct iwl_priv *priv);
};

+struct iwl_ucode_ops {
+ u32 (*get_header_size)(u32);
+ u32 (*get_build)(const struct iwl_ucode_header *, u32);
+ u32 (*get_inst_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_data_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_init_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_init_data_size)(const struct iwl_ucode_header *, u32);
+ u32 (*get_boot_size)(const struct iwl_ucode_header *, u32);
+ u8 * (*get_data)(const struct iwl_ucode_header *, u32);
+};
+
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
@@ -171,6 +182,7 @@ struct iwl_lib_ops {
};

struct iwl_ops {
+ const struct iwl_ucode_ops *ucode;
const struct iwl_lib_ops *lib;
const struct iwl_hcmd_ops *hcmd;
const struct iwl_hcmd_utils_ops *utils;
@@ -195,6 +207,8 @@ struct iwl_mod_params {
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @max_ll_items: max number of OTP blocks
+ * @shadow_ram_support: shadow support for OTP memory
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -231,6 +245,8 @@ struct iwl_cfg {
u8 valid_rx_ant;
bool need_pll_cfg;
bool use_isr_legacy;
+ const u16 max_ll_items;
+ const bool shadow_ram_support;
};

/***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 650e20a..e8c8607 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -66,6 +66,7 @@ extern struct iwl_cfg iwl1000_bgn_cfg;
/* shared structures from iwl-5000.c */
extern struct iwl_mod_params iwl50_mod_params;
extern struct iwl_ops iwl5000_ops;
+extern struct iwl_ucode_ops iwl5000_ucode;
extern struct iwl_lib_ops iwl5000_lib;
extern struct iwl_hcmd_ops iwl5000_hcmd;
extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
@@ -525,15 +526,29 @@ struct fw_desc {
};

/* uCode file layout */
-struct iwl_ucode {
- __le32 ver; /* major/minor/API/serial */
- __le32 inst_size; /* bytes of runtime instructions */
- __le32 data_size; /* bytes of runtime data */
- __le32 init_size; /* bytes of initialization instructions */
- __le32 init_data_size; /* bytes of initialization data */
- __le32 boot_size; /* bytes of bootstrap instructions */
- u8 data[0]; /* data in same order as "size" elements */
+struct iwl_ucode_header {
+ __le32 ver; /* major/minor/API/serial */
+ union {
+ struct {
+ __le32 inst_size; /* bytes of runtime code */
+ __le32 data_size; /* bytes of runtime data */
+ __le32 init_size; /* bytes of init code */
+ __le32 init_data_size; /* bytes of init data */
+ __le32 boot_size; /* bytes of bootstrap code */
+ u8 data[0]; /* in same order as sizes */
+ } v1;
+ struct {
+ __le32 build; /* build number */
+ __le32 inst_size; /* bytes of runtime code */
+ __le32 data_size; /* bytes of runtime data */
+ __le32 init_size; /* bytes of init code */
+ __le32 init_data_size; /* bytes of init data */
+ __le32 boot_size; /* bytes of bootstrap code */
+ u8 data[0]; /* in same order as sizes */
+ } v2;
+ } u;
};
+#define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)

struct iwl4965_ibss_seq {
u8 mac[ETH_ALEN];
@@ -820,6 +835,18 @@ enum iwl_nvm_type {
NVM_DEVICE_TYPE_OTP,
};

+/*
+ * Two types of OTP memory access modes
+ * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
+ * based on physical memory addressing
+ * IWL_OTP_ACCESS_RELATIVE - relative address mode,
+ * based on logical memory addressing
+ */
+enum iwl_access_mode {
+ IWL_OTP_ACCESS_ABSOLUTE,
+ IWL_OTP_ACCESS_RELATIVE,
+};
+
/* interrupt statistics */
struct isr_statistics {
u32 hw;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 7d7554a..e8c0e82 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -152,6 +152,19 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
}
EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);

+static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode)
+{
+ u32 otpgp;
+
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (mode == IWL_OTP_ACCESS_ABSOLUTE)
+ iwl_clear_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+ else
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+}
+
static int iwlcore_get_nvm_type(struct iwl_priv *priv)
{
u32 otpgp;
@@ -249,6 +262,124 @@ static int iwl_init_otp_access(struct iwl_priv *priv)
return ret;
}

+static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data)
+{
+ int ret = 0;
+ u32 r;
+ u32 otpgp;
+
+ _iwl_write32(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+ return ret;
+ }
+ r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
+ /* check for ECC errors: */
+ otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+ /* stop in this case */
+ /* set the uncorrectable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ IWL_ERR(priv, "Uncorrectable OTP ECC error, abort OTP read\n");
+ return -EINVAL;
+ }
+ if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+ /* continue in this case */
+ /* set the correctable OTP ECC bit for acknowledgement */
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+ IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
+ }
+ *eeprom_data = le16_to_cpu((__force __le16)(r >> 16));
+ return 0;
+}
+
+/*
+ * iwl_is_otp_empty: check for empty OTP
+ */
+static bool iwl_is_otp_empty(struct iwl_priv *priv)
+{
+ u16 next_link_addr = 0, link_value;
+ bool is_empty = false;
+
+ /* locate the beginning of OTP link list */
+ if (!iwl_read_otp_word(priv, next_link_addr, &link_value)) {
+ if (!link_value) {
+ IWL_ERR(priv, "OTP is empty\n");
+ is_empty = true;
+ }
+ } else {
+ IWL_ERR(priv, "Unable to read first block of OTP list.\n");
+ is_empty = true;
+ }
+
+ return is_empty;
+}
+
+
+/*
+ * iwl_find_otp_image: find EEPROM image in OTP
+ * finding the OTP block that contains the EEPROM image.
+ * the last valid block on the link list (the block _before_ the last block)
+ * is the block we should read and used to configure the device.
+ * If all the available OTP blocks are full, the last block will be the block
+ * we should read and used to configure the device.
+ * only perform this operation if shadow RAM is disabled
+ */
+static int iwl_find_otp_image(struct iwl_priv *priv,
+ u16 *validblockaddr)
+{
+ u16 next_link_addr = 0, link_value = 0, valid_addr;
+ int ret = 0;
+ int usedblocks = 0;
+
+ /* set addressing mode to absolute to traverse the link list */
+ iwl_set_otp_access(priv, IWL_OTP_ACCESS_ABSOLUTE);
+
+ /* checking for empty OTP or error */
+ if (iwl_is_otp_empty(priv))
+ return -EINVAL;
+
+ /*
+ * start traverse link list
+ * until reach the max number of OTP blocks
+ * different devices have different number of OTP blocks
+ */
+ do {
+ /* save current valid block address
+ * check for more block on the link list
+ */
+ valid_addr = next_link_addr;
+ next_link_addr = link_value;
+ IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+ usedblocks, next_link_addr);
+ if (iwl_read_otp_word(priv, next_link_addr, &link_value))
+ return -EINVAL;
+ if (!link_value) {
+ /*
+ * reach the end of link list,
+ * set address point to the starting address
+ * of the image
+ */
+ goto done;
+ }
+ /* more in the link list, continue */
+ usedblocks++;
+ } while (usedblocks < priv->cfg->max_ll_items);
+ /* OTP full, use last block */
+ IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
+done:
+ *validblockaddr = valid_addr;
+ /* skip first 2 bytes (link list pointer) */
+ *validblockaddr += 2;
+ return ret;
+}
+
/**
* iwl_eeprom_init - read EEPROM contents
*
@@ -263,14 +394,13 @@ int iwl_eeprom_init(struct iwl_priv *priv)
int sz;
int ret;
u16 addr;
- u32 otpgp;
+ u16 validblockaddr = 0;
+ u16 cache_addr = 0;

priv->nvm_device_type = iwlcore_get_nvm_type(priv);

/* allocate eeprom */
- if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- priv->cfg->eeprom_size =
- OTP_BLOCK_SIZE * OTP_LOWER_BLOCKS_TOTAL;
+ IWL_DEBUG_INFO(priv, "NVM size = %d\n", priv->cfg->eeprom_size);
sz = priv->cfg->eeprom_size;
priv->eeprom = kzalloc(sz, GFP_KERNEL);
if (!priv->eeprom) {
@@ -298,46 +428,31 @@ int iwl_eeprom_init(struct iwl_priv *priv)
if (ret) {
IWL_ERR(priv, "Failed to initialize OTP access.\n");
ret = -ENOENT;
- goto err;
+ goto done;
}
_iwl_write32(priv, CSR_EEPROM_GP,
iwl_read32(priv, CSR_EEPROM_GP) &
~CSR_EEPROM_GP_IF_OWNER_MSK);
- /* clear */
- _iwl_write32(priv, CSR_OTP_GP_REG,
- iwl_read32(priv, CSR_OTP_GP_REG) |
+
+ iwl_set_bit(priv, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
-
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
-
- _iwl_write32(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
- ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
+ /* traversing the linked list if no shadow ram supported */
+ if (!priv->cfg->shadow_ram_support) {
+ if (iwl_find_otp_image(priv, &validblockaddr)) {
+ ret = -ENOENT;
goto done;
}
- r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
- /* check for ECC errors: */
- otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
- if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
- /* stop in this case */
- IWL_ERR(priv, "Uncorrectable OTP ECC error, Abort OTP read\n");
+ }
+ for (addr = validblockaddr; addr < validblockaddr + sz;
+ addr += sizeof(u16)) {
+ u16 eeprom_data;
+
+ ret = iwl_read_otp_word(priv, addr, &eeprom_data);
+ if (ret)
goto done;
- }
- if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
- /* continue in this case */
- _iwl_write32(priv, CSR_OTP_GP_REG,
- iwl_read32(priv, CSR_OTP_GP_REG) |
- CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
- IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
- }
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
+ e[cache_addr / 2] = eeprom_data;
+ cache_addr += sizeof(u16);
}
} else {
/* eeprom is an array of 16bit values */
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 195b4ef..7899885 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -180,8 +180,14 @@ struct iwl_eeprom_channel {
#define EEPROM_5050_EEPROM_VERSION (0x21E)

/* OTP */
-#define OTP_LOWER_BLOCKS_TOTAL (3)
-#define OTP_BLOCK_SIZE (0x400)
+/* lower blocks contain EEPROM image and calibration data */
+#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */
+/* high blocks contain PAPD data */
+#define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */
+#define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */
+#define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */
+#define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */
+#define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */

/* 2.4 GHz */
extern const u8 iwl_eeprom_band_1[14];
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 3b9cac3..d393e8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -80,6 +80,8 @@
#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
+#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
+#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)

#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
@@ -91,7 +93,8 @@
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
-
+#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
+#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)

#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index e26875d..474fd49 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -799,7 +799,8 @@ void iwl_bg_abort_scan(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);

- if (!iwl_is_ready(priv))
+ if (!test_bit(STATUS_READY, &priv->status) ||
+ !test_bit(STATUS_GEO_CONFIGURED, &priv->status))
return;

mutex_lock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 5238433..054d6c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2111,7 +2111,7 @@ static void iwl3945_nic_start(struct iwl_priv *priv)
*/
static int iwl3945_read_ucode(struct iwl_priv *priv)
{
- struct iwl_ucode *ucode;
+ const struct iwl_ucode_header *ucode;
int ret = -EINVAL, index;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
@@ -2152,22 +2152,24 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
goto error;

/* Make sure that we got at least our header! */
- if (ucode_raw->size < sizeof(*ucode)) {
+ if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
IWL_ERR(priv, "File size way too small!\n");
ret = -EINVAL;
goto err_release;
}

/* Data from ucode file: header followed by uCode images */
- ucode = (void *)ucode_raw->data;
+ ucode = (struct iwl_ucode_header *)ucode_raw->data;

priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
- inst_size = le32_to_cpu(ucode->inst_size);
- data_size = le32_to_cpu(ucode->data_size);
- init_size = le32_to_cpu(ucode->init_size);
- init_data_size = le32_to_cpu(ucode->init_data_size);
- boot_size = le32_to_cpu(ucode->boot_size);
+ inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
+ data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
+ init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
+ init_data_size =
+ priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
+ boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
+ src = priv->cfg->ops->ucode->get_data(ucode, api_ver);

/* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
@@ -2208,12 +2210,13 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)


/* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size < sizeof(*ucode) +
+ if (ucode_raw->size != priv->cfg->ops->ucode->get_header_size(api_ver) +
inst_size + data_size + init_size +
init_data_size + boot_size) {

- IWL_DEBUG_INFO(priv, "uCode file size %zd too small\n",
- ucode_raw->size);
+ IWL_DEBUG_INFO(priv,
+ "uCode file size %zd does not match expected size\n",
+ ucode_raw->size);
ret = -EINVAL;
goto err_release;
}
@@ -2296,44 +2299,44 @@ static int iwl3945_read_ucode(struct iwl_priv *priv)
/* Copy images into buffers for card's bus-master reads ... */

/* Runtime instructions (first block of data in file) */
- src = &ucode->data[0];
- len = priv->ucode_code.len;
+ len = inst_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode instr len %zd\n", len);
memcpy(priv->ucode_code.v_addr, src, len);
+ src += len;
+
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);

/* Runtime data (2nd block)
* NOTE: Copy into backup buffer will be done in iwl3945_up() */
- src = &ucode->data[inst_size];
- len = priv->ucode_data.len;
+ len = data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) uCode data len %zd\n", len);
memcpy(priv->ucode_data.v_addr, src, len);
memcpy(priv->ucode_data_backup.v_addr, src, len);
+ src += len;

/* Initialization instructions (3rd block) */
if (init_size) {
- src = &ucode->data[inst_size + data_size];
- len = priv->ucode_init.len;
+ len = init_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init instr len %zd\n", len);
memcpy(priv->ucode_init.v_addr, src, len);
+ src += len;
}

/* Initialization data (4th block) */
if (init_data_size) {
- src = &ucode->data[inst_size + data_size + init_size];
- len = priv->ucode_init_data.len;
+ len = init_data_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) init data len %zd\n", len);
memcpy(priv->ucode_init_data.v_addr, src, len);
+ src += len;
}

/* Bootstrap instructions (5th block) */
- src = &ucode->data[inst_size + data_size + init_size + init_data_size];
- len = priv->ucode_boot.len;
+ len = boot_size;
IWL_DEBUG_INFO(priv,
"Copying (but not loading) boot instr len %zd\n", len);
memcpy(priv->ucode_boot.v_addr, src, len);
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 0e877a1..6e1b889 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -66,6 +66,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */
{USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */
+ {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */
{USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */
{USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */
{USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9e1140f..e1dcced 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -363,7 +363,7 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
struct at91_cf_data *board = cf->board;

- pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ pcmcia_socket_dev_suspend(&pdev->dev);
if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(board->det_pin);
if (board->irq_pin)
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 9001334..0208870 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -515,7 +515,7 @@ static int au1x00_drv_pcmcia_probe(struct platform_device *dev)
static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index b59d411..300b368 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -302,7 +302,7 @@ static int __devexit bfin_cf_remove(struct platform_device *pdev)

static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}

static int bfin_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 0660ad1..934d4be 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -101,7 +101,7 @@ EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
static int socket_resume(struct pcmcia_socket *skt);
static int socket_suspend(struct pcmcia_socket *skt);

-int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state)
+int pcmcia_socket_dev_suspend(struct device *dev)
{
struct pcmcia_socket *socket;

diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 46561fa..a04f21c 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -42,7 +42,7 @@ MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids);
#ifdef CONFIG_PM
static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int i82092aa_socket_resume (struct pci_dev *dev)
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 40d4953..b906abe 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1241,7 +1241,7 @@ static int pcic_init(struct pcmcia_socket *s)
static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int i82365_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 62b4ecc..d1d89c4 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -699,7 +699,7 @@ static struct pccard_operations pcc_operations = {
static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int cfc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 12034b4..a065583 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -675,7 +675,7 @@ static struct pccard_operations pcc_operations = {
static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int pcc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index d1ad096..c69f2c4 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1296,7 +1296,7 @@ static int m8xx_remove(struct of_device *ofdev)
#ifdef CONFIG_PM
static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, state);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}

static int m8xx_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f373639..68570bc 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -334,7 +334,7 @@ static int __exit omap_cf_remove(struct platform_device *pdev)

static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}

static int omap_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8bed1da..1c39d34 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -758,7 +758,7 @@ static void __devexit pd6729_pci_remove(struct pci_dev *dev)
#ifdef CONFIG_PM
static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int pd6729_socket_resume(struct pci_dev *dev)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index c49a726..86ad876 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -302,7 +302,7 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)

static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d8da5ac..2d0e997 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -89,7 +89,7 @@ static int sa11x0_drv_pcmcia_remove(struct platform_device *dev)
static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 401052a..4be4e17 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -159,7 +159,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev)

static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int pcmcia_resume(struct sa1111_dev *dev)
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 8eb0423..582413f 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -366,7 +366,7 @@ static int __init get_tcic_id(void)
static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int tcic_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index d4ad50d..c9fcbdc 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -707,7 +707,7 @@ __setup("vrc4171_card=", vrc4171_card_setup);
static int vrc4171_card_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}

static int vrc4171_card_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 3ecd7c9..f728a45 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1225,60 +1225,71 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
}

#ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
{
- struct yenta_socket *socket = pci_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct yenta_socket *socket = pci_get_drvdata(pdev);
int ret;

- ret = pcmcia_socket_dev_suspend(&dev->dev, state);
+ ret = pcmcia_socket_dev_suspend(dev);

- if (socket) {
- if (socket->type && socket->type->save_state)
- socket->type->save_state(socket);
+ if (!socket)
+ return ret;

- /* FIXME: pci_save_state needs to have a better interface */
- pci_save_state(dev);
- pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
- pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
- pci_disable_device(dev);
+ if (socket->type && socket->type->save_state)
+ socket->type->save_state(socket);

- /*
- * Some laptops (IBM T22) do not like us putting the Cardbus
- * bridge into D3. At a guess, some other laptop will
- * probably require this, so leave it commented out for now.
- */
- /* pci_set_power_state(dev, 3); */
- }
+ pci_save_state(pdev);
+ pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+ pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+ pci_disable_device(pdev);
+
+ /*
+ * Some laptops (IBM T22) do not like us putting the Cardbus
+ * bridge into D3. At a guess, some other laptop will
+ * probably require this, so leave it commented out for now.
+ */
+ /* pci_set_power_state(dev, 3); */

return ret;
}

-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
{
- struct yenta_socket *socket = pci_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct yenta_socket *socket = pci_get_drvdata(pdev);
+ int ret;

- if (socket) {
- int rc;
+ if (!socket)
+ return 0;

- pci_set_power_state(dev, 0);
- /* FIXME: pci_restore_state needs to have a better interface */
- pci_restore_state(dev);
- pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
- pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+ pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+ pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);

- rc = pci_enable_device(dev);
- if (rc)
- return rc;
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;

- pci_set_master(dev);
+ pci_set_master(pdev);

- if (socket->type && socket->type->restore_state)
- socket->type->restore_state(socket);
- }
+ if (socket->type && socket->type->restore_state)
+ socket->type->restore_state(socket);

- return pcmcia_socket_dev_resume(&dev->dev);
+ return pcmcia_socket_dev_resume(dev);
}
+
+static struct dev_pm_ops yenta_pm_ops = {
+ .suspend_noirq = yenta_dev_suspend_noirq,
+ .resume_noirq = yenta_dev_resume_noirq,
+ .freeze_noirq = yenta_dev_suspend_noirq,
+ .thaw_noirq = yenta_dev_resume_noirq,
+ .poweroff_noirq = yenta_dev_suspend_noirq,
+ .restore_noirq = yenta_dev_resume_noirq,
+};
+
+#define YENTA_PM_OPS (&yenta_pm_ops)
+#else
+#define YENTA_PM_OPS NULL
#endif

#define CB_ID(vend,dev,type) \
@@ -1376,10 +1387,7 @@ static struct pci_driver yenta_cardbus_driver = {
.id_table = yenta_table,
.probe = yenta_probe,
.remove = __devexit_p(yenta_close),
-#ifdef CONFIG_PM
- .suspend = yenta_dev_suspend,
- .resume = yenta_dev_resume,
-#endif
+ .driver.pm = YENTA_PM_OPS,
};


diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index dafaa4a..a234a9d 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1081,6 +1081,8 @@ static int sony_nc_setup_rfkill(struct acpi_device *device,
struct rfkill *rfk;
enum rfkill_type type;
const char *name;
+ int result;
+ bool hwblock;

switch (nc_type) {
case SONY_WIFI:
@@ -1108,6 +1110,10 @@ static int sony_nc_setup_rfkill(struct acpi_device *device,
if (!rfk)
return -ENOMEM;

+ sony_call_snc_handle(0x124, 0x200, &result);
+ hwblock = !(result & 0x1);
+ rfkill_set_hw_state(rfk, hwblock);
+
err = rfkill_register(rfk);
if (err) {
rfkill_destroy(rfk);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e856008..d287283 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5655,16 +5655,16 @@ static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
/* Models with ATI GPUs known to require ECNVRAM mode */
TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */

- /* Models with ATI GPUs (waiting confirmation) */
- TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ /* Models with ATI GPUs that can use ECNVRAM */
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),

- /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+ /* Models with Intel Extreme Graphics 2 */
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
- TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),

/* Models with Intel GMA900 */
TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index b4a7650..4fff4e5 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,10 @@
# undef CONFIG_EARLY_PRINTK
#endif

+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
/* UART name and device definitions */
#define BFIN_SERIAL_NAME "ttyBF"
#define BFIN_SERIAL_MAJOR 204
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 79c9c5f..6ecb51b 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -884,6 +884,7 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 2bfc41e..e3861b2 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -59,6 +59,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
+#include <linux/serial.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
@@ -609,6 +610,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
acm->throttle = 0;

tasklet_schedule(&acm->urb_task);
+ set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
rv = tty_port_block_til_ready(&acm->port, tty, filp);
done:
mutex_unlock(&acm->mutex);
@@ -858,10 +860,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
if (!ACM_READY(acm))
return;

- /* FIXME: Needs to support the tty_baud interface */
- /* FIXME: Broken on sparc */
- newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
- (termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
+ newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty));
newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
newline.bParityType = termios->c_cflag & PARENB ?
(termios->c_cflag & PARODD ? 1 : 2) +
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index ba589d4..a9c3399 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -313,8 +313,13 @@ static ssize_t wdm_write
r = usb_autopm_get_interface(desc->intf);
if (r < 0)
goto outnp;
- r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
- &desc->flags));
+
+ if (!file->f_flags && O_NONBLOCK)
+ r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+ &desc->flags));
+ else
+ if (test_bit(WDM_IN_USE, &desc->flags))
+ r = -EAGAIN;
if (r < 0)
goto out;

@@ -377,7 +382,7 @@ outnl:
static ssize_t wdm_read
(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
- int rv, cntr;
+ int rv, cntr = 0;
int i = 0;
struct wdm_device *desc = file->private_data;

@@ -389,10 +394,23 @@ static ssize_t wdm_read
if (desc->length == 0) {
desc->read = 0;
retry:
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto err;
+ }
i++;
- rv = wait_event_interruptible(desc->wait,
- test_bit(WDM_READ, &desc->flags));
+ if (file->f_flags & O_NONBLOCK) {
+ if (!test_bit(WDM_READ, &desc->flags)) {
+ rv = cntr ? cntr : -EAGAIN;
+ goto err;
+ }
+ rv = 0;
+ } else {
+ rv = wait_event_interruptible(desc->wait,
+ test_bit(WDM_READ, &desc->flags));
+ }

+ /* may have happened while we slept */
if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
rv = -ENODEV;
goto err;
@@ -448,7 +466,7 @@ retry:

err:
mutex_unlock(&desc->rlock);
- if (rv < 0)
+ if (rv < 0 && rv != -EAGAIN)
dev_err(&desc->intf->dev, "wdm_read: exit error\n");
return rv;
}
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index b09a527..21b3719 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -367,13 +367,13 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
{
struct usbtmc_device_data *data;
struct device *dev;
- unsigned long int n_characters;
+ u32 n_characters;
u8 *buffer;
int actual;
- int done;
- int remaining;
+ size_t done;
+ size_t remaining;
int retval;
- int this_part;
+ size_t this_part;

/* Get pointer to private data structure */
data = filp->private_data;
@@ -455,6 +455,18 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
(buffer[6] << 16) +
(buffer[7] << 24);

+ /* Ensure the instrument doesn't lie about it */
+ if(n_characters > actual - 12) {
+ dev_err(dev, "Device lies about message size: %zu > %zu\n", n_characters, actual - 12);
+ n_characters = actual - 12;
+ }
+
+ /* Ensure the instrument doesn't send more back than requested */
+ if(n_characters > this_part) {
+ dev_err(dev, "Device returns more than requested: %zu > %zu\n", done + n_characters, done + this_part);
+ n_characters = this_part;
+ }
+
/* Copy buffer to user space */
if (copy_to_user(buf + done, &buffer[12], n_characters)) {
/* There must have been an addressing problem */
@@ -465,6 +477,8 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
done += n_characters;
if (n_characters < USBTMC_SIZE_IOBUFFER)
remaining = 0;
+ else
+ remaining -= n_characters;
}

/* Update file position value */
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index a16c538..0d3af6a 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -105,7 +105,7 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
ep->ss_ep_comp->extralen = i;
buffer += i;
size -= i;
- retval = buffer - buffer_start + i;
+ retval = buffer - buffer_start;
if (num_skipped > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
num_skipped, plural(num_skipped),
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a949259..5b22a4d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -719,8 +719,12 @@ retry:
/* port status seems weird until after reset, so
* force the reset and make khubd clean up later.
*/
- sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
- | (1 << USB_PORT_FEAT_CONNECTION);
+ if (sl811->stat_insrmv & 1)
+ sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+ else
+ sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+
+ sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;

} else if (irqstat & SL11H_INTMASK_RD) {
if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 705e343..33128d5 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -413,7 +413,8 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
int i;

struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
- dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+ dma_addr_t dma = ctx->dma +
+ ((unsigned long)slot_ctx - (unsigned long)ctx->bytes);
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);

xhci_dbg(xhci, "Slot Context:\n");
@@ -459,7 +460,7 @@ void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
for (i = 0; i < last_ep_ctx; ++i) {
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
dma_addr_t dma = ctx->dma +
- ((unsigned long)ep_ctx - (unsigned long)ctx);
+ ((unsigned long)ep_ctx - (unsigned long)ctx->bytes);

xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index 816c39c..e478a63 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -22,12 +22,18 @@

#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>

#include "xhci.h"

#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"

+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* handshake - spin reading hc until handshake completes or fails
@@ -214,6 +220,12 @@ int xhci_init(struct usb_hcd *hcd)

xhci_dbg(xhci, "xhci_init\n");
spin_lock_init(&xhci->lock);
+ if (link_quirk) {
+ xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
+ xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+ } else {
+ xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
+ }
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");

@@ -555,13 +567,22 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
return 1 << (xhci_get_endpoint_index(desc) + 1);
}

+/* Find the flag for this endpoint (for use in the control context). Use the
+ * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+ return 1 << (ep_index + 1);
+}
+
/* Compute the last valid endpoint context index. Basically, this is the
* endpoint index plus one. For slot contexts with more than valid endpoint,
* we find the most significant bit set in the added contexts flags.
* e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
* fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
*/
-static inline unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
{
return fls(added_ctxs) - 1;
}
@@ -589,6 +610,70 @@ int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
return 1;
}

+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_virt_device *virt_dev,
+ bool ctx_change);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor. If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, struct urb *urb)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_container_ctx *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ int max_packet_size;
+ int hw_max_packet_size;
+ int ret = 0;
+
+ out_ctx = xhci->devs[slot_id]->out_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+ hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2);
+ max_packet_size = urb->dev->ep0.desc.wMaxPacketSize;
+ if (hw_max_packet_size != max_packet_size) {
+ xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
+ xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
+ max_packet_size);
+ xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
+ hw_max_packet_size);
+ xhci_dbg(xhci, "Issuing evaluate context command.\n");
+
+ /* Set up the modified control endpoint 0 */
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index);
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ ep_ctx->ep_info2 &= ~MAX_PACKET_MASK;
+ ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size);
+
+ /* Set up the input context flags for the command */
+ /* FIXME: This won't work if a non-default control endpoint
+ * changes max packet sizes.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ ctrl_ctx->add_flags = EP0_FLAG;
+ ctrl_ctx->drop_flags = 0;
+
+ xhci_dbg(xhci, "Slot %d input context\n", slot_id);
+ xhci_dbg_ctx(xhci, in_ctx, ep_index);
+ xhci_dbg(xhci, "Slot %d output context\n", slot_id);
+ xhci_dbg_ctx(xhci, out_ctx, ep_index);
+
+ ret = xhci_configure_endpoint(xhci, urb->dev,
+ xhci->devs[slot_id], true);
+
+ /* Clean up the input context for later use by bandwidth
+ * functions.
+ */
+ ctrl_ctx->add_flags = SLOT_FLAG;
+ }
+ return ret;
+}
+
/*
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
@@ -600,13 +685,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
int ret = 0;
unsigned int slot_id, ep_index;

+
if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0)
return -EINVAL;

slot_id = urb->dev->slot_id;
ep_index = xhci_get_endpoint_index(&urb->ep->desc);

- spin_lock_irqsave(&xhci->lock, flags);
if (!xhci->devs || !xhci->devs[slot_id]) {
if (!in_interrupt())
dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n");
@@ -619,19 +704,38 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
ret = -ESHUTDOWN;
goto exit;
}
- if (usb_endpoint_xfer_control(&urb->ep->desc))
+ if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ /* Check to see if the max packet size for the default control
+ * endpoint changed during FS device enumeration
+ */
+ if (urb->dev->speed == USB_SPEED_FULL) {
+ ret = xhci_check_maxpacket(xhci, slot_id,
+ ep_index, urb);
+ if (ret < 0)
+ return ret;
+ }
+
/* We have a spinlock and interrupts disabled, so we must pass
* atomic context to this function, which may allocate memory.
*/
+ spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
- else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
+ spin_lock_irqsave(&xhci->lock, flags);
ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
- else
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+ slot_id, ep_index);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ } else {
ret = -EINVAL;
+ }
exit:
- spin_unlock_irqrestore(&xhci->lock, flags);
return ret;
}

@@ -930,6 +1034,122 @@ static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *vir
}
}

+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_virt_device *virt_dev)
+{
+ int ret;
+
+ switch (virt_dev->cmd_status) {
+ case COMP_ENOMEM:
+ dev_warn(&udev->dev, "Not enough host controller resources "
+ "for new device state.\n");
+ ret = -ENOMEM;
+ /* FIXME: can we allocate more resources for the HC? */
+ break;
+ case COMP_BW_ERR:
+ dev_warn(&udev->dev, "Not enough bandwidth "
+ "for new device state.\n");
+ ret = -ENOSPC;
+ /* FIXME: can we go back to the old state? */
+ break;
+ case COMP_TRB_ERR:
+ /* the HCD set up something wrong */
+ dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+ "add flag = 1, "
+ "and endpoint is not disabled.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_virt_device *virt_dev)
+{
+ int ret;
+
+ switch (virt_dev->cmd_status) {
+ case COMP_EINVAL:
+ dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
+ "context command.\n");
+ ret = -EINVAL;
+ break;
+ case COMP_EBADSLT:
+ dev_warn(&udev->dev, "WARN: slot not enabled for"
+ "evaluate context command.\n");
+ case COMP_CTX_STATE:
+ dev_warn(&udev->dev, "WARN: invalid context state for "
+ "evaluate context command.\n");
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
+ ret = -EINVAL;
+ break;
+ case COMP_SUCCESS:
+ dev_dbg(&udev->dev, "Successful evaluate context command\n");
+ ret = 0;
+ break;
+ default:
+ xhci_err(xhci, "ERROR: unexpected command completion "
+ "code 0x%x.\n", virt_dev->cmd_status);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+ struct usb_device *udev, struct xhci_virt_device *virt_dev,
+ bool ctx_change)
+{
+ int ret;
+ int timeleft;
+ unsigned long flags;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!ctx_change)
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
+ else
+ ret = xhci_queue_evaluate_context(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
+ return -ENOMEM;
+ }
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ /* Wait for the configure endpoint command to complete */
+ timeleft = wait_for_completion_interruptible_timeout(
+ &virt_dev->cmd_completion,
+ USB_CTRL_SET_TIMEOUT);
+ if (timeleft <= 0) {
+ xhci_warn(xhci, "%s while waiting for %s command\n",
+ timeleft == 0 ? "Timeout" : "Signal",
+ ctx_change == 0 ?
+ "configure endpoint" :
+ "evaluate context");
+ /* FIXME cancel the configure endpoint command */
+ return -ETIME;
+ }
+
+ if (!ctx_change)
+ return xhci_configure_endpoint_result(xhci, udev, virt_dev);
+ return xhci_evaluate_context_result(xhci, udev, virt_dev);
+}
+
/* Called after one or more calls to xhci_add_endpoint() or
* xhci_drop_endpoint(). If this call fails, the USB core is expected
* to call xhci_reset_bandwidth().
@@ -944,8 +1164,6 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
{
int i;
int ret = 0;
- int timeleft;
- unsigned long flags;
struct xhci_hcd *xhci;
struct xhci_virt_device *virt_dev;
struct xhci_input_control_ctx *ctrl_ctx;
@@ -975,56 +1193,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));

- spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
- udev->slot_id);
- if (ret < 0) {
- spin_unlock_irqrestore(&xhci->lock, flags);
- xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
- return -ENOMEM;
- }
- xhci_ring_cmd_db(xhci);
- spin_unlock_irqrestore(&xhci->lock, flags);
-
- /* Wait for the configure endpoint command to complete */
- timeleft = wait_for_completion_interruptible_timeout(
- &virt_dev->cmd_completion,
- USB_CTRL_SET_TIMEOUT);
- if (timeleft <= 0) {
- xhci_warn(xhci, "%s while waiting for configure endpoint command\n",
- timeleft == 0 ? "Timeout" : "Signal");
- /* FIXME cancel the configure endpoint command */
- return -ETIME;
- }
-
- switch (virt_dev->cmd_status) {
- case COMP_ENOMEM:
- dev_warn(&udev->dev, "Not enough host controller resources "
- "for new device state.\n");
- ret = -ENOMEM;
- /* FIXME: can we allocate more resources for the HC? */
- break;
- case COMP_BW_ERR:
- dev_warn(&udev->dev, "Not enough bandwidth "
- "for new device state.\n");
- ret = -ENOSPC;
- /* FIXME: can we go back to the old state? */
- break;
- case COMP_TRB_ERR:
- /* the HCD set up something wrong */
- dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, add flag = 1, "
- "and endpoint is not disabled.\n");
- ret = -EINVAL;
- break;
- case COMP_SUCCESS:
- dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
- break;
- default:
- xhci_err(xhci, "ERROR: unexpected command completion "
- "code 0x%x.\n", virt_dev->cmd_status);
- ret = -EINVAL;
- break;
- }
+ ret = xhci_configure_endpoint(xhci, udev, virt_dev, false);
if (ret) {
/* Callee should call reset_bandwidth() */
return ret;
@@ -1075,6 +1244,75 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_zero_in_ctx(xhci, virt_dev);
}

+void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state)
+{
+ struct xhci_container_ctx *in_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_ep_ctx *ep_ctx;
+ u32 added_ctxs;
+ dma_addr_t addr;
+
+ xhci_endpoint_copy(xhci, xhci->devs[slot_id], ep_index);
+ in_ctx = xhci->devs[slot_id]->in_ctx;
+ ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+ addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ if (addr == 0) {
+ xhci_warn(xhci, "WARN Cannot submit config ep after "
+ "reset ep command\n");
+ xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr);
+ return;
+ }
+ ep_ctx->deq = addr | deq_state->new_cycle_state;
+
+ xhci_slot_copy(xhci, xhci->devs[slot_id]);
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+ ctrl_ctx->add_flags = added_ctxs | SLOT_FLAG;
+ ctrl_ctx->drop_flags = added_ctxs;
+
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", slot_id);
+ xhci_dbg_ctx(xhci, in_ctx, ep_index);
+}
+
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ unsigned int ep_index, struct xhci_ring *ep_ring)
+{
+ struct xhci_dequeue_state deq_state;
+
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep_ring->stopped_td,
+ &deq_state);
+
+ /* HW with the reset endpoint quirk will use the saved dequeue state to
+ * issue a configure endpoint command later.
+ */
+ if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ } else {
+ /* Better hope no one uses the input context between now and the
+ * reset endpoint completion!
+ */
+ xhci_dbg(xhci, "Setting up input context for "
+ "configure endpoint command\n");
+ xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ ep_index, &deq_state);
+ }
+}
+
/* Deal with stalled endpoints. The core should have sent the control message
* to clear the halt condition. However, we need to make the xHCI hardware
* reset its sequence number, since a device will expect a sequence number of
@@ -1089,7 +1327,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
unsigned int ep_index;
unsigned long flags;
int ret;
- struct xhci_dequeue_state deq_state;
struct xhci_ring *ep_ring;

xhci = hcd_to_xhci(hcd);
@@ -1106,6 +1343,10 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
ep->desc.bEndpointAddress);
return;
}
+ if (usb_endpoint_xfer_control(&ep->desc)) {
+ xhci_dbg(xhci, "Control endpoint stall already handled.\n");
+ return;
+ }

xhci_dbg(xhci, "Queueing reset endpoint command\n");
spin_lock_irqsave(&xhci->lock, flags);
@@ -1116,16 +1357,7 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
* command. Better hope that last command worked!
*/
if (!ret) {
- xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
- /* We need to move the HW's dequeue pointer past this TD,
- * or it will attempt to resend it on the next doorbell ring.
- */
- xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, ep_ring->stopped_td, &deq_state);
- xhci_dbg(xhci, "Queueing new dequeue state\n");
- xhci_queue_new_dequeue_state(xhci, ep_ring,
- udev->slot_id,
- ep_index, &deq_state);
+ xhci_cleanup_stalled_ring(xhci, udev, ep_index, ep_ring);
kfree(ep_ring->stopped_td);
xhci_ring_cmd_db(xhci);
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index e6b9a1c..55920b3 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -94,6 +94,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
val &= ~TRB_TYPE_BITMASK;
val |= TRB_TYPE(TRB_LINK);
+ /* Always set the chain bit with 0.95 hardware */
+ if (xhci_link_trb_quirk(xhci))
+ val |= TRB_CHAIN;
prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
}
xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
@@ -398,15 +401,28 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
/* Step 5 */
ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
/*
- * See section 4.3 bullet 6:
- * The default Max Packet size for ep0 is "8 bytes for a USB2
- * LS/FS/HS device or 512 bytes for a USB3 SS device"
* XXX: Not sure about wireless USB devices.
*/
- if (udev->speed == USB_SPEED_SUPER)
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
ep0_ctx->ep_info2 |= MAX_PACKET(512);
- else
+ break;
+ case USB_SPEED_HIGH:
+ /* USB core guesses at a 64-byte max packet first for FS devices */
+ case USB_SPEED_FULL:
+ ep0_ctx->ep_info2 |= MAX_PACKET(64);
+ break;
+ case USB_SPEED_LOW:
ep0_ctx->ep_info2 |= MAX_PACKET(8);
+ break;
+ case USB_SPEED_VARIABLE:
+ xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+ return -EINVAL;
+ break;
+ default:
+ /* New speed? */
+ BUG();
+ }
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
@@ -598,6 +614,44 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
*/
}

+/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command.
+ */
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+ struct xhci_virt_device *vdev, unsigned int ep_index)
+{
+ struct xhci_ep_ctx *out_ep_ctx;
+ struct xhci_ep_ctx *in_ep_ctx;
+
+ out_ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+ in_ep_ctx = xhci_get_ep_ctx(xhci, vdev->in_ctx, ep_index);
+
+ in_ep_ctx->ep_info = out_ep_ctx->ep_info;
+ in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
+ in_ep_ctx->deq = out_ep_ctx->deq;
+ in_ep_ctx->tx_info = out_ep_ctx->tx_info;
+}
+
+/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
+ * Useful when you want to change one particular aspect of the endpoint and then
+ * issue a configure endpoint command. Only the context entries field matters,
+ * but we'll copy the whole thing anyway.
+ */
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev)
+{
+ struct xhci_slot_ctx *in_slot_ctx;
+ struct xhci_slot_ctx *out_slot_ctx;
+
+ in_slot_ctx = xhci_get_slot_ctx(xhci, vdev->in_ctx);
+ out_slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+
+ in_slot_ctx->dev_info = out_slot_ctx->dev_info;
+ in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
+ in_slot_ctx->tt_info = out_slot_ctx->tt_info;
+ in_slot_ctx->dev_state = out_slot_ctx->dev_state;
+}
+
/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
{
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 592fe7e..8fb308d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -24,6 +24,10 @@

#include "xhci.h"

+/* Device for a quirk */
+#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
+#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+
static const char hcd_name[] = "xhci_hcd";

/* called after powerup, by probe or system-pm "wakeup" */
@@ -62,6 +66,15 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
xhci_print_registers(xhci);

+ /* Look for vendor-specific quirks */
+ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x0) {
+ xhci->quirks |= XHCI_RESET_EP_QUIRK;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
+ " endpoint cmd after reset endpoint\n");
+ }
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index aa88a06..ff5e6bc 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -172,8 +172,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
* have their chain bit cleared (so that each Link TRB is a separate TD).
*
* Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
- * set, but other sections talk about dealing with the chain bit set.
- * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ * set, but other sections talk about dealing with the chain bit set. This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
*/
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
{
@@ -191,8 +192,14 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
- next->link.control &= ~TRB_CHAIN;
- next->link.control |= chain;
+ /* If we're not dealing with 0.95 hardware,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ if (!xhci_link_trb_quirk(xhci)) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
+ }
/* Give this link TRB to the hardware */
wmb();
if (next->link.control & TRB_CYCLE)
@@ -462,7 +469,6 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
* ring running.
*/
ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
}

/*
@@ -531,6 +537,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
xhci_queue_new_dequeue_state(xhci, ep_ring,
slot_id, ep_index, &deq_state);
+ xhci_ring_cmd_db(xhci);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -644,18 +651,31 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
{
int slot_id;
unsigned int ep_index;
+ struct xhci_ring *ep_ring;

slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
/* This command will only fail if the endpoint wasn't halted,
* but we don't care.
*/
xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
(unsigned int) GET_COMP_CODE(event->status));

- /* Clear our internal halted state and restart the ring */
- xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
- ring_ep_doorbell(xhci, slot_id, ep_index);
+ /* HW with the reset endpoint quirk needs to have a configure endpoint
+ * command complete before the endpoint can be used. Queue that here
+ * because the HW can't handle two commands being queued in a row.
+ */
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+ xhci_dbg(xhci, "Queueing configure endpoint command\n");
+ xhci_queue_configure_endpoint(xhci,
+ xhci->devs[slot_id]->in_ctx->dma, slot_id);
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Clear our internal halted state and restart the ring */
+ ep_ring->state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ }
}

static void handle_cmd_completion(struct xhci_hcd *xhci,
@@ -664,6 +684,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
int slot_id = TRB_TO_SLOT_ID(event->flags);
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ unsigned int ep_state;

cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
@@ -691,6 +715,41 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci_free_virt_device(xhci, slot_id);
break;
case TRB_TYPE(TRB_CONFIG_EP):
+ /*
+ * Configure endpoint commands can come from the USB core
+ * configuration or alt setting changes, or because the HW
+ * needed an extra configure endpoint command after a reset
+ * endpoint command. In the latter case, the xHCI driver is
+ * not waiting on the configure endpoint command.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci,
+ xhci->devs[slot_id]->in_ctx);
+ /* Input ctx add_flags are the endpoint index plus one */
+ ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
+ ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ if (!ep_ring) {
+ /* This must have been an initial configure endpoint */
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ break;
+ }
+ ep_state = ep_ring->state;
+ xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, "
+ "state = %d\n", ep_index, ep_state);
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+ ep_state & EP_HALTED) {
+ /* Clear our internal halted state and restart ring */
+ xhci->devs[slot_id]->ep_rings[ep_index]->state &=
+ ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ } else {
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ }
+ break;
+ case TRB_TYPE(TRB_EVAL_CONTEXT):
xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
complete(&xhci->devs[slot_id]->cmd_completion);
break;
@@ -806,6 +865,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
{
struct xhci_virt_device *xdev;
struct xhci_ring *ep_ring;
+ unsigned int slot_id;
int ep_index;
struct xhci_td *td = 0;
dma_addr_t event_dma;
@@ -814,9 +874,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
struct urb *urb = 0;
int status = -EINPROGRESS;
struct xhci_ep_ctx *ep_ctx;
+ u32 trb_comp_code;

xhci_dbg(xhci, "In %s\n", __func__);
- xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
return -ENODEV;
@@ -870,7 +932,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
(unsigned int) event->flags);

/* Look for common error cases */
- switch (GET_COMP_CODE(event->transfer_len)) {
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ switch (trb_comp_code) {
/* Skip codes that require special handling depending on
* transfer type
*/
@@ -913,7 +976,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Was this a control transfer? */
if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
xhci_debug_trb(xhci, xhci->event_ring->dequeue);
- switch (GET_COMP_CODE(event->transfer_len)) {
+ switch (trb_comp_code) {
case COMP_SUCCESS:
if (event_trb == ep_ring->dequeue) {
xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
@@ -928,8 +991,39 @@ static int handle_tx_event(struct xhci_hcd *xhci,
break;
case COMP_SHORT_TX:
xhci_warn(xhci, "WARN: short transfer on control ep\n");
- status = -EREMOTEIO;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
break;
+ case COMP_BABBLE:
+ /* The 0.96 spec says a babbling control endpoint
+ * is not halted. The 0.96 spec says it is. Some HW
+ * claims to be 0.95 compliant, but it halts the control
+ * endpoint anyway. Check if a babble halted the
+ * endpoint.
+ */
+ if (ep_ctx->ep_info != EP_STATE_HALTED)
+ break;
+ /* else fall through */
+ case COMP_STALL:
+ /* Did we transfer part of the data (middle) phase? */
+ if (event_trb != ep_ring->dequeue &&
+ event_trb != td->last_trb)
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length
+ - TRB_LEN(event->transfer_len);
+ else
+ td->urb->actual_length = 0;
+
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ xhci_queue_reset_ep(xhci, slot_id, ep_index);
+ xhci_cleanup_stalled_ring(xhci,
+ td->urb->dev,
+ ep_index, ep_ring);
+ xhci_ring_cmd_db(xhci);
+ goto td_cleanup;
default:
/* Others already handled above */
break;
@@ -943,7 +1037,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (event_trb == td->last_trb) {
if (td->urb->actual_length != 0) {
/* Don't overwrite a previously set error code */
- if (status == -EINPROGRESS || status == 0)
+ if ((status == -EINPROGRESS ||
+ status == 0) &&
+ (td->urb->transfer_flags
+ & URB_SHORT_NOT_OK))
/* Did we already see a short data stage? */
status = -EREMOTEIO;
} else {
@@ -952,7 +1049,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
} else {
/* Maybe the event was for the data stage? */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
+ if (trb_comp_code != COMP_STOP_INVAL) {
/* We didn't stop on a link TRB in the middle */
td->urb->actual_length =
td->urb->transfer_buffer_length -
@@ -964,7 +1061,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
}
} else {
- switch (GET_COMP_CODE(event->transfer_len)) {
+ switch (trb_comp_code) {
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
if (event_trb != td->last_trb) {
@@ -975,7 +1072,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
else
status = 0;
} else {
- xhci_dbg(xhci, "Successful bulk transfer!\n");
+ if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+ xhci_dbg(xhci, "Successful bulk "
+ "transfer!\n");
+ else
+ xhci_dbg(xhci, "Successful interrupt "
+ "transfer!\n");
status = 0;
}
break;
@@ -1001,11 +1103,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
td->urb->actual_length =
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
- if (td->urb->actual_length < 0) {
+ if (td->urb->transfer_buffer_length <
+ td->urb->actual_length) {
xhci_warn(xhci, "HC gave bad length "
"of %d bytes left\n",
TRB_LEN(event->transfer_len));
td->urb->actual_length = 0;
+ if (td->urb->transfer_flags &
+ URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
}
/* Don't overwrite a previously set error code */
if (status == -EINPROGRESS) {
@@ -1041,14 +1149,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* If the ring didn't stop on a Link or No-op TRB, add
* in the actual bytes transferred from the Normal TRB
*/
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ if (trb_comp_code != COMP_STOP_INVAL)
td->urb->actual_length +=
TRB_LEN(cur_trb->generic.field[2]) -
TRB_LEN(event->transfer_len);
}
}
- if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
- GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ if (trb_comp_code == COMP_STOP_INVAL ||
+ trb_comp_code == COMP_STOP) {
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
@@ -1056,7 +1164,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
ep_ring->stopped_td = td;
ep_ring->stopped_trb = event_trb;
} else {
- if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+ if (trb_comp_code == COMP_STALL ||
+ trb_comp_code == COMP_BABBLE) {
/* The transfer is completed from the driver's
* perspective, but we need to issue a set dequeue
* command for this stalled endpoint to move the dequeue
@@ -1072,16 +1181,41 @@ static int handle_tx_event(struct xhci_hcd *xhci,
inc_deq(xhci, ep_ring, false);
}

+td_cleanup:
/* Clean up the endpoint's TD list */
urb = td->urb;
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than
+ * the buffer length, urb->actual_length will be a very big
+ * number (since it's unsigned). Play it safe and say we didn't
+ * transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB transfer length is wrong, "
+ "xHC issue? req. len = %u, "
+ "act. len = %u\n",
+ urb->transfer_buffer_length,
+ urb->actual_length);
+ urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ }
list_del(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list)) {
list_del(&td->cancelled_td_list);
ep_ring->cancels_pending--;
}
- /* Leave the TD around for the reset endpoint function to use */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+ /* Leave the TD around for the reset endpoint function to use
+ * (but only if it's not a control endpoint, since we already
+ * queued the Set TR dequeue pointer command for stalled
+ * control endpoints).
+ */
+ if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+ (trb_comp_code != COMP_STALL &&
+ trb_comp_code != COMP_BABBLE)) {
kfree(td);
}
urb->hcpriv = NULL;
@@ -1094,7 +1228,7 @@ cleanup:
if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
- urb, td->urb->actual_length, status);
+ urb, urb->actual_length, status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
spin_lock(&xhci->lock);
@@ -1335,6 +1469,47 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
ring_ep_doorbell(xhci, slot_id, ep_index);
}

+/*
+ * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
+ * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
+ * (comprised of sg list entries) can take several service intervals to
+ * transmit.
+ */
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
+ xhci->devs[slot_id]->out_ctx, ep_index);
+ int xhci_interval;
+ int ep_interval;
+
+ xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+ ep_interval = urb->interval;
+ /* Convert to microframes */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ ep_interval *= 8;
+ /* FIXME change this to a warning and a suggestion to use the new API
+ * to set the polling interval (once the API is added).
+ */
+ if (xhci_interval != ep_interval) {
+ if (!printk_ratelimit())
+ dev_dbg(&urb->dev->dev, "Driver uses different interval"
+ " (%d microframe%s) than xHCI "
+ "(%d microframe%s)\n",
+ ep_interval,
+ ep_interval == 1 ? "" : "s",
+ xhci_interval,
+ xhci_interval == 1 ? "" : "s");
+ urb->interval = xhci_interval;
+ /* Convert back to frames for LS/FS devices */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->interval /= 8;
+ }
+ return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
@@ -1733,6 +1908,15 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
}

+/* Queue an evaluate context command TRB */
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id)
+{
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
+ TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id));
+}
+
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index d31d322..8085841 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -581,6 +581,7 @@ struct xhci_ep_ctx {
/* bit 15 is Linear Stream Array */
/* Interval - period between requests to an endpoint - 125u increments. */
#define EP_INTERVAL(p) ((p & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))

/* ep_info2 bitmasks */
/*
@@ -589,6 +590,7 @@ struct xhci_ep_ctx {
*/
#define FORCE_EVENT (0x1)
#define ERROR_COUNT(p) (((p) & 0x3) << 1)
+#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
#define EP_TYPE(p) ((p) << 3)
#define ISOC_OUT_EP 1
#define BULK_OUT_EP 2
@@ -601,6 +603,8 @@ struct xhci_ep_ctx {
/* bit 7 is Host Initiate Disable - for disabling stream selection */
#define MAX_BURST(p) (((p)&0xff) << 8)
#define MAX_PACKET(p) (((p)&0xffff) << 16)
+#define MAX_PACKET_MASK (0xffff << 16)
+#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)


/**
@@ -926,6 +930,12 @@ struct xhci_td {
union xhci_trb *last_trb;
};

+struct xhci_dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
struct xhci_ring {
struct xhci_segment *first_seg;
union xhci_trb *enqueue;
@@ -952,12 +962,6 @@ struct xhci_ring {
u32 cycle_state;
};

-struct xhci_dequeue_state {
- struct xhci_segment *new_deq_seg;
- union xhci_trb *new_deq_ptr;
- int new_cycle_state;
-};
-
struct xhci_erst_entry {
/* 64-bit event ring segment address */
u64 seg_addr;
@@ -1058,6 +1062,9 @@ struct xhci_hcd {
int noops_submitted;
int noops_handled;
int error_bitmask;
+ unsigned int quirks;
+#define XHCI_LINK_TRB_QUIRK (1 << 0)
+#define XHCI_RESET_EP_QUIRK (1 << 1)
};

/* For testing purposes */
@@ -1136,6 +1143,13 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
writel(val_hi, ptr + 1);
}

+static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
+{
+ u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+ return ((HC_VERSION(temp) == 0x95) &&
+ (xhci->quirks & XHCI_LINK_TRB_QUIRK));
+}
+
/* xHCI debugging */
void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1158,7 +1172,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
+unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_endpoint_copy(struct xhci_hcd *xhci,
+ struct xhci_virt_device *vdev, unsigned int ep_index);
+void xhci_slot_copy(struct xhci_hcd *xhci, struct xhci_virt_device *vdev);
int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
struct usb_device *udev, struct usb_host_endpoint *ep,
gfp_t mem_flags);
@@ -1205,8 +1224,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
+ int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id);
int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index);
void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
@@ -1215,6 +1238,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
struct xhci_ring *ep_ring, unsigned int slot_id,
unsigned int ep_index, struct xhci_dequeue_state *deq_state);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ unsigned int ep_index, struct xhci_ring *ep_ring);
+void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state);

/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index aec6188..1a50beb 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -35,11 +35,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);

-struct ark3116_private {
- spinlock_t lock;
- u8 termios_initialized;
-};
-
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index)
@@ -82,22 +77,11 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
- struct ark3116_private *priv;
- int i;
-
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
- spin_lock_init(&priv->lock);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }

buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem?");
- goto cleanup;
+ return -ENOMEM;
}

/* 3 */
@@ -149,13 +133,16 @@ static int ark3116_attach(struct usb_serial *serial)

kfree(buf);
return 0;
+}

-cleanup:
- for (--i; i >= 0; --i) {
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+static void ark3116_init_termios(struct tty_struct *tty)
+{
+ struct ktermios *termios = tty->termios;
+ *termios = tty_std_termios;
+ termios->c_cflag = B9600 | CS8
+ | CREAD | HUPCL | CLOCAL;
+ termios->c_ispeed = 9600;
+ termios->c_ospeed = 9600;
}

static void ark3116_set_termios(struct tty_struct *tty,
@@ -163,10 +150,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
- struct ark3116_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
- unsigned long flags;
int baud;
int ark3116_baud;
char *buf;
@@ -176,16 +161,6 @@ static void ark3116_set_termios(struct tty_struct *tty,

dbg("%s - port %d", __func__, port->number);

- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *termios = tty_std_termios;
- termios->c_cflag = B9600 | CS8
- | CREAD | HUPCL | CLOCAL;
- termios->c_ispeed = 9600;
- termios->c_ospeed = 9600;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);

cflag = termios->c_cflag;
termios->c_cflag &= ~(CMSPAR|CRTSCTS);
@@ -455,6 +430,7 @@ static struct usb_serial_driver ark3116_device = {
.num_ports = 1,
.attach = ark3116_attach,
.set_termios = ark3116_set_termios,
+ .init_termios = ark3116_init_termios,
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.open = ark3116_open,
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 0e4f2e4..3e49b2e 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>

@@ -63,7 +64,7 @@ static int usb_console_setup(struct console *co, char *options)
char *s;
struct usb_serial *serial;
struct usb_serial_port *port;
- int retval = 0;
+ int retval;
struct tty_struct *tty = NULL;
struct ktermios *termios = NULL, dummy;

@@ -116,13 +117,17 @@ static int usb_console_setup(struct console *co, char *options)
return -ENODEV;
}

- port = serial->port[0];
+ retval = usb_autopm_get_interface(serial->interface);
+ if (retval)
+ goto error_get_interface;
+
+ port = serial->port[co->index - serial->minor];
tty_port_tty_set(&port->port, NULL);

info->port = port;

++port->port.count;
- if (port->port.count == 1) {
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
if (serial->type->set_termios) {
/*
* allocate a fake tty so the driver can initialize
@@ -168,6 +173,7 @@ static int usb_console_setup(struct console *co, char *options)
kfree(termios);
kfree(tty);
}
+ set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
/* Now that any required fake tty operations are completed restore
* the tty port count */
@@ -175,18 +181,22 @@ static int usb_console_setup(struct console *co, char *options)
/* The console is special in terms of closing the device so
* indicate this port is now acting as a system console. */
port->console = 1;
- retval = 0;

-out:
+ mutex_unlock(&serial->disc_mutex);
return retval;
-free_termios:
+
+ free_termios:
kfree(termios);
tty_port_tty_set(&port->port, NULL);
-free_tty:
+ free_tty:
kfree(tty);
-reset_open_count:
+ reset_open_count:
port->port.count = 0;
- goto out;
+ usb_autopm_put_interface(serial->interface);
+ error_get_interface:
+ usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
+ return retval;
}

static void usb_console_write(struct console *co,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 985cbcf..b5275c4 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -399,12 +399,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,

/* Configure the termios structure */
cp210x_get_termios(tty, port);
-
- /* Set the DTR and RTS pins low */
- cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
- : port,
- NULL, TIOCM_DTR | TIOCM_RTS, 0);
-
return 0;
}

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 59adfe1..27b5a27 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -659,15 +659,7 @@ static int cypress_open(struct tty_struct *tty,
spin_unlock_irqrestore(&priv->lock, flags);

/* Set termios */
- result = cypress_write(tty, port, NULL, 0);
-
- if (result) {
- dev_err(&port->dev,
- "%s - failed setting the control lines - error %d\n",
- __func__, result);
- return result;
- } else
- dbg("%s - success setting the control lines", __func__);
+ cypress_send(port);

if (tty)
cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1005,6 +997,8 @@ static void cypress_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);

spin_lock_irqsave(&priv->lock, flags);
+ /* We can't clean this one up as we don't know the device type
+ early enough */
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 80cb347..3433f9d 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -90,8 +90,7 @@ static int empeg_chars_in_buffer(struct tty_struct *tty);
static void empeg_throttle(struct tty_struct *tty);
static void empeg_unthrottle(struct tty_struct *tty);
static int empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
static void empeg_write_bulk_callback(struct urb *urb);
static void empeg_read_bulk_callback(struct urb *urb);

@@ -123,7 +122,7 @@ static struct usb_serial_driver empeg_device = {
.throttle = empeg_throttle,
.unthrottle = empeg_unthrottle,
.attach = empeg_startup,
- .set_termios = empeg_set_termios,
+ .init_termios = empeg_init_termios,
.write = empeg_write,
.write_room = empeg_write_room,
.chars_in_buffer = empeg_chars_in_buffer,
@@ -150,9 +149,6 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,

dbg("%s - port %d", __func__, port->number);

- /* Force default termio settings */
- empeg_set_termios(tty, port, NULL) ;
-
bytes_in = 0;
bytes_out = 0;

@@ -425,11 +421,9 @@ static int empeg_startup(struct usb_serial *serial)
}


-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
{
struct ktermios *termios = tty->termios;
- dbg("%s - port %d", __func__, port->number);

/*
* The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8fec5d4..0cc78f9 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -176,6 +176,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@@ -694,6 +697,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -702,6 +707,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8c92b88..6f31e0d 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -81,6 +81,9 @@

/* OpenDCC (www.opendcc.de) product id */
#define FTDI_OPENDCC_PID 0xBFD8
+#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
+#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
+#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB

/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
@@ -930,6 +933,7 @@
*/
#define ADI_VID 0x0456
#define ADI_GNICE_PID 0xF000
+#define ADI_GNICEPLUS_PID 0xF001

/*
* JETI SPECTROMETER SPECBOS 1201
@@ -968,6 +972,12 @@
#define MARVELL_OPENRD_PID 0x9e90

/*
+ * Hameg HO820 and HO870 interface (using VID 0x0403)
+ */
+#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO870_PID 0xed71
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 96873a7..af6df6c 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -71,7 +71,6 @@ struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
u8 line_status;
- u8 termios_initialized;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
u8 reset; /* if 1 reset is needed */
int poll; /* number of poll */
@@ -1018,6 +1017,18 @@ static void iuu_close(struct usb_serial_port *port)
}
}

+static void iuu_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+ | TIOCM_CTS | CSTOPB | PARENB;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
+ tty->termios->c_lflag = 0;
+ tty->termios->c_oflag = 0;
+ tty->termios->c_iflag = 0;
+}
+
static int iuu_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
@@ -1025,7 +1036,6 @@ static int iuu_open(struct tty_struct *tty,
u8 *buf;
int result;
u32 actual;
- unsigned long flags;
struct iuu_private *priv = usb_get_serial_port_data(port);

dbg("%s - port %d", __func__, port->number);
@@ -1064,21 +1074,7 @@ static int iuu_open(struct tty_struct *tty,
port->bulk_in_buffer, 512,
NULL, NULL);

- /* set the termios structure */
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && !priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
- | TIOCM_CTS | CSTOPB | PARENB;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- tty->termios->c_lflag = 0;
- tty->termios->c_oflag = 0;
- tty->termios->c_iflag = 0;
- priv->termios_initialized = 1;
- priv->poll = 0;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->poll = 0;

/* initialize writebuf */
#define FISH(a, b, c, d) do { \
@@ -1201,6 +1197,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
+ .init_termios = iuu_init_termios,
.attach = iuu_startup,
.release = iuu_release,
};
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6db0e56..46d47d1 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -85,7 +85,7 @@ static void kobil_read_int_callback(struct urb *urb);
static void kobil_write_callback(struct urb *purb);
static void kobil_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);

static struct usb_device_id id_table [] = {
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -120,6 +120,7 @@ static struct usb_serial_driver kobil_device = {
.release = kobil_release,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
+ .init_termios = kobil_init_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -210,6 +211,15 @@ static void kobil_release(struct usb_serial *serial)
kfree(usb_get_serial_port_data(serial->port[i]));
}

+static void kobil_init_termios(struct tty_struct *tty)
+{
+ /* Default to echo off and other sane device settings */
+ tty->termios->c_lflag = 0;
+ tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+ tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+ /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+ tty->termios->c_oflag &= ~ONLCR;
+}

static int kobil_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
@@ -226,16 +236,6 @@ static int kobil_open(struct tty_struct *tty,
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;

- if (tty) {
-
- /* Default to echo off and other sane device settings */
- tty->termios->c_lflag = 0;
- tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
- XCASE);
- tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
- /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
- tty->termios->c_oflag &= ~ONLCR;
- }
/* allocate memory for transfer buffer */
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (!transfer_buffer)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c784ddb..0101548 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -292,6 +292,7 @@ static int option_resume(struct usb_serial *serial);

#define TELIT_VENDOR_ID 0x1bc7
#define TELIT_PRODUCT_UC864E 0x1003
+#define TELIT_PRODUCT_UC864G 0x1004

/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
@@ -300,6 +301,7 @@ static int option_resume(struct usb_serial *serial);
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710 0xfff1
+#define ZTE_PRODUCT_AC2726 0xfff5

#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -503,6 +505,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
@@ -572,6 +575,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 3cece27..ef34cff 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -146,6 +146,7 @@ static int oti6858_open(struct tty_struct *tty,
static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
@@ -186,6 +187,7 @@ static struct usb_serial_driver oti6858_device = {
.write = oti6858_write,
.ioctl = oti6858_ioctl,
.set_termios = oti6858_set_termios,
+ .init_termios = oti6858_init_termios,
.tiocmget = oti6858_tiocmget,
.tiocmset = oti6858_tiocmset,
.read_bulk_callback = oti6858_read_bulk_callback,
@@ -206,7 +208,6 @@ struct oti6858_private {
struct {
u8 read_urb_in_use;
u8 write_urb_in_use;
- u8 termios_initialized;
} flags;
struct delayed_work delayed_write_work;

@@ -447,6 +448,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
return chars;
}

+static void oti6858_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 38400;
+ tty->termios->c_ospeed = 38400;
+}
+
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -464,16 +473,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
return;
}

- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->flags.termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 38400;
- tty->termios->c_ospeed = 38400;
- priv->flags.termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
cflag = tty->termios->c_cflag;

spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3e86815..124d5ae 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -96,6 +96,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+ { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ } /* Terminating entry */
};

diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index ee9505e..d640dc9 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -130,3 +130,7 @@
/* Sony, USB data cable for CMD-Jxx mobile phones */
#define SONY_VENDOR_ID 0x054c
#define SONY_QN3USB_PRODUCT_ID 0x0437
+
+/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
+#define SANWA_VENDOR_ID 0x11ad
+#define SANWA_PRODUCT_ID 0x0001
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 3c249d8..993a6d5 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -299,7 +299,6 @@ struct spcp8x5_private {
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- u8 termios_initialized;
};

/* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port)
dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
}

+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+ /* for the 1st time call this function */
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 115200;
+ tty->termios->c_ospeed = 115200;
+}
+
/* set the serial param for transfer. we should check if we really need to
* transfer. if we set flow control we should do this too. */
static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
int i;
u8 control;

- /* for the 1st time call this function */
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 115200;
- tty->termios->c_ospeed = 115200;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);

/* check that they really want us to change something */
if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -1011,6 +1009,7 @@ static struct usb_serial_driver spcp8x5_device = {
.carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
+ .init_termios = spcp8x5_init_termios,
.ioctl = spcp8x5_ioctl,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 99188c9..a0702db 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -43,8 +43,6 @@
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
#define DRIVER_DESC "USB Serial Driver core"

-static void port_free(struct usb_serial_port *port);
-
/* Driver structure we register with the USB core */
static struct usb_driver usb_serial_driver = {
.name = "usbserial",
@@ -68,6 +66,11 @@ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
static DEFINE_MUTEX(table_lock);
static LIST_HEAD(usb_serial_driver_list);

+/*
+ * Look up the serial structure. If it is found and it hasn't been
+ * disconnected, return with its disc_mutex held and its refcount
+ * incremented. Otherwise return NULL.
+ */
struct usb_serial *usb_serial_get_by_index(unsigned index)
{
struct usb_serial *serial;
@@ -75,8 +78,15 @@ struct usb_serial *usb_serial_get_by_index(unsigned index)
mutex_lock(&table_lock);
serial = serial_table[index];

- if (serial)
- kref_get(&serial->kref);
+ if (serial) {
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected) {
+ mutex_unlock(&serial->disc_mutex);
+ serial = NULL;
+ } else {
+ kref_get(&serial->kref);
+ }
+ }
mutex_unlock(&table_lock);
return serial;
}
@@ -125,8 +135,10 @@ static void return_serial(struct usb_serial *serial)

dbg("%s", __func__);

+ mutex_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i)
serial_table[serial->minor + i] = NULL;
+ mutex_unlock(&table_lock);
}

static void destroy_serial(struct kref *kref)
@@ -145,161 +157,157 @@ static void destroy_serial(struct kref *kref)

serial->type->release(serial);

- for (i = 0; i < serial->num_ports; ++i) {
+ /* Now that nothing is using the ports, they can be freed */
+ for (i = 0; i < serial->num_port_pointers; ++i) {
port = serial->port[i];
- if (port)
+ if (port) {
+ port->serial = NULL;
put_device(&port->dev);
- }
-
- /* If this is a "fake" port, we have to clean it up here, as it will
- * not get cleaned up in port_release() as it was never registered with
- * the driver core */
- if (serial->num_ports < serial->num_port_pointers) {
- for (i = serial->num_ports;
- i < serial->num_port_pointers; ++i) {
- port = serial->port[i];
- if (port)
- port_free(port);
}
}

usb_put_dev(serial->dev);
-
- /* free up any memory that we allocated */
kfree(serial);
}

void usb_serial_put(struct usb_serial *serial)
{
- mutex_lock(&table_lock);
kref_put(&serial->kref, destroy_serial);
- mutex_unlock(&table_lock);
}

/*****************************************************************************
* Driver tty interface functions
*****************************************************************************/
-static int serial_open (struct tty_struct *tty, struct file *filp)
+
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty. We use the default
+ * USB serial settings but permit them to be overridden by
+ * serial->type->init_termios.
+ *
+ * This is the first place a new tty gets used. Hence this is where we
+ * acquire references to the usb_serial structure and the driver module,
+ * where we store a pointer to the port, and where we do an autoresume.
+ * All these actions are reversed in serial_release().
+ */
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
{
+ int idx = tty->index;
struct usb_serial *serial;
struct usb_serial_port *port;
- unsigned int portNumber;
- int retval = 0;
- int first = 0;
+ int retval = -ENODEV;

dbg("%s", __func__);

- /* get the serial object associated with this tty pointer */
- serial = usb_serial_get_by_index(tty->index);
- if (!serial) {
- tty->driver_data = NULL;
- return -ENODEV;
- }
+ serial = usb_serial_get_by_index(idx);
+ if (!serial)
+ return retval;

- mutex_lock(&serial->disc_mutex);
- portNumber = tty->index - serial->minor;
- port = serial->port[portNumber];
- if (!port || serial->disconnected)
- retval = -ENODEV;
- else
- get_device(&port->dev);
- /*
- * Note: Our locking order requirement does not allow port->mutex
- * to be acquired while serial->disc_mutex is held.
- */
- mutex_unlock(&serial->disc_mutex);
+ port = serial->port[idx - serial->minor];
+ if (!port)
+ goto error_no_port;
+ if (!try_module_get(serial->type->driver.owner))
+ goto error_module_get;
+
+ /* perform the standard setup */
+ retval = tty_init_termios(tty);
if (retval)
- goto bailout_serial_put;
+ goto error_init_termios;

- if (mutex_lock_interruptible(&port->mutex)) {
- retval = -ERESTARTSYS;
- goto bailout_port_put;
- }
+ retval = usb_autopm_get_interface(serial->interface);
+ if (retval)
+ goto error_get_interface;
+
+ mutex_unlock(&serial->disc_mutex);

- ++port->port.count;
+ /* allow the driver to update the settings */
+ if (serial->type->init_termios)
+ serial->type->init_termios(tty);

- /* set up our port structure making the tty driver
- * remember our port object, and us it */
tty->driver_data = port;
- tty_port_tty_set(&port->port, tty);

- /* If the console is attached, the device is already open */
- if (port->port.count == 1 && !port->console) {
- first = 1;
- /* lock this module before we call it
- * this may fail, which means we must bail out,
- * safe because we are called with BKL held */
- if (!try_module_get(serial->type->driver.owner)) {
- retval = -ENODEV;
- goto bailout_mutex_unlock;
- }
+ /* Final install (we use the default method) */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return retval;

+ error_get_interface:
+ error_init_termios:
+ module_put(serial->type->driver.owner);
+ error_module_get:
+ error_no_port:
+ usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
+ return retval;
+}
+
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+ int retval;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ spin_lock_irq(&port->port.lock);
+ if (!tty_hung_up_p(filp))
+ ++port->port.count;
+ spin_unlock_irq(&port->port.lock);
+ tty_port_tty_set(&port->port, tty);
+
+ /* Do the device-specific open only if the hardware isn't
+ * already initialized.
+ */
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
+ if (mutex_lock_interruptible(&port->mutex))
+ return -ERESTARTSYS;
mutex_lock(&serial->disc_mutex);
if (serial->disconnected)
retval = -ENODEV;
else
- retval = usb_autopm_get_interface(serial->interface);
- if (retval)
- goto bailout_module_put;
-
- /* only call the device specific open if this
- * is the first time the port is opened */
- retval = serial->type->open(tty, port, filp);
- if (retval)
- goto bailout_interface_put;
+ retval = port->serial->type->open(tty, port, filp);
mutex_unlock(&serial->disc_mutex);
+ mutex_unlock(&port->mutex);
+ if (retval)
+ return retval;
set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
- mutex_unlock(&port->mutex);
+
/* Now do the correct tty layer semantics */
retval = tty_port_block_til_ready(&port->port, tty, filp);
- if (retval == 0) {
- if (!first)
- usb_serial_put(serial);
- return 0;
- }
- mutex_lock(&port->mutex);
- if (first == 0)
- goto bailout_mutex_unlock;
- /* Undo the initial port actions */
- mutex_lock(&serial->disc_mutex);
-bailout_interface_put:
- usb_autopm_put_interface(serial->interface);
-bailout_module_put:
- mutex_unlock(&serial->disc_mutex);
- module_put(serial->type->driver.owner);
-bailout_mutex_unlock:
- port->port.count = 0;
- tty->driver_data = NULL;
- tty_port_tty_set(&port->port, NULL);
- mutex_unlock(&port->mutex);
-bailout_port_put:
- put_device(&port->dev);
-bailout_serial_put:
- usb_serial_put(serial);
return retval;
}

/**
- * serial_do_down - shut down hardware
- * @port: port to shut down
- *
- * Shut down a USB port unless it is the console. We never shut down the
- * console hardware as it will always be in use.
+ * serial_down - shut down hardware
+ * @port: port to shut down
*
- * Don't free any resources at this point
+ * Shut down a USB serial port unless it is the console. We never
+ * shut down the console hardware as it will always be in use.
*/
-static void serial_do_down(struct usb_serial_port *port)
+static void serial_down(struct usb_serial_port *port)
{
struct usb_serial_driver *drv = port->serial->type;
struct usb_serial *serial;
struct module *owner;

- /* The console is magical, do not hang up the console hardware
- or there will be tears */
+ /*
+ * The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
if (port->console)
return;

+ /* Don't call the close method if the hardware hasn't been
+ * initialized.
+ */
+ if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ return;
+
mutex_lock(&port->mutex);
serial = port->serial;
owner = serial->type->driver.owner;
@@ -310,79 +318,69 @@ static void serial_do_down(struct usb_serial_port *port)
mutex_unlock(&port->mutex);
}

-/**
- * serial_do_free - free resources post close/hangup
- * @port: port to free up
- *
- * Do the resource freeing and refcount dropping for the port. We must
- * be careful about ordering and we must avoid freeing up the console.
- */
-
-static void serial_do_free(struct usb_serial_port *port)
+static void serial_hangup(struct tty_struct *tty)
{
- struct usb_serial *serial;
- struct module *owner;
+ struct usb_serial_port *port = tty->driver_data;

- /* The console is magical, do not hang up the console hardware
- or there will be tears */
- if (port->console)
- return;
+ dbg("%s - port %d", __func__, port->number);

- serial = port->serial;
- owner = serial->type->driver.owner;
- put_device(&port->dev);
- /* Mustn't dereference port any more */
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
- usb_serial_put(serial);
- /* Mustn't dereference serial any more */
- module_put(owner);
+ serial_down(port);
+ tty_port_hangup(&port->port);
}

static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;

- if (!port)
- return;
-
dbg("%s - port %d", __func__, port->number);

- /* FIXME:
- This leaves a very narrow race. Really we should do the
- serial_do_free() on tty->shutdown(), but tty->shutdown can
- be called from IRQ context and serial_do_free can sleep.
-
- The right fix is probably to make the tty free (which is rare)
- and thus tty->shutdown() occur via a work queue and simplify all
- the drivers that use it.
- */
- if (tty_hung_up_p(filp)) {
- /* serial_hangup already called serial_down at this point.
- Another user may have already reopened the port but
- serial_do_free is refcounted */
- serial_do_free(port);
+ if (tty_hung_up_p(filp))
return;
- }
-
if (tty_port_close_start(&port->port, tty, filp) == 0)
return;
-
- serial_do_down(port);
+ serial_down(port);
tty_port_close_end(&port->port, tty);
tty_port_tty_set(&port->port, NULL);
- serial_do_free(port);
}

-static void serial_hangup(struct tty_struct *tty)
+/**
+ * serial_release - free resources post close/hangup
+ * @port: port to free up
+ *
+ * Do the resource freeing and refcount dropping for the port.
+ * Avoid freeing the console.
+ *
+ * Called when the last tty kref is dropped.
+ */
+static void serial_release(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- serial_do_down(port);
- tty_port_hangup(&port->port);
- /* We must not free port yet - the USB serial layer depends on it's
- continued existence */
+ struct usb_serial *serial;
+ struct module *owner;
+
+ /* The console is magical. Do not hang up the console hardware
+ * or there will be tears.
+ */
+ if (port->console)
+ return;
+
+ dbg("%s - port %d", __func__, port->number);
+
+ /* Standard shutdown processing */
+ tty_shutdown(tty);
+
+ tty->driver_data = NULL;
+
+ serial = port->serial;
+ owner = serial->type->driver.owner;
+
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+
+ usb_serial_put(serial);
+ module_put(owner);
}

static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -527,6 +525,7 @@ static int serial_proc_show(struct seq_file *m, void *v)

seq_putc(m, '\n');
usb_serial_put(serial);
+ mutex_unlock(&serial->disc_mutex);
}
return 0;
}
@@ -596,14 +595,6 @@ static void usb_serial_port_work(struct work_struct *work)
tty_kref_put(tty);
}

-static void port_release(struct device *dev)
-{
- struct usb_serial_port *port = to_usb_serial_port(dev);
-
- dbg ("%s - %s", __func__, dev_name(dev));
- port_free(port);
-}
-
static void kill_traffic(struct usb_serial_port *port)
{
usb_kill_urb(port->read_urb);
@@ -623,8 +614,12 @@ static void kill_traffic(struct usb_serial_port *port)
usb_kill_urb(port->interrupt_out_urb);
}

-static void port_free(struct usb_serial_port *port)
+static void port_release(struct device *dev)
{
+ struct usb_serial_port *port = to_usb_serial_port(dev);
+
+ dbg ("%s - %s", __func__, dev_name(dev));
+
/*
* Stop all the traffic before cancelling the work, so that
* nobody will restart it by calling usb_serial_port_softint.
@@ -935,6 +930,11 @@ int usb_serial_probe(struct usb_interface *interface,
mutex_init(&port->mutex);
INIT_WORK(&port->work, usb_serial_port_work);
serial->port[i] = port;
+ port->dev.parent = &interface->dev;
+ port->dev.driver = NULL;
+ port->dev.bus = &usb_serial_bus_type;
+ port->dev.release = &port_release;
+ device_initialize(&port->dev);
}

/* set up the endpoint information */
@@ -1077,15 +1077,10 @@ int usb_serial_probe(struct usb_interface *interface,
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
- port->dev.parent = &interface->dev;
- port->dev.driver = NULL;
- port->dev.bus = &usb_serial_bus_type;
- port->dev.release = &port_release;
-
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
port->dev_state = PORT_REGISTERING;
- retval = device_register(&port->dev);
+ retval = device_add(&port->dev);
if (retval) {
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
@@ -1103,39 +1098,7 @@ exit:
return 0;

probe_error:
- for (i = 0; i < num_bulk_in; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->read_urb);
- kfree(port->bulk_in_buffer);
- }
- for (i = 0; i < num_bulk_out; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->write_urb);
- kfree(port->bulk_out_buffer);
- }
- for (i = 0; i < num_interrupt_in; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->interrupt_in_urb);
- kfree(port->interrupt_in_buffer);
- }
- for (i = 0; i < num_interrupt_out; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- usb_free_urb(port->interrupt_out_urb);
- kfree(port->interrupt_out_buffer);
- }
-
- /* free up any memory that we allocated */
- for (i = 0; i < serial->num_port_pointers; ++i)
- kfree(serial->port[i]);
- kfree(serial);
+ usb_serial_put(serial);
return -EIO;
}
EXPORT_SYMBOL_GPL(usb_serial_probe);
@@ -1161,10 +1124,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
if (port) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
if (tty) {
- /* The hangup will occur asynchronously but
- the object refcounts will sort out all the
- cleanup */
- tty_hangup(tty);
+ tty_vhangup(tty);
tty_kref_put(tty);
}
kill_traffic(port);
@@ -1189,8 +1149,7 @@ void usb_serial_disconnect(struct usb_interface *interface)
}
serial->type->disconnect(serial);

- /* let the last holder of this object
- * cause it to be cleaned up */
+ /* let the last holder of this object cause it to be cleaned up */
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
@@ -1246,6 +1205,8 @@ static const struct tty_operations serial_ops = {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
+ .shutdown = serial_release,
+ .install = serial_install,
.proc_fops = &serial_proc_fops,
};

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 8d126dd..f7232b1 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
__u8 *data, __u8 datasize);
static int firm_open(struct usb_serial_port *port);
static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -1211,7 +1211,7 @@ static int firm_close(struct usb_serial_port *port)
}


-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
@@ -1286,7 +1286,7 @@ static int firm_setup_port(struct tty_struct *tty)
port_settings.lloop = 0;

/* now send the message to the device */
- return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+ firm_send_command(port, WHITEHEAT_SETUP_PORT,
(__u8 *)&port_settings, sizeof(port_settings));
}

diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index ec17c96..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -102,5 +102,5 @@ int usb_stor_huawei_e220_init(struct us_data *us)
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
0x01, 0x0, NULL, 0x0, 1000);
US_DEBUGP("Huawei mode set result is %d\n", result);
- return (result ? 0 : -ENODEV);
+ return 0;
}
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 380233b..80e65f2 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -163,7 +163,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action)
usb_kill_urb(onetouch->irq);
break;
case US_RESUME:
- if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0)
+ if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
dev_err(&onetouch->irq->dev->dev,
"usb_submit_urb failed\n");
break;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 3a44695..29ff5ea 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -114,6 +114,7 @@ static int last_fb_vc = MAX_NR_CONSOLES - 1;
static int fbcon_is_default = 1;
static int fbcon_has_exited;
static int primary_device = -1;
+static int fbcon_has_console_bind;

#ifdef CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY
static int map_override;
@@ -544,6 +545,8 @@ static int fbcon_takeover(int show_logo)
con2fb_map[i] = -1;
}
info_idx = -1;
+ } else {
+ fbcon_has_console_bind = 1;
}

return err;
@@ -2923,6 +2926,10 @@ static int fbcon_unbind(void)

ret = unbind_con_driver(&fb_con, first_fb_vc, last_fb_vc,
fbcon_is_default);
+
+ if (!ret)
+ fbcon_has_console_bind = 0;
+
return ret;
}
#else
@@ -2936,6 +2943,9 @@ static int fbcon_fb_unbind(int idx)
{
int i, new_idx = -1, ret = 0;

+ if (!fbcon_has_console_bind)
+ return 0;
+
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map[i] != idx &&
con2fb_map[i] != -1) {
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 5a72083..adf9632 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -1036,7 +1036,7 @@ static int s3c_fb_resume(struct platform_device *pdev)

static struct platform_driver s3c_fb_driver = {
.probe = s3c_fb_probe,
- .remove = s3c_fb_remove,
+ .remove = __devexit_p(s3c_fb_remove),
.suspend = s3c_fb_suspend,
.resume = s3c_fb_resume,
.driver = {
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h
index 705c853..bef4aae 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/sis/vstruct.h
@@ -342,7 +342,7 @@ struct SiS_Private
unsigned short SiS_RY4COE;
unsigned short SiS_LCDHDES;
unsigned short SiS_LCDVDES;
- unsigned short SiS_DDC_Port;
+ SISIOADDRESS SiS_DDC_Port;
unsigned short SiS_DDC_Index;
unsigned short SiS_DDC_Data;
unsigned short SiS_DDC_NData;
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index ec2a39b..7c28434 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -1,6 +1,9 @@
obj-y += grant-table.o features.o events.o manage.o
obj-y += xenbus/

+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_features.o := $(nostackp)
+
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += balloon.o
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6084d63..3cfec69 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -572,9 +572,9 @@ require use of the stronger protocol */
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xBF0BF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xB70B7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index b91851f..f0b53df 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -797,6 +797,7 @@ int ecryptfs_init_crypt_ctx(struct ecryptfs_crypt_stat *crypt_stat)
kfree(full_alg_name);
if (IS_ERR(crypt_stat->tfm)) {
rc = PTR_ERR(crypt_stat->tfm);
+ crypt_stat->tfm = NULL;
ecryptfs_printk(KERN_ERR, "cryptfs: init_crypt_ctx(): "
"Error initializing cipher [%s]\n",
crypt_stat->cipher);
@@ -1702,7 +1703,7 @@ ecryptfs_encrypt_filename(struct ecryptfs_filename *filename,
} else {
printk(KERN_ERR "%s: No support for requested filename "
"encryption method in this release\n", __func__);
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
goto out;
}
out:
@@ -2166,7 +2167,7 @@ int ecryptfs_encrypt_and_encode_filename(
(*encoded_name)[(*encoded_name_size)] = '\0';
(*encoded_name_size)++;
} else {
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
}
if (rc) {
printk(KERN_ERR "%s: Error attempting to encode "
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 2f0945d..056fed6 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -476,6 +476,7 @@ static int ecryptfs_unlink(struct inode *dir, struct dentry *dentry)
struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
struct dentry *lower_dir_dentry;

+ dget(lower_dentry);
lower_dir_dentry = lock_parent(lower_dentry);
rc = vfs_unlink(lower_dir_inode, lower_dentry);
if (rc) {
@@ -489,6 +490,7 @@ static int ecryptfs_unlink(struct inode *dir, struct dentry *dentry)
d_drop(dentry);
out_unlock:
unlock_dir(lower_dir_dentry);
+ dput(lower_dentry);
return rc;
}

diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 259525c..c77438f 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -416,7 +416,9 @@ ecryptfs_find_global_auth_tok_for_sig(
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
if (memcmp(walker->sig, sig, ECRYPTFS_SIG_SIZE_HEX) == 0) {
- (*global_auth_tok) = walker;
+ rc = key_validate(walker->global_auth_tok_key);
+ if (!rc)
+ (*global_auth_tok) = walker;
goto out;
}
}
@@ -612,7 +614,12 @@ ecryptfs_write_tag_70_packet(char *dest, size_t *remaining_bytes,
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
sg_init_one(
&s->hash_sg,
(u8 *)s->auth_tok->token.password.session_key_encryption_key,
@@ -910,7 +917,12 @@ ecryptfs_parse_tag_70_packet(char **filename, size_t *filename_size,
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
rc = crypto_blkcipher_setkey(
s->desc.tfm,
s->auth_tok->token.password.session_key_encryption_key,
@@ -1316,8 +1328,10 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
rc = -EINVAL;
goto out_free;
}
- ecryptfs_cipher_code_to_string(crypt_stat->cipher,
- (u16)data[(*packet_size)]);
+ rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
+ (u16)data[(*packet_size)]);
+ if (rc)
+ goto out_free;
/* A little extra work to differentiate among the AES key
* sizes; see RFC2440 */
switch(data[(*packet_size)++]) {
@@ -1328,7 +1342,9 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
crypt_stat->key_size =
(*new_auth_tok)->session_key.encrypted_key_size;
}
- ecryptfs_init_crypt_ctx(crypt_stat);
+ rc = ecryptfs_init_crypt_ctx(crypt_stat);
+ if (rc)
+ goto out_free;
if (unlikely(data[(*packet_size)++] != 0x03)) {
printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
rc = -ENOSYS;
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index c6d7a4d..e14cf7e 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -136,6 +136,7 @@ int ecryptfs_privileged_open(struct file **lower_file,
const struct cred *cred)
{
struct ecryptfs_open_req *req;
+ int flags = O_LARGEFILE;
int rc = 0;

/* Corresponding dput() and mntput() are done when the
@@ -143,10 +144,14 @@ int ecryptfs_privileged_open(struct file **lower_file,
* destroyed. */
dget(lower_dentry);
mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDWR | O_LARGEFILE), cred);
+ flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
+ (*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
+ if (flags & O_RDONLY) {
+ rc = PTR_ERR((*lower_file));
+ goto out;
+ }
req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
if (!req) {
rc = -ENOMEM;
@@ -180,21 +185,8 @@ int ecryptfs_privileged_open(struct file **lower_file,
__func__);
goto out_unlock;
}
- if (IS_ERR(*req->lower_file)) {
+ if (IS_ERR(*req->lower_file))
rc = PTR_ERR(*req->lower_file);
- dget(lower_dentry);
- mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDONLY | O_LARGEFILE), cred);
- if (IS_ERR(*lower_file)) {
- rc = PTR_ERR(*req->lower_file);
- (*lower_file) = NULL;
- printk(KERN_WARNING "%s: Error attempting privileged "
- "open of lower file with either RW or RO "
- "perms; rc = [%d]. Giving up.\n",
- __func__, rc);
- }
- }
out_unlock:
mutex_unlock(&req->mux);
out_free:
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 9f0aa98..101fe4c 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -129,11 +129,10 @@ int ecryptfs_init_persistent_file(struct dentry *ecryptfs_dentry)
lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
rc = ecryptfs_privileged_open(&inode_info->lower_file,
lower_dentry, lower_mnt, cred);
- if (rc || IS_ERR(inode_info->lower_file)) {
+ if (rc) {
printk(KERN_ERR "Error opening lower persistent file "
"for lower_dentry [0x%p] and lower_mnt [0x%p]; "
"rc = [%d]\n", lower_dentry, lower_mnt, rc);
- rc = PTR_ERR(inode_info->lower_file);
inode_info->lower_file = NULL;
}
}
diff --git a/fs/inode.c b/fs/inode.c
index ae7b67e..1a959c0 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -697,13 +697,15 @@ void unlock_new_inode(struct inode *inode)
}
#endif
/*
- * This is special! We do not need the spinlock
- * when clearing I_LOCK, because we're guaranteed
- * that nobody else tries to do anything about the
- * state of the inode when it is locked, as we
- * just created it (so there can be no old holders
- * that haven't tested I_LOCK).
+ * This is special! We do not need the spinlock when clearing I_LOCK,
+ * because we're guaranteed that nobody else tries to do anything about
+ * the state of the inode when it is locked, as we just created it (so
+ * there can be no old holders that haven't tested I_LOCK).
+ * However we must emit the memory barrier so that other CPUs reliably
+ * see the clearing of I_LOCK after the other inode initialisation has
+ * completed.
*/
+ smp_mb();
WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 3fd23f7..bf9b470 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -444,6 +444,7 @@ static struct rpc_cred *lookup_cb_cred(struct nfs4_cb_conn *cb)
struct auth_cred acred = {
.machine_cred = 1
};
+ struct rpc_auth *auth = cb->cb_client->cl_auth;

/*
* Note in the gss case this doesn't actually have to wait for a
@@ -451,8 +452,7 @@ static struct rpc_cred *lookup_cb_cred(struct nfs4_cb_conn *cb)
* non-uptodate cred which the rpc state machine will fill in with
* a refresh_upcall later.
*/
- return rpcauth_lookup_credcache(cb->cb_client->cl_auth, &acred,
- RPCAUTH_LOOKUP_NEW);
+ return auth->au_ops->lookup_cred(auth, &acred, RPCAUTH_LOOKUP_NEW);
}

void do_probe_callback(struct nfs4_client *clp)
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index c668bca..5be2c8b 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -36,6 +36,7 @@

void nilfs_btnode_cache_init_once(struct address_space *btnc)
{
+ memset(btnc, 0, sizeof(*btnc));
INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC);
spin_lock_init(&btnc->tree_lock);
INIT_LIST_HEAD(&btnc->private_list);
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index 59b43a0..5fd7d2b 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -361,7 +361,13 @@ read_kcore(struct file *file, char __user *buffer, size_t buflen, loff_t *fpos)
/* don't dump ioremap'd stuff! (TA) */
if (m->flags & VM_IOREMAP)
continue;
- memcpy(elf_buf + (vmstart - start),
+ /*
+ * we may access memory holes, then use
+ * ex_table. checking return value just for
+ * avoid warnings.
+ */
+ vmsize = __copy_from_user_inatomic(
+ elf_buf + (vmstart - start),
(char *)vmstart, vmsize);
}
read_unlock(&vmlist_lock);
diff --git a/fs/proc/uptime.c b/fs/proc/uptime.c
index 0c10a0b..766b1d4 100644
--- a/fs/proc/uptime.c
+++ b/fs/proc/uptime.c
@@ -4,13 +4,18 @@
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/time.h>
+#include <linux/kernel_stat.h>
#include <asm/cputime.h>

static int uptime_proc_show(struct seq_file *m, void *v)
{
struct timespec uptime;
struct timespec idle;
- cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
+ int i;
+ cputime_t idletime = cputime_zero;
+
+ for_each_possible_cpu(i)
+ idletime = cputime64_add(idletime, kstat_cpu(i).cpustat.idle);

do_posix_clock_monotonic_gettime(&uptime);
monotonic_to_bootbased(&uptime);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e8c6c91..b982a17 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -185,7 +185,12 @@ struct tty_port;
struct tty_port_operations {
/* Return 1 if the carrier is raised */
int (*carrier_raised)(struct tty_port *port);
+ /* Control the DTR line */
void (*dtr_rts)(struct tty_port *port, int raise);
+ /* Called when the last close completes or a hangup finishes
+ IFF the port was initialized. Do not use to free resources */
+ void (*shutdown)(struct tty_port *port);
+ void (*drop)(struct tty_port *port);
};

struct tty_port {
@@ -457,7 +462,8 @@ extern int tty_port_block_til_ready(struct tty_port *port,
extern int tty_port_close_start(struct tty_port *port,
struct tty_struct *tty, struct file *filp);
extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
-
+extern void tty_port_close(struct tty_port *port,
+ struct tty_struct *tty, struct file *filp);
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0ec50ba..73f121e 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -261,6 +261,9 @@ struct usb_serial_driver {
be an attached tty at this point */
void (*dtr_rts)(struct usb_serial_port *port, int on);
int (*carrier_raised)(struct usb_serial_port *port);
+ /* Called by the usb serial hooks to allow the user to rework the
+ termios state */
+ void (*init_termios)(struct tty_struct *tty);
/* USB events */
void (*read_int_callback)(struct urb *urb);
void (*write_int_callback)(struct urb *urb);
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 9b4ac93..56677eb 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -279,7 +279,7 @@ extern struct pccard_resource_ops pccard_iodyn_ops;
extern struct pccard_resource_ops pccard_nonstatic_ops;

/* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_suspend(struct device *dev);
extern int pcmcia_socket_dev_resume(struct device *dev);

/* socket drivers use this callback in their IRQ handler */
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index 3f49f53..b1dc468 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -4143,8 +4143,8 @@ done:
static int perf_copy_attr(struct perf_counter_attr __user *uattr,
struct perf_counter_attr *attr)
{
- int ret;
u32 size;
+ int ret;

if (!access_ok(VERIFY_WRITE, uattr, PERF_ATTR_SIZE_VER0))
return -EFAULT;
@@ -4169,19 +4169,19 @@ static int perf_copy_attr(struct perf_counter_attr __user *uattr,

/*
* If we're handed a bigger struct than we know of,
- * ensure all the unknown bits are 0.
+ * ensure all the unknown bits are 0 - i.e. new
+ * user-space does not rely on any kernel feature
+ * extensions we dont know about yet.
*/
if (size > sizeof(*attr)) {
- unsigned long val;
- unsigned long __user *addr;
- unsigned long __user *end;
+ unsigned char __user *addr;
+ unsigned char __user *end;
+ unsigned char val;

- addr = PTR_ALIGN((void __user *)uattr + sizeof(*attr),
- sizeof(unsigned long));
- end = PTR_ALIGN((void __user *)uattr + size,
- sizeof(unsigned long));
+ addr = (void __user *)uattr + sizeof(*attr);
+ end = (void __user *)uattr + size;

- for (; addr < end; addr += sizeof(unsigned long)) {
+ for (; addr < end; addr++) {
ret = get_user(val, addr);
if (ret)
return ret;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index cafdcee..cae0337 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1010,6 +1010,7 @@ int __weak alloc_bootmem_huge_page(struct hstate *h)
NODE_DATA(h->hugetlb_next_nid),
huge_page_size(h), huge_page_size(h), 0);

+ hstate_next_node(h);
if (addr) {
/*
* Use the beginning of the huge page to store the
@@ -1019,7 +1020,6 @@ int __weak alloc_bootmem_huge_page(struct hstate *h)
m = addr;
goto found;
}
- hstate_next_node(h);
nr_nodes--;
}
return 0;
diff --git a/mm/memory.c b/mm/memory.c
index aede2ce..753b2e6 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2638,7 +2638,8 @@ static int do_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
goto oom_free_page;

entry = mk_pte(page, vma->vm_page_prot);
- entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ if (vma->vm_flags & VM_WRITE)
+ entry = pte_mkwrite(pte_mkdirty(entry));

page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
if (!pte_none(*page_table))
diff --git a/mm/mlock.c b/mm/mlock.c
index 45eb650..e13918d 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -139,49 +139,36 @@ static void munlock_vma_page(struct page *page)
}

/**
- * __mlock_vma_pages_range() - mlock/munlock a range of pages in the vma.
+ * __mlock_vma_pages_range() - mlock a range of pages in the vma.
* @vma: target vma
* @start: start address
* @end: end address
- * @mlock: 0 indicate munlock, otherwise mlock.
*
- * If @mlock == 0, unlock an mlocked range;
- * else mlock the range of pages. This takes care of making the pages present ,
- * too.
+ * This takes care of making the pages present too.
*
* return 0 on success, negative error code on error.
*
* vma->vm_mm->mmap_sem must be held for at least read.
*/
static long __mlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end,
- int mlock)
+ unsigned long start, unsigned long end)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long addr = start;
struct page *pages[16]; /* 16 gives a reasonable batch */
int nr_pages = (end - start) / PAGE_SIZE;
int ret = 0;
- int gup_flags = 0;
+ int gup_flags;

VM_BUG_ON(start & ~PAGE_MASK);
VM_BUG_ON(end & ~PAGE_MASK);
VM_BUG_ON(start < vma->vm_start);
VM_BUG_ON(end > vma->vm_end);
- VM_BUG_ON((!rwsem_is_locked(&mm->mmap_sem)) &&
- (atomic_read(&mm->mm_users) != 0));
-
- /*
- * mlock: don't page populate if vma has PROT_NONE permission.
- * munlock: always do munlock although the vma has PROT_NONE
- * permission, or SIGKILL is pending.
- */
- if (!mlock)
- gup_flags |= GUP_FLAGS_IGNORE_VMA_PERMISSIONS |
- GUP_FLAGS_IGNORE_SIGKILL;
+ VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem));

+ gup_flags = 0;
if (vma->vm_flags & VM_WRITE)
- gup_flags |= GUP_FLAGS_WRITE;
+ gup_flags = GUP_FLAGS_WRITE;

while (nr_pages > 0) {
int i;
@@ -201,19 +188,10 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
* This can happen for, e.g., VM_NONLINEAR regions before
* a page has been allocated and mapped at a given offset,
* or for addresses that map beyond end of a file.
- * We'll mlock the the pages if/when they get faulted in.
+ * We'll mlock the pages if/when they get faulted in.
*/
if (ret < 0)
break;
- if (ret == 0) {
- /*
- * We know the vma is there, so the only time
- * we cannot get a single page should be an
- * error (ret < 0) case.
- */
- WARN_ON(1);
- break;
- }

lru_add_drain(); /* push cached pages to LRU */

@@ -224,28 +202,22 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
/*
* Because we lock page here and migration is blocked
* by the elevated reference, we need only check for
- * page truncation (file-cache only).
+ * file-cache page truncation. This page->mapping
+ * check also neatly skips over the ZERO_PAGE(),
+ * though if that's common we'd prefer not to lock it.
*/
- if (page->mapping) {
- if (mlock)
- mlock_vma_page(page);
- else
- munlock_vma_page(page);
- }
+ if (page->mapping)
+ mlock_vma_page(page);
unlock_page(page);
- put_page(page); /* ref from get_user_pages() */
-
- /*
- * here we assume that get_user_pages() has given us
- * a list of virtually contiguous pages.
- */
- addr += PAGE_SIZE; /* for next get_user_pages() */
- nr_pages--;
+ put_page(page); /* ref from get_user_pages() */
}
+
+ addr += ret * PAGE_SIZE;
+ nr_pages -= ret;
ret = 0;
}

- return ret; /* count entire vma as locked_vm */
+ return ret; /* 0 or negative error code */
}

/*
@@ -289,7 +261,7 @@ long mlock_vma_pages_range(struct vm_area_struct *vma,
is_vm_hugetlb_page(vma) ||
vma == get_gate_vma(current))) {

- __mlock_vma_pages_range(vma, start, end, 1);
+ __mlock_vma_pages_range(vma, start, end);

/* Hide errors from mmap() and other callers */
return 0;
@@ -310,7 +282,6 @@ no_mlock:
return nr_pages; /* error or pages NOT mlocked */
}

-
/*
* munlock_vma_pages_range() - munlock all pages in the vma range.'
* @vma - vma containing range to be munlock()ed.
@@ -330,10 +301,24 @@ no_mlock:
* free them. This will result in freeing mlocked pages.
*/
void munlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end)
{
+ unsigned long addr;
+
+ lru_add_drain();
vma->vm_flags &= ~VM_LOCKED;
- __mlock_vma_pages_range(vma, start, end, 0);
+
+ for (addr = start; addr < end; addr += PAGE_SIZE) {
+ struct page *page = follow_page(vma, addr, FOLL_GET);
+ if (page) {
+ lock_page(page);
+ if (page->mapping)
+ munlock_vma_page(page);
+ unlock_page(page);
+ put_page(page);
+ }
+ cond_resched();
+ }
}

/*
@@ -400,18 +385,14 @@ success:
* It's okay if try_to_unmap_one unmaps a page just after we
* set VM_LOCKED, __mlock_vma_pages_range will bring it back.
*/
- vma->vm_flags = newflags;

if (lock) {
- ret = __mlock_vma_pages_range(vma, start, end, 1);
-
- if (ret > 0) {
- mm->locked_vm -= ret;
- ret = 0;
- } else
- ret = __mlock_posix_error_return(ret); /* translate if needed */
+ vma->vm_flags = newflags;
+ ret = __mlock_vma_pages_range(vma, start, end);
+ if (ret < 0)
+ ret = __mlock_posix_error_return(ret);
} else {
- __mlock_vma_pages_range(vma, start, end, 0);
+ munlock_vma_pages_range(vma, start, end);
}

out:
diff --git a/mm/mmap.c b/mm/mmap.c
index 8101de4..cbb7cb3 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -570,9 +570,9 @@ again: remove_next = 1 + (end > next->vm_end);

/*
* When changing only vma->vm_end, we don't really need
- * anon_vma lock: but is that case worth optimizing out?
+ * anon_vma lock.
*/
- if (vma->anon_vma)
+ if (vma->anon_vma && (insert || importer || start != vma->vm_start))
anon_vma = vma->anon_vma;
if (anon_vma) {
spin_lock(&anon_vma->lock);
diff --git a/mm/nommu.c b/mm/nommu.c
index 66e81e7..82fedca 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1056,7 +1056,7 @@ static int do_mmap_shared_file(struct vm_area_struct *vma)
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
@@ -1073,7 +1073,8 @@ static int do_mmap_shared_file(struct vm_area_struct *vma)
*/
static int do_mmap_private(struct vm_area_struct *vma,
struct vm_region *region,
- unsigned long len)
+ unsigned long len,
+ unsigned long capabilities)
{
struct page *pages;
unsigned long total, point, n, rlen;
@@ -1084,13 +1085,13 @@ static int do_mmap_private(struct vm_area_struct *vma,
* shared mappings on devices or memory
* - VM_MAYSHARE will be set if it may attempt to share
*/
- if (vma->vm_file) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
/* shouldn't return success if we're not sharing */
BUG_ON(!(vma->vm_flags & VM_MAYSHARE));
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
@@ -1328,7 +1329,7 @@ unsigned long do_mmap_pgoff(struct file *file,
* - this is the hook for quasi-memory character devices to
* tell us the location of a shared mapping
*/
- if (file && file->f_op->get_unmapped_area) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
addr = file->f_op->get_unmapped_area(file, addr, len,
pgoff, flags);
if (IS_ERR((void *) addr)) {
@@ -1352,15 +1353,17 @@ unsigned long do_mmap_pgoff(struct file *file,
}

vma->vm_region = region;
- add_nommu_region(region);

- /* set up the mapping */
+ /* set up the mapping
+ * - the region is filled in if BDI_CAP_MAP_DIRECT is still set
+ */
if (file && vma->vm_flags & VM_SHARED)
ret = do_mmap_shared_file(vma);
else
- ret = do_mmap_private(vma, region, len);
+ ret = do_mmap_private(vma, region, len, capabilities);
if (ret < 0)
- goto error_put_region;
+ goto error_just_free;
+ add_nommu_region(region);

/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
@@ -1378,19 +1381,6 @@ share:
kleave(" = %lx", result);
return result;

-error_put_region:
- __put_nommu_region(region);
- if (vma) {
- if (vma->vm_file) {
- fput(vma->vm_file);
- if (vma->vm_flags & VM_EXECUTABLE)
- removed_exe_file_vma(vma->vm_mm);
- }
- kmem_cache_free(vm_area_cachep, vma);
- }
- kleave(" = %d [pr]", ret);
- return ret;
-
error_just_free:
up_write(&nommu_region_sem);
error:
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a0de15f..0b3c6cb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2783,7 +2783,8 @@ static void setup_zone_migrate_reserve(struct zone *zone)
{
unsigned long start_pfn, pfn, end_pfn;
struct page *page;
- unsigned long reserve, block_migratetype;
+ unsigned long block_migratetype;
+ int reserve;

/* Get the start pfn, end pfn and the number of blocks to reserve */
start_pfn = zone->zone_start_pfn;
@@ -2791,6 +2792,15 @@ static void setup_zone_migrate_reserve(struct zone *zone)
reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >>
pageblock_order;

+ /*
+ * Reserve blocks are generally in place to help high-order atomic
+ * allocations that are short-lived. A min_free_kbytes value that
+ * would result in more than 2 reserve blocks for atomic allocations
+ * is assumed to be in place to help anti-fragmentation for the
+ * future allocation of hugepages at runtime.
+ */
+ reserve = min(2, reserve);
+
for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) {
if (!pfn_valid(pfn))
continue;
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index da0f64f..f03529c 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -538,7 +538,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
if (level != SOL_AX25)
return -ENOPROTOOPT;

- if (optlen < sizeof(int))
+ if (optlen < (int)sizeof(int))
return -EINVAL;

if (get_user(opt, (int __user *)optval))
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index d22f611..991fe40 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -359,7 +359,7 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
},
.proto = 0,
};
- struct in_device *in_dev = in_dev_get(dev);
+ struct in_device *in_dev = __in_dev_get_rcu(dev);

/* If err equals -EHOSTUNREACH the error is due to a
* martian destination or due to the fact that
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index 133eeae..ce50688 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -266,7 +266,7 @@ static bool ebt_ulog_tg_check(const struct xt_tgchk_param *par)
if (uloginfo->qthreshold > EBT_ULOG_MAX_QLEN)
uloginfo->qthreshold = EBT_ULOG_MAX_QLEN;

- return 0;
+ return true;
}

static struct xt_target ebt_ulog_tg_reg __read_mostly = {
diff --git a/net/can/af_can.c b/net/can/af_can.c
index e733725..264c968 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -199,6 +199,8 @@ static int can_create(struct net *net, struct socket *sock, int protocol)
* @skb: pointer to socket buffer with CAN frame in data section
* @loop: loopback for listeners on local CAN sockets (recommended default!)
*
+ * Due to the loopback this routine must not be called from hardirq context.
+ *
* Return:
* 0 on success
* -ENETDOWN when the selected interface is down
@@ -278,7 +280,7 @@ int can_send(struct sk_buff *skb, int loop)
}

if (newskb)
- netif_rx(newskb);
+ netif_rx_ni(newskb);

/* update statistics */
can_stats.tx_frames++;
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 3229e0a..b6ddd56 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -212,7 +212,7 @@ find_best_ips_proto(struct nf_conntrack_tuple *tuple,
maxip = ntohl(range->max_ip);
j = jhash_2words((__force u32)tuple->src.u3.ip,
range->flags & IP_NAT_RANGE_PERSISTENT ?
- (__force u32)tuple->dst.u3.ip : 0, 0);
+ 0 : (__force u32)tuple->dst.u3.ip, 0);
j = ((u64)j * (maxip - minip + 1)) >> 32;
*var_ipp = htonl(minip + j);
}
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index b5869b9..b8614c6 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1089,14 +1089,14 @@ void nf_conntrack_flush_report(struct net *net, u32 pid, int report)
}
EXPORT_SYMBOL_GPL(nf_conntrack_flush_report);

-static void nf_ct_release_dying_list(void)
+static void nf_ct_release_dying_list(struct net *net)
{
struct nf_conntrack_tuple_hash *h;
struct nf_conn *ct;
struct hlist_nulls_node *n;

spin_lock_bh(&nf_conntrack_lock);
- hlist_nulls_for_each_entry(h, n, &init_net.ct.dying, hnnode) {
+ hlist_nulls_for_each_entry(h, n, &net->ct.dying, hnnode) {
ct = nf_ct_tuplehash_to_ctrack(h);
/* never fails to remove them, no listeners at this point */
nf_ct_kill(ct);
@@ -1115,7 +1115,7 @@ static void nf_conntrack_cleanup_net(struct net *net)
{
i_see_dead_people:
nf_ct_iterate_cleanup(net, kill_all, NULL);
- nf_ct_release_dying_list();
+ nf_ct_release_dying_list(net);
if (atomic_read(&net->ct.count) != 0) {
schedule();
goto i_see_dead_people;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ebe5718..f9f7177 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1836,7 +1836,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv
static int packet_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
- int len;
+ unsigned int len;
int val;
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
@@ -1849,7 +1849,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname,
if (get_user(len, optlen))
return -EFAULT;

- if (len < 0)
+ if ((int)len < 0)
return -EINVAL;

switch (optname) {
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index c29be8f..43300b3 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -105,12 +105,12 @@ as-instr = $(call try-run,\
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)

cc-option = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))

# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)

# cc-option-align
# Prefix align with either -falign or -malign
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 64343cc..86c3896 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -585,7 +585,7 @@ static int prefix_underscores_count(const char *str)
{
const char *tail = str;

- while (*tail != '_')
+ while (*tail == '_')
tail++;

return tail - str;
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 5e17de9..5010952 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -1335,8 +1335,8 @@ static int __cmd_annotate(void)
exit(-1);
}

- if (!force && (stat.st_uid != geteuid())) {
- fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ if (!force && stat.st_uid && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
exit(-1);
}

diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 8b2ec88..b8a75f6 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -1857,8 +1857,8 @@ static int __cmd_report(void)
exit(-1);
}

- if (!force && (stat.st_uid != geteuid())) {
- fprintf(stderr, "file: %s not owned by current user\n", input_name);
+ if (!force && stat.st_uid && (stat.st_uid != geteuid())) {
+ fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
exit(-1);
}

diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
index ddabe92..702083d 100644
--- a/tools/perf/util/module.c
+++ b/tools/perf/util/module.c
@@ -422,7 +422,7 @@ static int mod_dso__load_module_paths(struct mod_dso *self)
len += strlen(uts.release);
len += strlen("/modules.dep");

- path = calloc(1, len);
+ path = calloc(1, len + 1);
if (path == NULL)
goto out_failure;


\
 
 \ /
  Last update: 2009-10-05 19:35    [W:0.210 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site