lkml.org 
[lkml]   [2009]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 01/16] trivial: fix assorted "success" typos
    From b81a0ec27dd1c855362c0af105f0e89623bba52a Mon Sep 17 00:00:00 2001
    From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= <andre.goddard@gmail.com>
    Date: Fri, 30 Oct 2009 03:40:34 -0200
    Subject: [PATCH 01/16] trivial: fix assorted "success" typos
    MIME-Version: 1.0
    Content-Type: text/plain; charset=UTF-8
    Content-Transfer-Encoding: 8bit

    Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>

    diff --git a/Documentation/ABI/testing/procfs-diskstats
    b/Documentation/ABI/testing/procfs-diskstats
    index 9923390..f91a973 100644
    --- a/Documentation/ABI/testing/procfs-diskstats
    +++ b/Documentation/ABI/testing/procfs-diskstats
    @@ -8,7 +8,7 @@ Description:
    1 - major number
    2 - minor mumber
    3 - device name
    - 4 - reads completed succesfully
    + 4 - reads completed successfully
    5 - reads merged
    6 - sectors read
    7 - time spent reading (ms)
    diff --git a/Documentation/ABI/testing/sysfs-block
    b/Documentation/ABI/testing/sysfs-block
    index 5f3beda..d2f9033 100644
    --- a/Documentation/ABI/testing/sysfs-block
    +++ b/Documentation/ABI/testing/sysfs-block
    @@ -4,7 +4,7 @@ Contact: Jerome Marchand <jmarchan@redhat.com>
    Description:
    The /sys/block/<disk>/stat files displays the I/O
    statistics of disk <disk>. They contain 11 fields:
    - 1 - reads completed succesfully
    + 1 - reads completed successfully
    2 - reads merged
    3 - sectors read
    4 - time spent reading (ms)
    diff --git a/Documentation/scsi/ChangeLog.megaraid_sas
    b/Documentation/scsi/ChangeLog.megaraid_sas
    index c851ef4..84524e0 100644
    --- a/Documentation/scsi/ChangeLog.megaraid_sas
    +++ b/Documentation/scsi/ChangeLog.megaraid_sas
    @@ -185,7 +185,7 @@ ii. FW enables WCE bit in Mode Sense cmd for
    drives that are configured
    Disks are exposed with WCE=1. User is advised to enable Write Back
    mode only when the controller has battery backup. At this time
    Synhronize cache is not supported by the FW. Driver will short-cycle
    - the cmd and return sucess without sending down to FW.
    + the cmd and return success without sending down to FW.

    1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
    Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
    diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
    b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
    index 375066a..1e24420 100644
    --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
    +++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
    @@ -83,7 +83,7 @@ typedef struct {
    * @brief Get next available transaction width
    *
    *
    -* @return On sucess : Next avail able transaction width
    +* @return On success : Next avail able transaction width
    * On failure : dmacHw_TRANSACTION_WIDTH_8
    *
    * @note
    diff --git a/arch/arm/mach-bcmring/include/mach/dma.h
    b/arch/arm/mach-bcmring/include/mach/dma.h
    index 847980c..1f2c531 100644
    --- a/arch/arm/mach-bcmring/include/mach/dma.h
    +++ b/arch/arm/mach-bcmring/include/mach/dma.h
    @@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /*
    Stores state information about t
    /**
    * Creates a descriptor ring from a memory mapping.
    *
    -* @return 0 on sucess, error code otherwise.
    +* @return 0 on success, error code otherwise.
    */
    /****************************************************************************/

    diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c
    b/arch/arm/mach-s3c6400/setup-sdhci.c
    index b93dafb..1039937 100644
    --- a/arch/arm/mach-s3c6400/setup-sdhci.c
    +++ b/arch/arm/mach-s3c6400/setup-sdhci.c
    @@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
    [0] = "hsmmc",
    [1] = "hsmmc",
    [2] = "mmc_bus",
    - /* [3] = "48m", - note not succesfully used yet */
    + /* [3] = "48m", - note not successfully used yet */
    };

    void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
    diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c
    b/arch/arm/mach-s3c6410/setup-sdhci.c
    index 20666f3..816d2d9 100644
    --- a/arch/arm/mach-s3c6410/setup-sdhci.c
    +++ b/arch/arm/mach-s3c6410/setup-sdhci.c
    @@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
    [0] = "hsmmc",
    [1] = "hsmmc",
    [2] = "mmc_bus",
    - /* [3] = "48m", - note not succesfully used yet */
    + /* [3] = "48m", - note not successfully used yet */
    };


    diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
    index b53125f..0e30891 100644
    --- a/arch/arm/plat-omap/dma.c
    +++ b/arch/arm/plat-omap/dma.c
    @@ -1232,7 +1232,7 @@ static void create_dma_lch_chain(int lch_head,
    int lch_queue)
    * OMAP_DMA_DYNAMIC_CHAIN
    * @params - Channel parameters
    *
    - * @return - Succes : 0
    + * @return - Success : 0
    * Failure: -EINVAL/-ENOMEM
    */
    int omap_request_dma_chain(int dev_id, const char *dev_name,
    diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
    index 6b7325d..78cb3d3 100644
    --- a/arch/blackfin/kernel/traps.c
    +++ b/arch/blackfin/kernel/traps.c
    @@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)

    /*
    * Similar to get_user, do some address checking, then dereference
    - * Return true on sucess, false on bad address
    + * Return true on success, false on bad address
    */
    static bool get_instruction(unsigned short *val, unsigned short *address)
    {
    diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
    index 6a907c5..cc2108b 100644
    --- a/arch/microblaze/lib/memcpy.c
    +++ b/arch/microblaze/lib/memcpy.c
    @@ -9,7 +9,7 @@
    * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
    * http://www.embedded.com/showArticle.jhtml?articleID=19205567
    *
    - * Attempts were made, unsuccesfully, to contact the original
    + * Attempts were made, unsuccessfully, to contact the original
    * author of this code (Michael Morrow, Intel). Below is the original
    * copyright notice.
    *
    diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
    index d4e9f49..0929198 100644
    --- a/arch/microblaze/lib/memmove.c
    +++ b/arch/microblaze/lib/memmove.c
    @@ -9,7 +9,7 @@
    * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
    * http://www.embedded.com/showArticle.jhtml?articleID=19205567
    *
    - * Attempts were made, unsuccesfully, to contact the original
    + * Attempts were made, unsuccessfully, to contact the original
    * author of this code (Michael Morrow, Intel). Below is the original
    * copyright notice.
    *
    diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
    index 941dc8f..4df851d 100644
    --- a/arch/microblaze/lib/memset.c
    +++ b/arch/microblaze/lib/memset.c
    @@ -9,7 +9,7 @@
    * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
    * http://www.embedded.com/showArticle.jhtml?articleID=19205567
    *
    - * Attempts were made, unsuccesfully, to contact the original
    + * Attempts were made, unsuccessfully, to contact the original
    * author of this code (Michael Morrow, Intel). Below is the original
    * copyright notice.
    *
    diff --git a/arch/powerpc/platforms/powermac/pci.c
    b/arch/powerpc/platforms/powermac/pci.c
    index e81403b..ab2027c 100644
    --- a/arch/powerpc/platforms/powermac/pci.c
    +++ b/arch/powerpc/platforms/powermac/pci.c
    @@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose,
    * 1 -> Skip the device but act as if the access was successfull
    * (return 0xff's on reads, eventually, cache config space
    * accesses in a later version)
    - * -1 -> Hide the device (unsuccessful acess)
    + * -1 -> Hide the device (unsuccessful access)
    */
    static int u3_ht_skip_device(struct pci_controller *hose,
    struct pci_bus *bus, unsigned int devfn)
    diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
    index 98f230f..ad59a92 100644
    --- a/arch/x86/kernel/amd_iommu.c
    +++ b/arch/x86/kernel/amd_iommu.c
    @@ -1635,7 +1635,7 @@ retry:
    goto out;

    /*
    - * aperture was sucessfully enlarged by 128 MB, try
    + * aperture was successfully enlarged by 128 MB, try
    * allocation again
    */
    goto retry;
    diff --git a/block/blk-iopoll.c b/block/blk-iopoll.c
    index ca56420..58916af 100644
    --- a/block/blk-iopoll.c
    +++ b/block/blk-iopoll.c
    @@ -28,7 +28,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_iopoll);
    * Description:
    * Add this blk_iopoll structure to the pending poll list and trigger the
    * raise of the blk iopoll softirq. The driver must already have gotten a
    - * succesful return from blk_iopoll_sched_prep() before calling this.
    + * successful return from blk_iopoll_sched_prep() before calling this.
    **/
    void blk_iopoll_sched(struct blk_iopoll *iop)
    {
    diff --git a/drivers/base/dd.c b/drivers/base/dd.c
    index 979d159..ee95c76 100644
    --- a/drivers/base/dd.c
    +++ b/drivers/base/dd.c
    @@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe);
    * @dev: device to try to bind to the driver
    *
    * This function returns -ENODEV if the device is not registered,
    - * 1 if the device is bound sucessfully and 0 otherwise.
    + * 1 if the device is bound successfully and 0 otherwise.
    *
    * This function must be called with @dev->sem held. When called for a
    * USB interface, @dev->parent->sem must be held as well.
    diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
    index 5f753fc..09ad915 100644
    --- a/drivers/crypto/hifn_795x.c
    +++ b/drivers/crypto/hifn_795x.c
    @@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev)
    dev->dmareg |= HIFN_DMAIER_PUBDONE;
    hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg);

    - dprintk("Chip %s: Public key engine has been sucessfully "
    + dprintk("Chip %s: Public key engine has been successfully "
    "initialised.\n", dev->name);
    }

    diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
    index fddf2b3..d373d17 100644
    --- a/drivers/firewire/core-topology.c
    +++ b/drivers/firewire/core-topology.c
    @@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l)
    * This function builds the tree representation of the topology given
    * by the self IDs from the latest bus reset. During the construction
    * of the tree, the function checks that the self IDs are valid and
    - * internally consistent. On succcess this function returns the
    + * internally consistent. On success this function returns the
    * fw_node corresponding to the local card otherwise NULL.
    */
    static struct fw_node *build_tree(struct fw_card *card,
    diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
    index 5cae0b3..0321889 100644
    --- a/drivers/gpu/drm/drm_crtc.c
    +++ b/drivers/gpu/drm/drm_crtc.c
    @@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct
    drm_device *dev,
    } else if (connector->funcs->set_property)
    ret = connector->funcs->set_property(connector, property, out_resp->value);

    - /* store the property value if succesful */
    + /* store the property value if successful */
    if (!ret)
    drm_connector_property_set_value(connector, property, out_resp->value);
    out:
    diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
    index 1c9410d..bcc2d30 100644
    --- a/drivers/input/serio/hp_sdc.c
    +++ b/drivers/input/serio/hp_sdc.c
    @@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
    INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);

    ret = hp_sdc_init();
    - /* after sucessfull initialization give SDC some time to settle
    + /* after successfull initialization give SDC some time to settle
    * and then load the hp_sdc_mlc upper layer driver */
    if (!ret)
    schedule_delayed_work(&moduleloader_work,
    diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
    index e04bad6..6d4da60 100644
    --- a/drivers/isdn/mISDN/tei.c
    +++ b/drivers/isdn/mISDN/tei.c
    @@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event,
    void *arg)
    if (tm->rcnt == 1) {
    if (*debug & DEBUG_L2_TEI)
    tm->tei_m.printdebug(fi,
    - "check req for tei %d sucessful\n", tm->l2->tei);
    + "check req for tei %d successful\n", tm->l2->tei);
    mISDN_FsmChangeState(fi, ST_TEI_NOP);
    } else if (tm->rcnt > 1) {
    /* duplicate assignment; remove */
    diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h
    b/drivers/media/dvb/dvb-core/dvb_frontend.h
    index 810f07d..52e4ce4 100644
    --- a/drivers/media/dvb/dvb-core/dvb_frontend.h
    +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
    @@ -160,7 +160,7 @@ struct tuner_state {
    * search callback possible return status
    *
    * DVBFE_ALGO_SEARCH_SUCCESS
    - * The frontend search algorithm completed and returned succesfully
    + * The frontend search algorithm completed and returned successfully
    *
    * DVBFE_ALGO_SEARCH_ASLEEP
    * The frontend search algorithm is sleeping
    diff --git a/drivers/media/dvb/frontends/cx24113.c
    b/drivers/media/dvb/frontends/cx24113.c
    index 075b2b5..e9ee555 100644
    --- a/drivers/media/dvb/frontends/cx24113.c
    +++ b/drivers/media/dvb/frontends/cx24113.c
    @@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
    info("detected CX24113 variant\n");
    break;
    case REV_CX24113:
    - info("sucessfully detected\n");
    + info("successfully detected\n");
    break;
    default:
    err("unsupported device id: %x\n", state->rev);
    diff --git a/drivers/media/dvb/frontends/stb0899_drv.c
    b/drivers/media/dvb/frontends/stb0899_drv.c
    index a04c782..1570669 100644
    --- a/drivers/media/dvb/frontends/stb0899_drv.c
    +++ b/drivers/media/dvb/frontends/stb0899_drv.c
    @@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct
    dvb_frontend *fe, struct dvb_fron
    * stb0899_track
    * periodically check the signal level against a specified
    * threshold level and perform derotator centering.
    - * called once we have a lock from a succesful search
    + * called once we have a lock from a successful search
    * event.
    *
    * Will be called periodically called to maintain the
    diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
    index d505b68..e39986a 100644
    --- a/drivers/message/i2o/i2o_block.c
    +++ b/drivers/message/i2o/i2o_block.c
    @@ -940,7 +940,7 @@ static const struct block_device_operations
    i2o_block_fops = {
    * Allocate memory for the i2o_block_device struct, gendisk and request
    * queue and initialize them as far as no additional information is needed.
    *
    - * Returns a pointer to the allocated I2O Block device on succes or a
    + * Returns a pointer to the allocated I2O Block device on success or a
    * negative error code on failure.
    */
    static struct i2o_block_device *i2o_block_device_alloc(void)
    diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
    index 27cf4af..e5ab621 100644
    --- a/drivers/message/i2o/iop.c
    +++ b/drivers/message/i2o/iop.c
    @@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)
    * Removes a previously added pointer from the context list and returns
    * the matching context id.
    *
    - * Returns context id on succes or 0 on failure.
    + * Returns context id on success or 0 on failure.
    */
    u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
    {
    @@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c,
    u32 context)
    * @c: controller to which the context list belong
    * @ptr: pointer to which the context id should be fetched
    *
    - * Returns context id which matches to the pointer on succes or 0 on
    + * Returns context id which matches to the pointer on success or 0 on
    * failure.
    */
    u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
    diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
    index e51c1ed..b126cf8 100644
    --- a/drivers/mtd/nand/diskonchip.c
    +++ b/drivers/mtd/nand/diskonchip.c
    @@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = {
    };

    /* Find the (I)NFTL Media Header, and optionally also the mirror media header.
    - On sucessful return, buf will contain a copy of the media header for
    + On successful return, buf will contain a copy of the media header for
    further processing. id is the string to scan for, and will presumably be
    either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
    header. The page #s of the found media headers are placed in mh0_page and
    diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
    index 11dc7e6..68b5b3a 100644
    --- a/drivers/mtd/nand/s3c2410.c
    +++ b/drivers/mtd/nand/s3c2410.c
    @@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct
    s3c2410_nand_info *info,
    * @info: The controller instance.
    * @nmtd: The driver version of the MTD instance.
    *
    - * This routine is called after the chip probe has succesfully completed
    + * This routine is called after the chip probe has successfully completed
    * and the relevant per-chip information updated. This call ensure that
    * we update the internal state accordingly.
    *
    diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
    index 1f941f0..02a0908 100644
    --- a/drivers/net/benet/be_main.c
    +++ b/drivers/net/benet/be_main.c
    @@ -1876,7 +1876,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
    goto fw_exit;
    }

    - dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
    + dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");

    fw_exit:
    release_firmware(fw);
    diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
    index d1e0563..61c083a 100644
    --- a/drivers/net/e1000e/82571.c
    +++ b/drivers/net/e1000e/82571.c
    @@ -1412,7 +1412,7 @@ static s32
    e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
    case e1000_serdes_link_autoneg_progress:
    /*
    * If the LU bit is set in the STATUS register,
    - * autoneg has completed sucessfully. If not,
    + * autoneg has completed successfully. If not,
    * try foring the link because the far end may be
    * available but not capable of autonegotiation.
    */
    diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
    index 99ba2b8..b065ba4 100644
    --- a/drivers/net/e1000e/lib.c
    +++ b/drivers/net/e1000e/lib.c
    @@ -571,7 +571,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
    if (!(rxcw & E1000_RXCW_IV)) {
    mac->serdes_has_link = true;
    hw_dbg(hw, "SERDES: Link up - autoneg "
    - "completed sucessfully.\n");
    + "completed successfully.\n");
    } else {
    mac->serdes_has_link = false;
    hw_dbg(hw, "SERDES: Link down - invalid"
    diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
    index d768852..75b099c 100644
    --- a/drivers/net/ehea/ehea_ethtool.c
    +++ b/drivers/net/ehea/ehea_ethtool.c
    @@ -118,7 +118,7 @@ doit:
    ret = ehea_set_portspeed(port, sp);

    if (!ret)
    - ehea_info("%s: Port speed succesfully set: %dMbps "
    + ehea_info("%s: Port speed successfully set: %dMbps "
    "%s Duplex",
    port->netdev->name, port->port_speed,
    port->full_duplex == 1 ? "Full" : "Half");
    @@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev)
    ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);

    if (!ret)
    - ehea_info("%s: Port speed succesfully set: %dMbps "
    + ehea_info("%s: Port speed successfully set: %dMbps "
    "%s Duplex",
    port->netdev->name, port->port_speed,
    port->full_duplex == 1 ? "Full" : "Half");
    diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
    index 4376147..82c3ebc 100644
    --- a/drivers/net/mlx4/mlx4_en.h
    +++ b/drivers/net/mlx4/mlx4_en.h
    @@ -162,7 +162,7 @@ enum {
    #define MLX4_EN_DEF_RX_PAUSE 1
    #define MLX4_EN_DEF_TX_PAUSE 1

    -/* Interval between sucessive polls in the Tx routine when polling is used
    +/* Interval between successive polls in the Tx routine when polling is used
    instead of interrupts (in per-core Tx rings) - should be power of 2 */
    #define MLX4_EN_TX_POLL_MODER 16
    #define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4)
    diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
    index b211613..86fde1a 100644
    --- a/drivers/net/ps3_gelic_net.c
    +++ b/drivers/net/ps3_gelic_net.c
    @@ -296,7 +296,7 @@ static void gelic_card_reset_chain(struct gelic_card *card,
    * @card: card structure
    * @descr: descriptor to re-init
    *
    - * return 0 on succes, <0 on failure
    + * return 0 on success, <0 on failure
    *
    * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
    * Activate the descriptor state-wise
    diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
    index c049364..70c1232 100644
    --- a/drivers/net/sfc/falcon.c
    +++ b/drivers/net/sfc/falcon.c
    @@ -1264,7 +1264,7 @@ int falcon_flush_queues(struct efx_nic *efx)
    msleep(FALCON_FLUSH_INTERVAL);
    falcon_poll_flush_events(efx);

    - /* Check if every queue has been succesfully flushed */
    + /* Check if every queue has been successfully flushed */
    outstanding = false;
    efx_for_each_tx_queue(tx_queue, efx)
    outstanding |= !tx_queue->flushed;
    diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
    index ccdd196..4a00940 100644
    --- a/drivers/net/smsc911x.c
    +++ b/drivers/net/smsc911x.c
    @@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev)
    SMSC_TRACE(HW, "Passed Loop Back Test");
    #endif /* USE_PHY_WORK_AROUND */

    - SMSC_TRACE(HW, "phy initialised succesfully");
    + SMSC_TRACE(HW, "phy initialised successfully");
    return 0;
    }

    diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
    index b5716bd..016360c 100644
    --- a/drivers/net/smsc911x.h
    +++ b/drivers/net/smsc911x.h
    @@ -30,7 +30,7 @@
    #define SMSC_NAPI_WEIGHT 16

    /* implements a PHY loopback test at initialisation time, to ensure a packet
    - * can be succesfully looped back */
    + * can be successfully looped back */
    #define USE_PHY_WORK_AROUND

    #define DPRINTK(nlevel, klevel, fmt, args...) \
    diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
    index 90e663f..40b51e6 100644
    --- a/drivers/net/spider_net.c
    +++ b/drivers/net/spider_net.c
    @@ -409,7 +409,7 @@ spider_net_free_rx_chain_contents(struct
    spider_net_card *card)
    * @card: card structure
    * @descr: descriptor to re-init
    *
    - * Return 0 on succes, <0 on failure.
    + * Return 0 on success, <0 on failure.
    *
    * Allocates a new rx skb, iommu-maps it and attaches it to the
    * descriptor. Mark the descriptor as activated, ready-to-use.
    diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
    index 03a6ca0..a007e2a 100644
    --- a/drivers/net/ucc_geth.h
    +++ b/drivers/net/ucc_geth.h
    @@ -80,16 +80,16 @@ struct ucc_geth {
    frames) received that were between 128
    (Including FCS length==4) and 255 octets */
    u32 txok; /* Total number of octets residing in frames
    - that where involved in succesfull
    + that where involved in successfull
    transmission */
    u16 txcf; /* Total number of PAUSE control frames
    transmitted by this MAC */
    u8 res4[0x2];
    u32 tmca; /* Total number of frames that were transmitted
    - succesfully with the group address bit set
    + successfully with the group address bit set
    that are not broadcast frames */
    u32 tbca; /* Total number of frames transmitted
    - succesfully that had destination address
    + successfully that had destination address
    field equal to the broadcast address */
    u32 rxfok; /* Total number of frames received OK */
    u32 rxbok; /* Total number of octets received OK */
    @@ -98,9 +98,9 @@ struct ucc_geth {
    HW because it includes octets in frames that
    never even reach the UCC */
    u32 rmca; /* Total number of frames that were received
    - succesfully with the group address bit set
    + successfully with the group address bit set
    that are not broadcast frames */
    - u32 rbca; /* Total number of frames received succesfully
    + u32 rbca; /* Total number of frames received successfully
    that had destination address equal to the
    broadcast address */
    u32 scar; /* Statistics carry register */
    @@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics {
    frames) received that were between 128
    (Including FCS length==4) and 255 octets */
    u32 txok; /* Total number of octets residing in frames
    - that where involved in succesfull
    + that where involved in successfull
    transmission */
    u16 txcf; /* Total number of PAUSE control frames
    transmitted by this MAC */
    u32 tmca; /* Total number of frames that were transmitted
    - succesfully with the group address bit set
    + successfully with the group address bit set
    that are not broadcast frames */
    u32 tbca; /* Total number of frames transmitted
    - succesfully that had destination address
    + successfully that had destination address
    field equal to the broadcast address */
    u32 rxfok; /* Total number of frames received OK */
    u32 rxbok; /* Total number of octets received OK */
    @@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics {
    HW because it includes octets in frames that
    never even reach the UCC */
    u32 rmca; /* Total number of frames that were received
    - succesfully with the group address bit set
    + successfully with the group address bit set
    that are not broadcast frames */
    - u32 rbca; /* Total number of frames received succesfully
    + u32 rbca; /* Total number of frames received successfully
    that had destination address equal to the
    broadcast address */
    } __attribute__ ((packed));
    diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
    index c6c9222..0c3c738 100644
    --- a/drivers/net/usb/smsc95xx.c
    +++ b/drivers/net/usb/smsc95xx.c
    @@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
    mii_nway_restart(&dev->mii);

    if (netif_msg_ifup(dev))
    - devdbg(dev, "phy initialised succesfully");
    + devdbg(dev, "phy initialised successfully");
    return 0;
    }

    diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
    index 07c32e6..99d2747 100644
    --- a/drivers/net/wimax/i2400m/rx.c
    +++ b/drivers/net/wimax/i2400m/rx.c
    @@ -1114,7 +1114,7 @@ error:
    * device. See the file header for the format. Run all checks on the
    * buffer header, then run over each payload's descriptors, verify
    * their consistency and act on each payload's contents. If
    - * everything is succesful, update the device's statistics.
    + * everything is successful, update the device's statistics.
    *
    * Note: You need to set the skb to contain only the length of the
    * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
    diff --git a/drivers/net/wireless/ath/ath9k/rc.c
    b/drivers/net/wireless/ath/ath9k/rc.c
    index 16a2717..2d3b4e7 100644
    --- a/drivers/net/wireless/ath/ath9k/rc.c
    +++ b/drivers/net/wireless/ath/ath9k/rc.c
    @@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
    * Since this probe succeeded, we allow the next
    * probe twice as soon. This allows the maxRate
    * to move up faster if the probes are
    - * succesful.
    + * successful.
    */
    ath_rc_priv->probe_time =
    now_msec - rate_table->probe_interval / 2;
    diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c
    b/drivers/net/wireless/rt2x00/rt2x00usb.c
    index 5015448..422288b 100644
    --- a/drivers/net/wireless/rt2x00/rt2x00usb.c
    +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
    @@ -193,7 +193,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
    * Obtain the status about this packet.
    * Note that when the status is 0 it does not mean the
    * frame was send out correctly. It only means the frame
    - * was succesfully pushed to the hardware, we have no
    + * was successfully pushed to the hardware, we have no
    * way to determine the transmission status right now.
    * (Only indirectly by looking at the failed TX counters
    * in the register).
    diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c
    b/drivers/net/wireless/zd1211rw/zd_mac.c
    index 6d66635..2b7f965 100644
    --- a/drivers/net/wireless/zd1211rw/zd_mac.c
    +++ b/drivers/net/wireless/zd1211rw/zd_mac.c
    @@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw,
    struct sk_buff *skb,
    * zd_mac_tx_failed - callback for failed frames
    * @dev: the mac80211 wireless device
    *
    - * This function is called if a frame couldn't be succesfully be
    + * This function is called if a frame couldn't be successfully be
    * transferred. The first frame from the tx queue, will be selected and
    * reported as error to the upper layers.
    */
    diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
    index 097d384..f54b1ee 100644
    --- a/drivers/s390/char/fs3270.c
    +++ b/drivers/s390/char/fs3270.c
    @@ -74,7 +74,7 @@ fs3270_do_io(struct raw3270_view *view, struct
    raw3270_request *rq)
    }
    rc = raw3270_start(view, rq);
    if (rc == 0) {
    - /* Started sucessfully. Now wait for completion. */
    + /* Started successfully. Now wait for completion. */
    wait_event(fp->wait, raw3270_request_final(rq));
    }
    } while (rc == -EACCES);
    diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
    index 8ab5160..c268a2e 100644
    --- a/drivers/s390/cio/chp.c
    +++ b/drivers/s390/cio/chp.c
    @@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id
    chpid, int onoff)
    chpid_to_chp(chpid)->state = onoff;
    }

    -/* On succes return 0 if channel-path is varied offline, 1 if it is varied
    +/* On success return 0 if channel-path is varied offline, 1 if it is varied
    * online. Return -ENODEV if channel-path is not registered. */
    int chp_get_status(struct chp_id chpid)
    {
    diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
    index 58bc175..da2bcec 100644
    --- a/drivers/scsi/aic7xxx/aic79xx.seq
    +++ b/drivers/scsi/aic7xxx/aic79xx.seq
    @@ -217,7 +217,7 @@ BEGIN_CRITICAL;
    scbdma_tohost_done:
    test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone;
    /*
    - * An SCB has been succesfully uploaded to the host.
    + * An SCB has been successfully uploaded to the host.
    * If the SCB was uploaded for some reason other than
    * bad SCSI status (currently only for underruns), we
    * queue the SCB for normal completion. Otherwise, we
    diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c
    b/drivers/scsi/aic7xxx/aic79xx_core.c
    index 63b521d..4d419c1 100644
    --- a/drivers/scsi/aic7xxx/aic79xx_core.c
    +++ b/drivers/scsi/aic7xxx/aic79xx_core.c
    @@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
    /*
    * Although the driver does not care about the
    * 'Selection in Progress' status bit, the busy
    - * LED does. SELINGO is only cleared by a sucessfull
    + * LED does. SELINGO is only cleared by a successfull
    * selection, so we must manually clear it to insure
    * the LED turns off just incase no future successful
    * selections occur (e.g. no devices on the bus).
    diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c
    b/drivers/scsi/aic7xxx/aic7xxx_core.c
    index 8dfb59d..45aa728 100644
    --- a/drivers/scsi/aic7xxx/aic7xxx_core.c
    +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
    @@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
    /*
    * Although the driver does not care about the
    * 'Selection in Progress' status bit, the busy
    - * LED does. SELINGO is only cleared by a sucessfull
    + * LED does. SELINGO is only cleared by a successfull
    * selection, so we must manually clear it to insure
    * the LED turns off just incase no future successful
    * selections occur (e.g. no devices on the bus).
    diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
    index bd2f771..6486ae4 100644
    --- a/drivers/scsi/libfc/fc_lport.c
    +++ b/drivers/scsi/libfc/fc_lport.c
    @@ -56,7 +56,7 @@
    * at the same time.
    *
    * When discovery succeeds or fails a callback is made to the lport as
    - * notification. Currently, succesful discovery causes the lport to take no
    + * notification. Currently, successful discovery causes the lport to take no
    * action. A failure will cause the lport to reset. There is likely a circular
    * locking problem with this implementation.
    */
    diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
    index 2e0746d..ca25ee5 100644
    --- a/drivers/scsi/libiscsi_tcp.c
    +++ b/drivers/scsi/libiscsi_tcp.c
    @@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info
    *iscsi_tcp_get_curr_r2t(struct iscsi_task *task)
    * iscsi_tcp_task_xmit - xmit normal PDU task
    * @task: iscsi command task
    *
    - * We're expected to return 0 when everything was transmitted succesfully,
    + * We're expected to return 0 when everything was transmitted successfully,
    * -EAGAIN if there's still data in the queue, or != 0 for any other kind
    * of error.
    */
    diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
    index e1a30a1..9bd19aa 100644
    --- a/drivers/scsi/lpfc/lpfc_attr.c
    +++ b/drivers/scsi/lpfc/lpfc_attr.c
    @@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
    * Notes:
    * Assumes any error from lpfc_selective_reset() will be negative.
    * If lpfc_selective_reset() returns zero then the length of the buffer
    - * is returned which indicates succcess
    + * is returned which indicates success
    *
    * Returns:
    * -EINVAL if the buffer does not contain the string "selective"
    @@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct
    bin_attribute *bin_attr,
    * sysfs_ctlreg_read - Read method for reading from ctlreg
    * @kobj: kernel kobject that contains the kernel class device.
    * @bin_attr: kernel attributes passed to us.
    - * @buf: if succesful contains the data from the adapter IOREG space.
    + * @buf: if successful contains the data from the adapter IOREG space.
    * @off: offset into buffer to beginning of data.
    * @count: bytes to transfer.
    *
    diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
    index b31ff7f..30200ee 100644
    --- a/drivers/scsi/lpfc/lpfc_els.c
    +++ b/drivers/scsi/lpfc/lpfc_els.c
    @@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct
    lpfc_iocbq *cmdiocb,

    /* FLOGI completes successfully */
    lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
    - "0101 FLOGI completes sucessfully "
    + "0101 FLOGI completes successfully "
    "Data: x%x x%x x%x x%x\n",
    irsp->un.ulpWord[4], sp->cmn.e_d_tov,
    sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution);
    @@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport,
    struct lpfc_iocbq *cmdiocb,
    /* Indicate we are walking fc_rscn_id_list on this vport */
    vport->fc_rscn_flush = 1;
    spin_unlock_irq(shost->host_lock);
    - /* Get the array count after sucessfully have the token */
    + /* Get the array count after successfully have the token */
    rscn_cnt = vport->fc_rscn_id_cnt;
    /* If we are already processing an RSCN, save the received
    * RSCN payload buffer, cmdiocb->context2 to process later.
    diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
    index 562d8ce..82f8ab5 100644
    --- a/drivers/scsi/lpfc/lpfc_init.c
    +++ b/drivers/scsi/lpfc/lpfc_init.c
    @@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
    * down the SLI Layer.
    *
    * Return codes
    - * 0 - sucess.
    + * 0 - success.
    * Any other value - error.
    **/
    static int
    @@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba)
    * down the SLI Layer.
    *
    * Return codes
    - * 0 - sucess.
    + * 0 - success.
    * Any other value - error.
    **/
    static int
    @@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)
    * uninitialization after the HBA is reset when bring down the SLI Layer.
    *
    * Return codes
    - * 0 - sucess.
    + * 0 - success.
    * Any other value - error.
    **/
    int
    @@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
    * routine from the API jump table function pointer from the lpfc_hba struct.
    *
    * Return codes
    - * 0 - sucess.
    + * 0 - success.
    * Any other value - error.
    **/
    void
    @@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba
    *phba, uint32_t intr_mode)
    * PCI devices.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba)
    * support the SLI-3 HBA device it attached to.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
    * support the SLI-4 HBA device it attached to.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba,
    uint8_t dev_grp)
    * device specific resource setup to support the HBA device it attached to.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
    * device specific resource setup to support the HBA device it attached to.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba)
    * list and set up the IOCB tag array accordingly.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba)
    * list and set up the sgl xritag tag array accordingly.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -3986,7 +3986,7 @@ out_free_mem:
    * enabled and the driver is reinitializing the device.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
    * PCI device data structure is set.
    *
    * Return codes
    - * pointer to @phba - sucessful
    + * pointer to @phba - successful
    * NULL - error
    **/
    static struct lpfc_hba *
    @@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba)
    * host with it.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba)
    * with SLI-3 interface spec.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba
    *phba, uint32_t vf)
    * this routine.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - could not allocated memory.
    **/
    static int
    @@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
    * allocation for the port.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
    * HBA consistent with the SLI-4 interface spec.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
    * we just use some constant number as place holder.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -5218,7 +5218,7 @@ out_error:
    * operation.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
    * operation.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -5552,7 +5552,7 @@ out_error:
    * operation.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
    * Later, this can be used for all the slow-path events.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * -ENOMEM - No availble memory
    **/
    static int
    @@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
    * all resources assigned to the PCI function which originates this request.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No availble memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
    * with SLI-4 interface spec.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
    * will be left with MSI-X enabled and leaks its vectors.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba)
    * is done in this function.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    */
    static int
    @@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba)
    * MSI-X -> MSI -> IRQ.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static uint32_t
    @@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
    * enabled and leaks its vectors.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba)
    * which is done in this function.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static int
    @@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba)
    * MSI-X -> MSI -> IRQ.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * other values - error
    **/
    static uint32_t
    diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
    index 43cbe33..0a4bcac 100644
    --- a/drivers/scsi/lpfc/lpfc_sli.c
    +++ b/drivers/scsi/lpfc/lpfc_sli.c
    @@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
    * addition, this routine gets the port vpd data.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - could not allocated memory.
    **/
    static int
    @@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
    * sequential.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * EIO - The mailbox failed to complete successfully.
    * When this error occurs, the driver is not guaranteed
    * to have any rpi regions posted to the device and
    @@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
    * maps up to 64 rpi context regions.
    *
    * Return codes
    - * 0 - sucessful
    + * 0 - successful
    * ENOMEM - No available memory
    * EIO - The mailbox failed to complete successfully.
    **/
    @@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba,
    struct lpfc_rpi_hdr *rpi_page)
    * PAGE_SIZE modulo 64 rpi context headers.
    *
    * Returns
    - * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
    + * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
    * LPFC_RPI_ALLOC_ERROR if no rpis are available.
    **/
    int
    diff --git a/drivers/scsi/megaraid/megaraid_mbox.c
    b/drivers/scsi/megaraid/megaraid_mbox.c
    index 234f0b7..f9ae803 100644
    --- a/drivers/scsi/megaraid/megaraid_mbox.c
    +++ b/drivers/scsi/megaraid/megaraid_mbox.c
    @@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
    }
    else {
    con_log(CL_ANN, (KERN_NOTICE
    - "megaraid mbox: reset sequence completed sucessfully\n"));
    + "megaraid mbox: reset sequence completed successfully\n"));
    }


    diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
    b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
    index 86ab32d..756e509 100644
    --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
    +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
    @@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer,
    struct sense_info *data)

    #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
    /**
    - * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
    + * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
    * @ioc: per adapter object
    * @scmd: pointer to scsi command object
    * @mpi_reply: reply mf payload returned from firmware
    diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
    index f7c70e2..d3d39f8 100644
    --- a/drivers/scsi/pmcraid.c
    +++ b/drivers/scsi/pmcraid.c
    @@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct
    file *filep, int mode)
    * @direction : data transfer direction
    *
    * Return value
    - * 0 on sucess, non-zero error code on failure
    + * 0 on success, non-zero error code on failure
    */
    static int pmcraid_build_passthrough_ioadls(
    struct pmcraid_cmd *cmd,
    @@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls(
    * @direction: data transfer direction
    *
    * Return value
    - * 0 on sucess, non-zero error code on failure
    + * 0 on success, non-zero error code on failure
    */
    static void pmcraid_release_passthrough_ioadls(
    struct pmcraid_cmd *cmd,
    @@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls(
    * @arg: pointer to pmcraid_passthrough_buffer user buffer
    *
    * Return value
    - * 0 on sucess, non-zero error code on failure
    + * 0 on success, non-zero error code on failure
    */
    static long pmcraid_ioctl_passthrough(
    struct pmcraid_instance *pinstance,
    diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
    index 723fdec..0fd6ae6 100644
    --- a/drivers/scsi/scsi_netlink.c
    +++ b/drivers/scsi/scsi_netlink.c
    @@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg);
    * @data_buf: pointer to vendor unique data buffer
    *
    * Returns:
    - * 0 on succesful return
    + * 0 on successful return
    * otherwise, failing error code
    *
    * Notes:
    diff --git a/drivers/scsi/scsi_transport_sas.c
    b/drivers/scsi/scsi_transport_sas.c
    index fd47cb1..f27e52d 100644
    --- a/drivers/scsi/scsi_transport_sas.c
    +++ b/drivers/scsi/scsi_transport_sas.c
    @@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add);
    *
    * Note:
    * This function must only be called on a PHY that has not
    - * sucessfully been added using sas_phy_add().
    + * successfully been added using sas_phy_add().
    */
    void sas_phy_free(struct sas_phy *phy)
    {
    @@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add);
    *
    * Note:
    * This function must only be called on a PORT that has not
    - * sucessfully been added using sas_port_add().
    + * successfully been added using sas_port_add().
    */
    void sas_port_free(struct sas_port *port)
    {
    @@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add);
    *
    * Note:
    * This function must only be called on a remote
    - * PHY that has not sucessfully been added using
    + * PHY that has not successfully been added using
    * sas_rphy_add() (or has been sas_rphy_remove()'d)
    */
    void sas_rphy_free(struct sas_rphy *rphy)
    diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c
    b/drivers/scsi/sym53c8xx_2/sym_glue.c
    index 45374d6..2b38f6a 100644
    --- a/drivers/scsi/sym53c8xx_2/sym_glue.c
    +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
    @@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct
    pci_dev *pdev)
    *
    * This routine is similar to sym_set_workarounds(), except
    * that, at this point, we already know that the device was
    - * succesfully intialized at least once before, and so most
    + * successfully intialized at least once before, and so most
    * of the steps taken there are un-needed here.
    */
    static void sym2_reset_workarounds(struct pci_dev *pdev)
    diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
    index 0c08f28..46de564 100644
    --- a/drivers/serial/ucc_uart.c
    +++ b/drivers/serial/ucc_uart.c
    @@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
    * This function will attempt to stuff of all the characters from the
    * kernel's transmit buffer into TX BDs.
    *
    - * A return value of non-zero indicates that it sucessfully stuffed all
    + * A return value of non-zero indicates that it successfully stuffed all
    * characters from the kernel buffer.
    *
    * A return value of zero indicates that there are still characters in the
    diff --git a/drivers/staging/altpciechdma/altpciechdma.c
    b/drivers/staging/altpciechdma/altpciechdma.c
    index e0c5ba4..2f07dd4 100644
    --- a/drivers/staging/altpciechdma/altpciechdma.c
    +++ b/drivers/staging/altpciechdma/altpciechdma.c
    @@ -212,7 +212,7 @@ struct ape_dev {
    int msi_enabled;
    /* whether this driver could obtain the regions */
    int got_regions;
    - /* irq line succesfully requested by this driver, -1 otherwise */
    + /* irq line successfully requested by this driver, -1 otherwise */
    int irq_line;
    /* board revision */
    u8 revision;
    @@ -336,7 +336,7 @@ static int __devinit map_bars(struct ape_dev *ape,
    struct pci_dev *dev)
    printk(KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu(/%lu).\n", i,
    ape->bar[i], bar_min_len[i], bar_length);
    }
    - /* succesfully mapped all required BAR regions */
    + /* successfully mapped all required BAR regions */
    rc = 0;
    goto success;
    fail:
    @@ -911,7 +911,7 @@ static int __devinit probe(struct pci_dev *dev,
    const struct pci_device_id *id)
    /* perform DMA engines loop back test */
    rc = dma_test(ape, dev);
    (void)rc;
    - /* succesfully took the device */
    + /* successfully took the device */
    rc = 0;
    printk(KERN_DEBUG "probe() successful.\n");
    goto end;
    diff --git a/drivers/staging/comedi/drivers/me4000.c
    b/drivers/staging/comedi/drivers/me4000.c
    index 6079913..8b9fa0f 100644
    --- a/drivers/staging/comedi/drivers/me4000.c
    +++ b/drivers/staging/comedi/drivers/me4000.c
    @@ -840,7 +840,7 @@ static int xilinx_download(struct comedi_device *dev)
    "comedi%d: me4000: xilinx_download(): DONE flag is not set\n",
    dev->minor);
    printk(KERN_ERR
    - "comedi%d: me4000: xilinx_download(): Download not succesful\n",
    + "comedi%d: me4000: xilinx_download(): Download not successful\n",
    dev->minor);
    return -EIO;
    }
    diff --git a/drivers/staging/dst/export.c b/drivers/staging/dst/export.c
    index 4fbd848..a4ed16c 100644
    --- a/drivers/staging/dst/export.c
    +++ b/drivers/staging/dst/export.c
    @@ -202,7 +202,7 @@ err_out_exit:
    * so to play good with all cases we just queue BIO into the queue
    * and wake up processing thread, which gets completed request and
    * send (encrypting if needed) it back to the client (if it was a read
    - * request), or sends back reply that writing succesfully completed.
    + * request), or sends back reply that writing successfully completed.
    */
    static int dst_export_process_request_queue(struct dst_state *st)
    {
    diff --git a/drivers/staging/hv/hv_api.h b/drivers/staging/hv/hv_api.h
    index 251e2d1..9eb818e 100644
    --- a/drivers/staging/hv/hv_api.h
    +++ b/drivers/staging/hv/hv_api.h
    @@ -316,13 +316,13 @@

    /*
    * HV_STATUS_VMX_INSTRUCTION_FAILED
    - * The requested VMX instruction failed to complete succesfully.
    + * The requested VMX instruction failed to complete successfully.
    */
    #define HV_STATUS_VMX_INSTRUCTION_FAILED ((u16)0x1011)

    /*
    * HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS
    - * The requested VMX instruction failed to complete succesfully indicating
    + * The requested VMX instruction failed to complete successfully indicating
    * status.
    */
    #define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((u16)0x1012)
    diff --git a/drivers/staging/octeon/cvmx-pow.h
    b/drivers/staging/octeon/cvmx-pow.h
    index c5d66f2..bf9e069 100644
    --- a/drivers/staging/octeon/cvmx-pow.h
    +++ b/drivers/staging/octeon/cvmx-pow.h
    @@ -1959,7 +1959,7 @@ static inline uint32_t
    cvmx_pow_tag_get_hw_bits(uint64_t tag)
    * @buffer_size:
    * The size of the supplied buffer
    *
    - * Returns Zero on sucess, negative on failure
    + * Returns Zero on success, negative on failure
    */
    extern int cvmx_pow_capture(void *buffer, int buffer_size);

    diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c
    b/drivers/staging/quatech_usb2/quatech_usb2.c
    index 2acef94..81877e7 100644
    --- a/drivers/staging/quatech_usb2/quatech_usb2.c
    +++ b/drivers/staging/quatech_usb2/quatech_usb2.c
    @@ -1670,7 +1670,7 @@ __func__);
    dbg("%s(): failed resubmitting read urb, error %d",
    __func__, result);
    } else {
    - dbg("%s() sucessfully resumitted read urb", __func__);
    + dbg("%s() successfully resumitted read urb", __func__);
    if (tty_st && RxCount) {
    /* if some inbound data was processed, then
    * we need to push that through the tty layer
    diff --git a/drivers/staging/rar/rar_driver.c b/drivers/staging/rar/rar_driver.c
    index 9805d74..24700b1 100644
    --- a/drivers/staging/rar/rar_driver.c
    +++ b/drivers/staging/rar/rar_driver.c
    @@ -66,7 +66,7 @@ static int __init rar_init_handler(void);
    static void __exit rar_exit_handler(void);

    /*
    - function that is activated on the succesfull probe of the RAR device
    + function that is activated on the successfull probe of the RAR device
    */
    static int __devinit rar_probe(struct pci_dev *pdev, const struct
    pci_device_id *ent);

    @@ -319,7 +319,7 @@ static int memrar_init_rar_params(struct pci_dev *pdev)
    }

    /*
    - function that is activaed on the succesfull probe of the RAR device
    + function that is activaed on the successfull probe of the RAR device
    */
    static int __devinit rar_probe(struct pci_dev *pdev, const struct
    pci_device_id *ent)
    {
    diff --git a/drivers/staging/rt2860/common/rtmp_init.c
    b/drivers/staging/rt2860/common/rtmp_init.c
    index 20c2ce2..0e10e23 100644
    --- a/drivers/staging/rt2860/common/rtmp_init.c
    +++ b/drivers/staging/rt2860/common/rtmp_init.c
    @@ -2691,7 +2691,7 @@ VOID NICUpdateFifoStaCounters(

    pEntry->FIFOCount = 0;
    pEntry->OneSecTxNoRetryOkCount++;
    - // update NoDataIdleCount when sucessful send packet to STA.
    + // update NoDataIdleCount when successful send packet to STA.
    pEntry->NoDataIdleCount = 0;
    pEntry->ContinueTxFailCnt = 0;
    }
    diff --git a/drivers/staging/rt2860/sta/connect.c
    b/drivers/staging/rt2860/sta/connect.c
    index 7bc75ab..0dae822 100644
    --- a/drivers/staging/rt2860/sta/connect.c
    +++ b/drivers/staging/rt2860/sta/connect.c
    @@ -58,8 +58,8 @@ UCHAR CipherSuiteWpaNoneAes[] = {
    };
    UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) /
    sizeof(UCHAR));

    -// The following MACRO is called after 1. starting an new IBSS, 2.
    succesfully JOIN an IBSS,
    -// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
    +// The following MACRO is called after 1. starting an new IBSS, 2.
    successfully JOIN an IBSS,
    +// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
    // All settings successfuly negotiated furing MLME state machines
    become final settings
    // and are copied to pAd->StaActive
    #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)
    \
    diff --git a/drivers/staging/rt2860/sta/rtmp_data.c
    b/drivers/staging/rt2860/sta/rtmp_data.c
    index f751ab6..6df1fe2 100644
    --- a/drivers/staging/rt2860/sta/rtmp_data.c
    +++ b/drivers/staging/rt2860/sta/rtmp_data.c
    @@ -898,7 +898,7 @@ Arguments:
    pPacket Pointer to send packet

    Return Value:
    - NDIS_STATUS_SUCCESS If succes to queue the packet into TxSwQueue.
    + NDIS_STATUS_SUCCESS If success to queue the packet into TxSwQueue.
    NDIS_STATUS_FAILURE If failed to do en-queue.

    Note:
    diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c
    index 8c34e39..dc3e6e2 100644
    --- a/drivers/staging/rt2860/sta/wpa.c
    +++ b/drivers/staging/rt2860/sta/wpa.c
    @@ -276,7 +276,7 @@ VOID WpaEAPOLKeyAction(
    DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
    }

    - // We will assume link is up (assoc suceess and port not secured).
    + // We will assume link is up (assoc success and port not secured).
    // All state has to be able to process message from previous state
    switch(pAd->StaCfg.WpaState)
    {
    @@ -366,7 +366,7 @@ VOID WpaEAPOLKeyAction(
    DBGPRINT(RT_DEBUG_TRACE, ("Receive EAPOL Key Group Message 1\n"));
    }

    - // We will assume link is up (assoc suceess and port not secured).
    + // We will assume link is up (assoc success and port not secured).
    // All state has to be able to process message from previous state
    switch(pAd->StaCfg.WpaState)
    {
    diff --git a/drivers/staging/rt3090/common/rtmp_init.c
    b/drivers/staging/rt3090/common/rtmp_init.c
    index 48b95b7..04b54fc 100644
    --- a/drivers/staging/rt3090/common/rtmp_init.c
    +++ b/drivers/staging/rt3090/common/rtmp_init.c
    @@ -2111,7 +2111,7 @@ VOID NICUpdateFifoStaCounters(
    #endif // DOT11_N_SUPPORT //
    pEntry->FIFOCount = 0;
    pEntry->OneSecTxNoRetryOkCount++;
    - // update NoDataIdleCount when sucessful send packet to STA.
    + // update NoDataIdleCount when successful send packet to STA.
    pEntry->NoDataIdleCount = 0;
    pEntry->ContinueTxFailCnt = 0;
    #ifdef WDS_SUPPORT
    diff --git a/drivers/staging/rt3090/sta/connect.c
    b/drivers/staging/rt3090/sta/connect.c
    index 4aa35ee..583d6ee 100644
    --- a/drivers/staging/rt3090/sta/connect.c
    +++ b/drivers/staging/rt3090/sta/connect.c
    @@ -60,8 +60,8 @@ UCHAR CipherSuiteWpaNoneAes[] = {
    };
    UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) /
    sizeof(UCHAR));

    -// The following MACRO is called after 1. starting an new IBSS, 2.
    succesfully JOIN an IBSS,
    -// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
    +// The following MACRO is called after 1. starting an new IBSS, 2.
    successfully JOIN an IBSS,
    +// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
    // All settings successfuly negotiated furing MLME state machines
    become final settings
    // and are copied to pAd->StaActive
    #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)
    \
    diff --git a/drivers/staging/rt3090/sta/rtmp_data.c
    b/drivers/staging/rt3090/sta/rtmp_data.c
    index 5591364..c1b83be 100644
    --- a/drivers/staging/rt3090/sta/rtmp_data.c
    +++ b/drivers/staging/rt3090/sta/rtmp_data.c
    @@ -981,7 +981,7 @@ Arguments:
    pPacket Pointer to send packet

    Return Value:
    - NDIS_STATUS_SUCCESS If succes to queue the packet into TxSwQueue.
    + NDIS_STATUS_SUCCESS If success to queue the packet into TxSwQueue.
    NDIS_STATUS_FAILURE If failed to do en-queue.

    Note:
    diff --git a/drivers/staging/rt3090/sta_ioctl.c
    b/drivers/staging/rt3090/sta_ioctl.c
    index b8ab84a..b1c2b5a 100644
    --- a/drivers/staging/rt3090/sta_ioctl.c
    +++ b/drivers/staging/rt3090/sta_ioctl.c
    @@ -5000,7 +5000,7 @@ INT RTMPQueryInformation(
    // add the most up-to-date h/w raw counters into
    software counters
    NICUpdateRawCounters(pAd);

    - // Sanity check for calculation of sucessful count
    + // Sanity check for calculation of successful count
    if
    (pAd->WlanCounters.TransmittedFragmentCount.QuadPart <
    pAd->WlanCounters.RetryCount.QuadPart)

    pAd->WlanCounters.TransmittedFragmentCount.QuadPart =
    pAd->WlanCounters.RetryCount.QuadPart;

    diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
    index f890a16..be19afe 100644
    --- a/drivers/staging/sep/sep_driver.c
    +++ b/drivers/staging/sep/sep_driver.c
    @@ -2447,7 +2447,7 @@ static void sep_configure_dma_burst(struct
    sep_device *sep)
    #endif

    /*
    - Function that is activaed on the succesful probe of the SEP device
    + Function that is activaed on the successful probe of the SEP device
    */
    static int __devinit sep_probe(struct pci_dev *pdev, const struct
    pci_device_id *ent)
    {
    diff --git a/drivers/staging/vt6655/device_main.c
    b/drivers/staging/vt6655/device_main.c
    index 53450b4..0db8d7b 100644
    --- a/drivers/staging/vt6655/device_main.c
    +++ b/drivers/staging/vt6655/device_main.c
    @@ -661,7 +661,7 @@ else
    if(zonetype!=pDevice->abyEEPROM[EEP_OFS_ZONETYPE])
    printk("zonetype in file[%02x] mismatch with in
    EEPROM[%02x]\n",zonetype,pDevice->abyEEPROM[EEP_OFS_ZONETYPE]);
    else
    - printk("Read Zonetype file sucess,use default zonetype
    setting[%02x]\n",zonetype);
    + printk("Read Zonetype file success,use default zonetype
    setting[%02x]\n",zonetype);
    }
    }
    else
    diff --git a/drivers/staging/vt6655/ioctl.c b/drivers/staging/vt6655/ioctl.c
    index fc9cbe0..b15ce8a 100644
    --- a/drivers/staging/vt6655/ioctl.c
    +++ b/drivers/staging/vt6655/ioctl.c
    @@ -692,7 +692,7 @@ if(wpa_Result.authenticated==TRUE) {
    wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
    }
    #endif
    - pDevice->fWPA_Authened = TRUE; //is sucessful peer
    to wpa_Result.authenticated?
    + pDevice->fWPA_Authened = TRUE; //is successful
    peer to wpa_Result.authenticated?
    }

    //printk("get private wpa_supplicant announce WPA SM\n");
    diff --git a/drivers/staging/vt6655/mib.h b/drivers/staging/vt6655/mib.h
    index 69e04f7..2aa2b91 100644
    --- a/drivers/staging/vt6655/mib.h
    +++ b/drivers/staging/vt6655/mib.h
    @@ -325,10 +325,10 @@ typedef struct tagSStatCounter {
    #ifdef Calcu_LinkQual
    //Tx count:
    ULONG TxNoRetryOkCount; //success tx no retry !
    - ULONG TxRetryOkCount; //sucess tx but retry !
    + ULONG TxRetryOkCount; //success tx but retry !
    ULONG TxFailCount; //fail tx ?
    //Rx count:
    - ULONG RxOkCnt; //sucess rx !
    + ULONG RxOkCnt; //success rx !
    ULONG RxFcsErrCnt; //fail rx ?
    //statistic
    ULONG SignalStren;
    diff --git a/drivers/staging/vt6656/baseband.c
    b/drivers/staging/vt6656/baseband.c
    index 820a7b8..49f419e 100644
    --- a/drivers/staging/vt6656/baseband.c
    +++ b/drivers/staging/vt6656/baseband.c
    @@ -1041,7 +1041,7 @@ else {
    if(pDevice->config_file.ZoneType !=pDevice->abyEEPROM[EEP_OFS_ZONETYPE])
    printk("zonetype in file[%02x] mismatch with in
    EEPROM[%02x]\n",pDevice->config_file.ZoneType,pDevice->abyEEPROM[EEP_OFS_ZONETYPE]);
    else
    - printk("Read Zonetype file sucess,use default zonetype
    setting[%02x]\n",pDevice->config_file.ZoneType);
    + printk("Read Zonetype file success,use default zonetype
    setting[%02x]\n",pDevice->config_file.ZoneType);
    }
    }

    diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c
    index d94131f..76dcb5e 100644
    --- a/drivers/staging/vt6656/ioctl.c
    +++ b/drivers/staging/vt6656/ioctl.c
    @@ -679,7 +679,7 @@ if(wpa_Result.authenticated==TRUE) {
    wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
    }
    #endif
    - pDevice->fWPA_Authened = TRUE; //is sucessful peer
    to wpa_Result.authenticated?
    + pDevice->fWPA_Authened = TRUE; //is successful
    peer to wpa_Result.authenticated?
    }

    //printk("get private wpa_supplicant announce WPA SM\n");
    diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
    index aa8d1a2..b7c6a22 100644
    --- a/drivers/staging/vt6656/iwctl.c
    +++ b/drivers/staging/vt6656/iwctl.c
    @@ -1724,7 +1724,7 @@ int iwctl_siwauth(struct net_device *dev,
    case IW_AUTH_WPA_ENABLED:
    //pDevice->bWPADEVUp = !! wrq->value;
    //if(pDevice->bWPADEVUp==TRUE)
    - // printk("iwctl_siwauth:set WPADEV to enable sucessful*******\n");
    + // printk("iwctl_siwauth:set WPADEV to enable successful*******\n");
    //else
    // printk("iwctl_siwauth:set WPADEV to enable fail?????\n");
    break;
    diff --git a/drivers/staging/vt6656/main_usb.c
    b/drivers/staging/vt6656/main_usb.c
    index 7f96bca..fefec79 100644
    --- a/drivers/staging/vt6656/main_usb.c
    +++ b/drivers/staging/vt6656/main_usb.c
    @@ -1546,7 +1546,7 @@ if(result!=0) {
    return buffer;
    }

    -//return --->-1:fail; >=0:sucessful
    +//return --->-1:fail; >=0:successful
    static int Read_config_file(PSDevice pDevice) {
    int result=0;
    UCHAR tmpbuffer[100];
    diff --git a/drivers/staging/vt6656/mib.h b/drivers/staging/vt6656/mib.h
    index b806b4d..ac996d2 100644
    --- a/drivers/staging/vt6656/mib.h
    +++ b/drivers/staging/vt6656/mib.h
    @@ -357,10 +357,10 @@ typedef struct tagSStatCounter {
    #ifdef Calcu_LinkQual
    //Tx count:
    ULONG TxNoRetryOkCount; //success tx no retry !
    - ULONG TxRetryOkCount; //sucess tx but retry !
    + ULONG TxRetryOkCount; //success tx but retry !
    ULONG TxFailCount; //fail tx ?
    //Rx count:
    - ULONG RxOkCnt; //sucess rx !
    + ULONG RxOkCnt; //success rx !
    ULONG RxFcsErrCnt; //fail rx ?
    //statistic
    ULONG SignalStren;
    diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
    index 6912344..f0dfcd0 100644
    --- a/drivers/staging/vt6656/wcmd.c
    +++ b/drivers/staging/vt6656/wcmd.c
    @@ -1332,7 +1332,7 @@ BSSvSecondTxData(
    }

    spin_lock_irq(&pDevice->lock);
    - //is wap_supplicant running sucessful OR only open && sharekey mode!
    + //is wap_supplicant running successful OR only open && sharekey mode!
    #if 1
    if(((pDevice->bLinkPass ==TRUE)&&(pMgmt->eAuthenMode <
    WMAC_AUTH_WPA)) || //open && sharekey linking
    (pDevice->fWPA_Authened == TRUE)) { //wpa linking
    diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
    index da718e8..e80f1af 100644
    --- a/drivers/usb/core/message.c
    +++ b/drivers/usb/core/message.c
    @@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct
    usb_device *udev)
    * routine gets around the normal restrictions by using a work thread to
    * submit the change-config request.
    *
    - * Returns 0 if the request was succesfully queued, error code otherwise.
    + * Returns 0 if the request was successfully queued, error code otherwise.
    * The caller has no way to know whether the queued request will eventually
    * succeed.
    */
    diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
    index 7953948..4e36578 100644
    --- a/drivers/usb/gadget/f_acm.c
    +++ b/drivers/usb/gadget/f_acm.c
    @@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f)
    * @length: size of data
    * Context: irqs blocked, acm->lock held, acm_notify_req non-null
    *
    - * Returns zero on sucess or a negative errno.
    + * Returns zero on success or a negative errno.
    *
    * See section 6.3.5 of the CDC 1.1 specification for information
    * about the only notification we issue: SerialState change.
    diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
    index 1937d8c..adda120 100644
    --- a/drivers/usb/gadget/pxa27x_udc.c
    +++ b/drivers/usb/gadget/pxa27x_udc.c
    @@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
    * pxa_udc_wakeup - Force udc device out of suspend
    * @_gadget: usb gadget
    *
    - * Returns 0 if succesfull, error code otherwise
    + * Returns 0 if successfull, error code otherwise
    */
    static int pxa_udc_wakeup(struct usb_gadget *_gadget)
    {
    diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
    index 62a226b..00a2985 100644
    --- a/drivers/usb/host/fhci-sched.c
    +++ b/drivers/usb/host/fhci-sched.c
    @@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)


    /*
    - * Process normal completions(error or sucess) and clean the schedule.
    + * Process normal completions(error or success) and clean the schedule.
    *
    * This is the main path for handing urbs back to drivers. The only other patth
    * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
    diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
    index 9ec7fd5..9579cf4 100644
    --- a/drivers/usb/wusbcore/crypto.c
    +++ b/drivers/usb/wusbcore/crypto.c
    @@ -111,7 +111,7 @@ struct aes_ccm_b1 {
    *
    * CCM uses Ax blocks to generate a keystream with which the MIC and
    * the message's payload are encoded. A0 always encrypts/decrypts the
    - * MIC. Ax (x>0) are used for the sucesive payload blocks.
    + * MIC. Ax (x>0) are used for the successive payload blocks.
    *
    * The x is the counter, and is increased for each block.
    */
    diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
    index 613a5fc..489b478 100644
    --- a/drivers/usb/wusbcore/wa-xfer.c
    +++ b/drivers/usb/wusbcore/wa-xfer.c
    @@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb)
    /*
    * Callback for the segment request
    *
    - * If succesful transition state (unless already transitioned or
    + * If successful transition state (unless already transitioned or
    * outbound transfer); otherwise, take a note of the error, mark this
    * segment done and try completion.
    *
    @@ -1364,7 +1364,7 @@ segment_aborted:
    /*
    * Callback for the IN data phase
    *
    - * If succesful transition state; otherwise, take a note of the
    + * If successful transition state; otherwise, take a note of the
    * error, mark this segment done and try completion.
    *
    * Note we don't access until we are sure that the transfer hasn't
    diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
    index c7080d4..0bb665a 100644
    --- a/drivers/uwb/i1480/dfu/usb.c
    +++ b/drivers/uwb/i1480/dfu/usb.c
    @@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb)
    * will verify it.
    *
    * Set i1480->evt_result with the result of getting the event or its
    - * size (if succesful).
    + * size (if successful).
    *
    * Delivers the data directly to i1480->evt_buf
    */
    diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c
    index 86a853b..7350ed6 100644
    --- a/drivers/uwb/wlp/txrx.c
    +++ b/drivers/uwb/wlp/txrx.c
    @@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame);
    * and transmission will be done by the calling function.
    * @dst: On return this will contain the device address to which the
    * frame is destined.
    - * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer,
    + * @returns: 0 on success no tx : WLP header successfully applied to
    skb buffer,
    * calling function can proceed with tx
    * 1 on success with tx : WLP will take over transmission of this
    * frame
    diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
    index 3bde56b..5bfb1f2 100644
    --- a/drivers/watchdog/wdrtas.c
    +++ b/drivers/watchdog/wdrtas.c
    @@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = {
    /**
    * wdrtas_get_tokens - reads in RTAS tokens
    *
    - * returns 0 on succes, <0 on failure
    + * returns 0 on success, <0 on failure
    *
    * wdrtas_get_tokens reads in the tokens for the RTAS calls used in
    * this watchdog driver. It tolerates, if "get-sensor-state" and
    @@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void)
    /**
    * wdrtas_register_devs - registers the misc dev handlers
    *
    - * returns 0 on succes, <0 on failure
    + * returns 0 on success, <0 on failure
    *
    * wdrtas_register_devs registers the watchdog and temperature watchdog
    * misc devs
    @@ -630,7 +630,7 @@ static int wdrtas_register_devs(void)
    /**
    * wdrtas_init - init function of the watchdog driver
    *
    - * returns 0 on succes, <0 on failure
    + * returns 0 on success, <0 on failure
    *
    * registers the file handlers and the reboot notifier
    */
    diff --git a/fs/bio.c b/fs/bio.c
    index 402cb84..a82f389 100644
    --- a/fs/bio.c
    +++ b/fs/bio.c
    @@ -272,7 +272,7 @@ EXPORT_SYMBOL(bio_init);
    * for a &struct bio to become free. If a %NULL @bs is passed in, we will
    * fall back to just using @kmalloc to allocate the required memory.
    *
    - * Note that the caller must set ->bi_destructor on succesful return
    + * Note that the caller must set ->bi_destructor on successful return
    * of a bio, to do the appropriate freeing of the bio once the reference
    * count drops to zero.
    **/
    diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
    index 2c726b7..6815d2a 100644
    --- a/fs/btrfs/extent_map.c
    +++ b/fs/btrfs/extent_map.c
    @@ -256,7 +256,7 @@ out:
    * Insert @em into @tree or perform a simple forward/backward merge with
    * existing mappings. The extent_map struct passed in will be inserted
    * into the tree directly, with an additional reference taken, or a
    - * reference dropped if the merge attempt was sucessfull.
    + * reference dropped if the merge attempt was successfull.
    */
    int add_extent_mapping(struct extent_map_tree *tree,
    struct extent_map *em)
    diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
    index 16f682e..b540aa5 100644
    --- a/fs/dlm/plock.c
    +++ b/fs/dlm/plock.c
    @@ -143,7 +143,7 @@ out:
    }
    EXPORT_SYMBOL_GPL(dlm_posix_lock);

    -/* Returns failure iff a succesful lock operation should be canceled */
    +/* Returns failure iff a successful lock operation should be canceled */
    static int dlm_plock_callback(struct plock_op *op)
    {
    struct file *file;
    diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
    index 1a80301..378991c 100644
    --- a/fs/jffs2/readinode.c
    +++ b/fs/jffs2/readinode.c
    @@ -931,7 +931,7 @@ static inline int read_unknown(struct
    jffs2_sb_info *c, struct jffs2_raw_node_re
    * Helper function for jffs2_get_inode_nodes().
    * The function detects whether more data should be read and reads it if yes.
    *
    - * Returns: 0 on succes;
    + * Returns: 0 on success;
    * negative error code on failure.
    */
    static int read_more(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
    diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
    index 663c0e3..5397396 100644
    --- a/fs/ntfs/file.c
    +++ b/fs/ntfs/file.c
    @@ -1281,7 +1281,7 @@ rl_not_mapped_enoent:

    /*
    * Copy as much as we can into the pages and return the number of bytes which
    - * were sucessfully copied. If a fault is encountered then clear the pages
    + * were successfully copied. If a fault is encountered then clear the pages
    * out to (ofs + bytes) and return the number of bytes which were copied.
    */
    static inline size_t ntfs_copy_from_user(struct page **pages,
    diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
    index 89b0298..4dadcdf 100644
    --- a/fs/ntfs/logfile.c
    +++ b/fs/ntfs/logfile.c
    @@ -338,7 +338,7 @@ err_out:
    * copy of the complete multi sector transfer deprotected page. On failure,
    * *@wrp is undefined.
    *
    - * Simillarly, if @lsn is not NULL, on succes *@lsn will be set to the current
    + * Simillarly, if @lsn is not NULL, on success *@lsn will be set to the current
    * logfile lsn according to this restart page. On failure, *@lsn is undefined.
    *
    * The following error codes are defined:
    diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
    index 38a42f5..7c7198a 100644
    --- a/fs/ocfs2/alloc.c
    +++ b/fs/ocfs2/alloc.c
    @@ -2398,7 +2398,7 @@ static int ocfs2_leftmost_rec_contains(struct
    ocfs2_extent_list *el, u32 cpos)
    *
    * The array is assumed to be large enough to hold an entire path (tree depth).
    *
    - * Upon succesful return from this function:
    + * Upon successful return from this function:
    *
    * - The 'right_path' array will contain a path to the leaf block
    * whose range contains e_cpos.
    diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
    index 0d38d67..c5e4a49 100644
    --- a/fs/ocfs2/dlmglue.c
    +++ b/fs/ocfs2/dlmglue.c
    @@ -1855,7 +1855,7 @@ int ocfs2_file_lock(struct file *file, int ex,
    int trylock)
    * outstanding lock request, so a cancel convert is
    * required. We intentionally overwrite 'ret' - if the
    * cancel fails and the lock was granted, it's easier
    - * to just bubble sucess back up to the user.
    + * to just bubble success back up to the user.
    */
    ret = ocfs2_flock_handle_signal(lockres, level);
    } else if (!ret && (level > lockres->l_level)) {
    diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
    index e1c0ec0..0822345 100644
    --- a/fs/omfs/bitmap.c
    +++ b/fs/omfs/bitmap.c
    @@ -85,7 +85,7 @@ out:
    }

    /*
    - * Tries to allocate exactly one block. Returns true if sucessful.
    + * Tries to allocate exactly one block. Returns true if successful.
    */
    int omfs_allocate_block(struct super_block *sb, u64 block)
    {
    diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
    index f94ddf7..868a55e 100644
    --- a/fs/ubifs/recovery.c
    +++ b/fs/ubifs/recovery.c
    @@ -23,7 +23,7 @@
    /*
    * This file implements functions needed to recover from unclean un-mounts.
    * When UBIFS is mounted, it checks a flag on the master node to determine if
    - * an un-mount was completed sucessfully. If not, the process of mounting
    + * an un-mount was completed successfully. If not, the process of mounting
    * incorparates additional checking and fixing of on-flash data structures.
    * UBIFS always cleans away all remnants of an unclean un-mount, so that
    * errors do not accumulate. However UBIFS defers recovery if it is mounted
    diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
    index 6c0d7cf..4434453 100644
    --- a/include/linux/pktcdvd.h
    +++ b/include/linux/pktcdvd.h
    @@ -30,7 +30,7 @@

    /*
    * use drive write caching -- we need deferred error handling to be
    - * able to sucessfully recover with this option (drive will return good
    + * able to successfully recover with this option (drive will return good
    * status as soon as the cdb is validated).
    */
    #if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
    diff --git a/include/net/tcp.h b/include/net/tcp.h
    index 03a49c7..1827e7f 100644
    --- a/include/net/tcp.h
    +++ b/include/net/tcp.h
    @@ -1260,7 +1260,7 @@ static inline struct sk_buff
    *tcp_write_queue_prev(struct sock *sk, struct sk_bu
    skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)

    /* This function calculates a "timeout" which is equivalent to the timeout of a
    - * TCP connection after "boundary" unsucessful, exponentially backed-off
    + * TCP connection after "boundary" unsuccessful, exponentially backed-off
    * retransmissions with an initial RTO of TCP_RTO_MIN.
    */
    static inline bool retransmits_timed_out(const struct sock *sk,
    diff --git a/kernel/perf_event.c b/kernel/perf_event.c
    index a69d4ed..b1d0e10 100644
    --- a/kernel/perf_event.c
    +++ b/kernel/perf_event.c
    @@ -420,7 +420,7 @@ static void perf_event_remove_from_context(struct
    perf_event *event)
    if (!task) {
    /*
    * Per cpu events are removed via an smp call and
    - * the removal is always sucessful.
    + * the removal is always successful.
    */
    smp_call_function_single(event->cpu,
    __perf_event_remove_from_context,
    @@ -828,7 +828,7 @@ perf_install_in_context(struct perf_event_context *ctx,
    if (!task) {
    /*
    * Per cpu events are installed via an smp call and
    - * the install is always sucessful.
    + * the install is always successful.
    */
    smp_call_function_single(cpu, __perf_install_in_context,
    event, 1);
    diff --git a/mm/filemap.c b/mm/filemap.c
    index ef169f3..c3d3506 100644
    --- a/mm/filemap.c
    +++ b/mm/filemap.c
    @@ -1844,7 +1844,7 @@ static size_t __iovec_copy_from_user_inatomic(char *vaddr,

    /*
    * Copy as much as we can into the page and return the number of bytes which
    - * were sucessfully copied. If a fault is encountered then return
    the number of
    + * were successfully copied. If a fault is encountered then return
    the number of
    * bytes which were copied.
    */
    size_t iov_iter_copy_from_user_atomic(struct page *page,
    diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
    index 751c4d0..719ddbc 100644
    --- a/net/mac80211/mesh_pathtbl.c
    +++ b/net/mac80211/mesh_pathtbl.c
    @@ -244,7 +244,7 @@ struct mesh_path *mesh_path_lookup_by_idx(int idx,
    struct ieee80211_sub_if_data
    * @addr: destination address of the path (ETH_ALEN length)
    * @sdata: local subif
    *
    - * Returns: 0 on sucess
    + * Returns: 0 on success
    *
    * State: the initial state of the new path is set to 0
    */
    @@ -530,7 +530,7 @@ static void mesh_path_node_reclaim(struct rcu_head *rp)
    * @addr: dst address (ETH_ALEN length)
    * @sdata: local subif
    *
    - * Returns: 0 if succesful
    + * Returns: 0 if successful
    */
    int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata)
    {
    diff --git a/net/netlabel/netlabel_domainhash.c
    b/net/netlabel/netlabel_domainhash.c
    index 7a10bbe..c5d9f97 100644
    --- a/net/netlabel/netlabel_domainhash.c
    +++ b/net/netlabel/netlabel_domainhash.c
    @@ -682,7 +682,7 @@ struct netlbl_domaddr6_map
    *netlbl_domhsh_getentry_af6(const char *domain,
    * buckets and @skip_chain entries. For each entry in the table call
    * @callback, if @callback returns a negative value stop 'walking' through the
    * table and return. Updates the values in @skip_bkt and @skip_chain on
    - * return. Returns zero on succcess, negative values on failure.
    + * return. Returns zero on success, negative values on failure.
    *
    */
    int netlbl_domhsh_walk(u32 *skip_bkt,
    diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
    index 8674d49..29d8501 100644
    --- a/net/sctp/sm_sideeffect.c
    +++ b/net/sctp/sm_sideeffect.c
    @@ -719,7 +719,7 @@ static void sctp_cmd_new_state(sctp_cmd_seq_t *cmds,

    if (sctp_style(sk, TCP)) {
    /* Change the sk->sk_state of a TCP-style socket that has
    - * sucessfully completed a connect() call.
    + * successfully completed a connect() call.
    */
    if (sctp_state(asoc, ESTABLISHED) && sctp_sstate(sk, CLOSED))
    sk->sk_state = SCTP_SS_ESTABLISHED;
    diff --git a/net/wimax/op-reset.c b/net/wimax/op-reset.c
    index ca26917..35f3700 100644
    --- a/net/wimax/op-reset.c
    +++ b/net/wimax/op-reset.c
    @@ -62,7 +62,7 @@
    * Called when wanting to reset the device for any reason. Device is
    * taken back to power on status.
    *
    - * This call blocks; on succesful return, the device has completed the
    + * This call blocks; on successful return, the device has completed the
    * reset process and is ready to operate.
    */
    int wimax_reset(struct wimax_dev *wimax_dev)
    diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
    index e688237..2534400 100644
    --- a/security/selinux/netlabel.c
    +++ b/security/selinux/netlabel.c
    @@ -204,7 +204,7 @@ int selinux_netlbl_skbuff_getsid(struct sk_buff *skb,
    *
    * Description
    * Call the NetLabel mechanism to set the label of a packet using @sid.
    - * Returns zero on auccess, negative values on failure.
    + * Returns zero on success, negative values on failure.
    *
    */
    int selinux_netlbl_skbuff_setsid(struct sk_buff *skb,
    diff --git a/sound/sound_core.c b/sound/sound_core.c
    index 49c9981..dbca7c9 100644
    --- a/sound/sound_core.c
    +++ b/sound/sound_core.c
    @@ -353,7 +353,7 @@ static struct sound_unit *chains[SOUND_STEP];
    * @dev: device pointer
    *
    * Allocate a special sound device by minor number from the sound
    - * subsystem. The allocated number is returned on succes. On failure
    + * subsystem. The allocated number is returned on success. On failure
    * a negative error code is returned.
    */

    --
    1.6.5.2.101.gcd0f8
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2009-10-31 10:43    [W:0.150 / U:33.860 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site