lkml.org 
[lkml]   [2009]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] rt2x00: Implement support for rt2800pci
From
On Sat, Oct 17, 2009 at 22:18, Bartlomiej Zolnierkiewicz
<bzolnier@gmail.com> wrote:
> On Saturday 17 October 2009 16:54:03 Bartlomiej Zolnierkiewicz wrote:
>>
>> [ I somehow missed this one by not being on cc: ]
>>
>> On Thursday 15 October 2009 22:04:14 Ivo van Doorn wrote:
>> > Add support for the rt2860/rt3090 chipsets from Ralink.
>> >
>> > Includes various patches from a lot of people who helped
>> > getting this driver into the current shape.
>> >
>> > Signed-off-by: Alban Browaeys <prahal@yahoo.com>
>> > Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr>
>> > Signed-off-by: Felix Fietkau <nbd@openwrt.org>
>> > Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
>> > Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
>> > Signed-off-by: Mark Asselstine <asselsm@gmail.com>
>> > Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
>> > Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
>> > ---
>> > http://kernel.org/pub/linux/kernel/people/ivd/patches/0003-rt2x00-Implement-support-for-rt2800pci.patch
>>
>> First let me say that I'm very happy to see this patch finally being
>> submitted and I appreciate the effort..
>>
>> (I'll give it a spin on Eee 901 w/ 2.6.32-rc5 sometime later..)
>
> Unfortunately still no luck with it, works just like it worked when I first
> tried it half a year ago (loads OK but "iwlist wlan0 scan" doesn't bring any
> results)..
>
> Could somebody with the genuine RT2860 revision of the chip try the driver
> and confirm that it works w/ 2.6.32-rc5 so I will know whether I should be
> looking for some generic problem or RT2880 revision specific one?

With my RaLink RT2760 Wireless 802.11n 1T/2R Cardbus [1814:0701], it
fails right after loading the firmware to the card.
(this is an internal PCI card, not cardbus)

Oct 16 23:08:15 lc kernel: phy0 -> rt2x00_set_chip: Info - Chipset
detected - rt: 0701, rf: 0003, rev: 28600102.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00lib_request_firmware: Info -
Loading firmware file 'rt2860.bin'.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00lib_request_firmware: Info -
Firmware detected - version: 0.11.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00pci_regbusy_read: Error -
Indirect register access failed: offset=0x00007010, value=0xffffffff
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00pci_regbusy_read: Error -
Indirect register access failed: offset=0x00007010, value=0xffffffff
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00pci_regbusy_read: Error -
Indirect register access failed: offset=0x00007010, value=0xffffffff
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00mac_conf_tx: Info -
Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00mac_conf_tx: Info -
Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00mac_conf_tx: Info -
Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
Oct 16 23:08:23 lc kernel: phy0 -> rt2x00mac_conf_tx: Info -
Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.

We get those "regbusy errors" and then, the MCU no longer accepts any command.

Oddly though, it can scan and detect the surrounding AP's.


Luis Correia,
rt2x0 project admin


\
 
 \ /
  Last update: 2009-10-18 11:43    [W:0.070 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site