lkml.org 
[lkml]   [2009]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] leds-alix2: add support for button connected to J15
Hi Daniel,

On Fri, Oct 16, 2009 at 03:03:15PM +0200, Daniel Mack wrote:
>
> +#ifdef CONFIG_LEDS_ALIX2_BUTTON
> +static void alix_button_poll(struct input_polled_dev *ipdev)
> +{
> + unsigned int val = !(inl(gpio_base + 0x30) & (1 << 1));
> +
> + if (val == alix_button_last)
> + return;

You can probably let input core filter out duplicate events...
> +
> + input_report_key(ipdev->input, BTN_MISC, val);

BTN_MISC is expected to be used by joysticks or poniting devices, I'd
recomment KEY_PROG1 for a key.

> + input_sync(ipdev->input);
> + alix_button_last = val;
> +}
> +#endif
> +
> static int __init alix_led_probe(struct platform_device *pdev)
> {
> int i;
> @@ -89,6 +110,35 @@ static int __init alix_led_probe(struct platform_device *pdev)
> if (ret < 0)
> goto fail;
> }
> +
> +#ifdef CONFIG_LEDS_ALIX2_BUTTON
> + /* enable button input */
> + outl(1 << 1, gpio_base + 0x20);
> +
> + /* enable pullup on input pin */
> + outl(1 << 1, gpio_base + 0x18);
> +
> + alix_button_last = 0;
> + ipdev = input_allocate_polled_device();
> + if (!ipdev)
> + goto fail;
> +
> + ipdev->poll = alix_button_poll;
> + ipdev->poll_interval = POLL_INTERVAL_DEFAULT;
> + ipdev->input->name = "ALIX2 button";
> + ipdev->input->phys = "alix2/input0";
> + ipdev->input->id.bustype = BUS_HOST;
> +
> + set_bit(EV_KEY, ipdev->input->evbit);
> + ipdev->input->keybit[BIT_WORD(BTN_MISC)] = BIT_MASK(BTN_MISC);
> +
> + ret = input_register_polled_device(ipdev);
> + if (ret) {
> + input_free_polled_device(ipdev);
> + goto fail;
> + }
> +#endif

Fells like you want to make it a function (and a stub if not
configured)...

--
Dmitry


\
 
 \ /
  Last update: 2009-10-18 09:31    [W:0.201 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site