lkml.org 
[lkml]   [2009]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ATA related kernel warning after resume with 2.6.32-rc4
On 10/14/2009 02:55 AM, Tino Keitel wrote:
> Hi,
>
> I get this warning after resume from suspend to RAM:
>
> ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
> ata1.00: configured for UDMA/33
> firewire_core: rediscovered device fw0
> sd 2:0:1:0: [sda] Starting disk
> firewire_core: phy config: card 0, new root=ffc1, gap_count=5
> ------------[ cut here ]------------
> WARNING: at drivers/ata/libata-core.c:5039
> ata_qc_complete+0x1ec/0x260()
> Hardware name: Macmini2,1
> Modules linked in: ipv6 fbcon font bitblit softcursor i915
> drm_kms_helper drm fb i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect
> loop btusb bluetooth firewire_sbp2 snd_hda_codec_idt dvb_usb dvb_core
> video backlight output snd_hda_intel firewire_ohci usblp firewire_core
> sky2 snd_hda_codec evdev crc_itu_t snd_pcm snd_timer snd_page_alloc
> [last unloaded: dvb_usb_vp7045]
> Pid: 254, comm: ata/0 Not tainted 2.6.32-rc4-00001-gd93a8f8 #24
> Call Trace:
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff8103ceb4>] ? warn_slowpath_common+0x74/0xd0
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff81318100>] ? ata_do_link_abort+0xa0/0xe0
> [<ffffffff8131b01f>] ? ata_hsm_qc_complete+0x15f/0x170
> [<ffffffff8131b1ca>] ? ata_sff_hsm_move+0x19a/0x700
> [<ffffffff8131bacf>] ? ata_pio_task+0x2f/0x110
> [<ffffffff8131baa0>] ? ata_pio_task+0x0/0x110
> [<ffffffff8104eb8b>] ? worker_thread+0x12b/0x1f0
> [<ffffffff81052ee0>] ? autoremove_wake_function+0x0/0x30
> [<ffffffff8104ea60>] ? worker_thread+0x0/0x1f0
> [<ffffffff81052b56>] ? kthread+0x96/0xa0
> [<ffffffff8100cc1a>] ? child_rip+0xa/0x20
> [<ffffffff81052ac0>] ? kthread+0x0/0xa0
> [<ffffffff8100cc10>] ? child_rip+0x0/0x20
> ---[ end trace 158461bf60ae353f ]---
> ata3.01: NODEV after polling detection
> ata3.01: revalidation failed (errno=-2)

Can you email your full dmesg and lspci?

Also, note that linux-ide was added to CC.

Jeff






\
 
 \ /
  Last update: 2009-10-14 09:37    [W:0.039 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site