lkml.org 
[lkml]   [2009]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] cciss: Add cciss_allow_hpsa module parameter.
Date
Add cciss_allow_hpsa module parameter.  This parameter causes
the cciss driver to ignore any Smart Array devices known to be
supported by the hpsa driver.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/block/cciss.c | 74 +++++++++++++++++++++++--------------------------
1 files changed, 34 insertions(+), 40 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 52f53c1..6399e50 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -68,6 +68,12 @@ MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");

+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+ "Prevent cciss driver from accessing hardware known to be "
+ " supported by the hpsa driver");
+
#include "cciss_cmd.h"
#include "cciss.h"
#include <linux/cciss_ioctl.h>
@@ -101,8 +107,6 @@ static const struct pci_device_id cciss_pci_device_id[] = {
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};

@@ -123,8 +127,6 @@ static struct board_type products[] = {
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
@@ -132,6 +134,10 @@ static struct board_type products[] = {
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
{0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x323D103C, "Smart Array P700m", &SA5_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
@@ -140,7 +146,6 @@ static struct board_type products[] = {
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};

/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3754,7 +3759,27 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
__u64 cfg_offset;
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
- int i, err;
+ int i, prod_index, err;
+
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id);
+
+ for (i = 0; i < ARRAY_SIZE(products); i++) {
+ /* Stand aside for hpsa driver on request */
+ if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+ return -ENODEV;
+ if (board_id == products[i].board_id)
+ break;
+ }
+ prod_index = i;
+ if (prod_index == ARRAY_SIZE(products)) {
+ dev_warn(&pdev->dev,
+ "unrecognized board ID: 0x%08lx, ignoring.\n",
+ (unsigned long) board_id);
+ return -ENODEV;
+ }

/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
@@ -3778,11 +3803,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
return err;
}

- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
-
#ifdef CCISS_DEBUG
printk("command = %x\n", command);
printk("irq = %x\n", pdev->irq);
@@ -3868,14 +3888,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
* leave a little room for ioctl calls.
*/
c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- for (i = 0; i < ARRAY_SIZE(products); i++) {
- if (board_id == products[i].board_id) {
- c->product_name = products[i].product_name;
- c->access = *(products[i].access);
- c->nr_cmds = c->max_commands - 4;
- break;
- }
- }
+ c->product_name = products[prod_index].product_name;
+ c->access = *(products[prod_index].access);
+ c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
@@ -3884,27 +3899,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
err = -ENODEV;
goto err_out_free_res;
}
- /* We didn't find the controller in our list. We know the
- * signature is valid. If it's an HP device let's try to
- * bind to the device and fire it up. Otherwise we bail.
- */
- if (i == ARRAY_SIZE(products)) {
- if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
- c->product_name = products[i-1].product_name;
- c->access = *(products[i-1].access);
- c->nr_cmds = c->max_commands - 4;
- printk(KERN_WARNING "cciss: This is an unknown "
- "Smart Array controller.\n"
- "cciss: Please update to the latest driver "
- "available from www.hp.com.\n");
- } else {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n"
- , (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
- }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */


\
 
 \ /
  Last update: 2009-10-12 18:05    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site