Messages in this thread |  | | | Subject | Re: [RFC] Regulator: Possibility of passing notifications of non alarm events. | | From | Liam Girdwood <> | | Date | Sun, 04 Jan 2009 10:31:18 +0000 | |
On Sat, 2009-01-03 at 21:11 +0000, Jonathan Cameron wrote:
> Dear All,> I am in the process of writing an hwmon driver for the Sensiron SHT15 humidity
> sensor.> > In common (I assume) with lots of other devices, the formula for converting
> the outputs of this chip to real units involves the supply voltage.
> Unfortunately the chip doesn't itself have any means of measuring this.
> Obviously this can be supplied via a board config if it is constant.
> > As I have it connected to a DA9030 pmic I can register it as a consumer
> and hence query what the pmic thinks it is supplying.
> > Unfortunately this regulator is shared with a number of other chips and so
> there is no guarantee that this voltage won't be changed (within the bounds
> supported by the SHT15). I'd like to avoid querying the regulator voltage
> every time I do a conversion.> > As the regulator framework already allows you to register to receive events
> such as under voltage detections, it seems to me that it would also make sense
> to allow registrations of handlers for events that occur during normal
> operation such as voltage changes.> > What do people think to adding this functionality?
Sounds fine. I assume you have a patch in development ;)
Thanks
Liam
|  |