lkml.org 
[lkml]   [2009]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectproblem with linux-2.6.28
    Hello, i have not written concerning a kernel bug as of yet, so there is 
    always a first time. my kernel version is: sh scripts/ver_linux:

    ######################################################################################################################


    Linux davesbox 2.6.28-beta #1 PREEMPT Sun Jan 4 15:57:02 MST 2009 i686
    Intel(R) Pentium(R) 4 CPU 3.20GHz GenuineIntel GNU/Linux

    Gnu C 4.2.4
    Gnu make 3.81
    binutils 2.18.50.0.9.20080822
    util-linux 2.14.1
    mount support
    module-init-tools 3.5
    e2fsprogs 1.41.3
    jfsutils 1.1.12
    reiserfsprogs 3.6.20
    xfsprogs 2.10.1
    pcmciautils 015
    quota-tools 3.13.
    PPP 2.4.4
    Linux C Library 2.7
    Dynamic linker (ldd) 2.7
    Linux C++ Library 6.0.9
    Procps 3.2.7
    Net-tools 1.60
    Kbd 1.12
    oprofile 0.9.2
    Sh-utils 6.12
    wireless-tools 29
    Modules Loaded ipv6 nvidia snd_seq_dummy snd_seq_oss
    snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss cifs ntfs
    ide_cd_mod agpgart ppdev lp parport_pc parport hid_dell hid_pl
    hid_cypress hid_zpff hid_gyration hid_bright hid_sony hid_samsung
    hid_microsoft hid_tmff hid_monterey hid_ezkey hid_apple hid_a4tech
    hid_logitech tuner_simple tuner_types hid_cherry hid_sunplus
    hid_petalynx hid_belkin hid_chicony wm8775 usbhid hid cx25840 tuner ivtv
    compat_ioctl32 i2c_algo_bit cx2341x snd_ca0106 v4l2_common videodev
    snd_rawmidi snd_seq_device snd_ac97_codec v4l1_compat thermal tveeprom
    processor snd_pcm uhci_hcd snd_timer thermal_sys i2c_i801 ehci_hcd sky2
    i2c_core psmouse snd soundcore serio_raw ac97_bus snd_page_alloc hwmon
    button evdev


    ###################################################################################################################

    my dmesg output is as follows:

    ####################################################################################################################

    zone: 3951 pages, LIFO batch:0
    Normal zone: 1748 pages used for memmap
    Normal zone: 221994 pages, LIFO batch:31
    HighMem zone: 4620 pages used for memmap
    HighMem zone: 586662 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    WARNING: NR_CPUS limit of 1 reached. Processor ignored.
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000)
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 812607
    Kernel command line: BOOT_IMAGE=Linux-2.6.28 ro root=803
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 3235.931 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3243604k/3276480k available (3222k kernel code, 31608k reserved,
    1142k data, 312k init, 23
    65128k highmem)
    virtual kernel memory layout:
    fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
    pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
    vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
    .init : 0xc0546000 - 0xc0594000 ( 312 kB)
    .data : 0xc0425bb8 - 0xc054355c (1142 kB)
    .text : 0xc0100000 - 0xc0425bb8 (3222 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer
    frequency.. 6471.86 BogoMIPS (lpj=3
    235931)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    using mwait in idle threads.
    CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
    Checking 'hlt' instruction... OK.
    Freeing SMP alternatives: 0k freed
    ACPI: Core revision 20080926
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    net_namespace: 700 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0xa000-0xa01f]
    pci 0000:00:1d.1: reg 20 io port: [0xa080-0xa09f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xc9dff800-0xc9dffbff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
    pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07]
    pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883]
    pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807]
    pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483]
    pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xc9dffc00-0xc9dfffff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
    pci 0000:04:00.0: reg 10 32bit mmio: [0xcb000000-0xcbffffff]
    pci 0000:04:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:04:00.0: reg 1c 64bit mmio: [0xca000000-0xcaffffff]
    pci 0000:04:00.0: reg 24 io port: [0xec00-0xec7f]
    pci 0000:04:00.0: reg 30 32bit mmio: [0xc9fe0000-0xc9ffffff]
    pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xc9f00000-0xcbffffff]
    pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
    pci 0000:02:00.0: reg 10 64bit mmio: [0xc9efc000-0xc9efffff]
    pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
    pci 0000:02:00.0: reg 30 32bit mmio: [0xc9ec0000-0xc9edffff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xc9e00000-0xc9efffff]
    pci 0000:01:09.0: reg 10 io port: [0xbc00-0xbc1f]
    pci 0000:01:09.0: supports D1 D2
    pci 0000:01:0a.0: reg 10 32bit mmio: [0xcc000000-0xcfffffff]
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
    pci 0000:00:1e.0: bridge 64bit mmio pref: [0xcc000000-0xcfffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 6F,
    should be 67 [20080926]
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    hpet clockevent registered
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
    system 00:07: ioport range 0x290-0x297 has been reserved
    system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    system 00:08: ioport range 0x800-0x87f has been reserved
    system 00:08: ioport range 0x400-0x41f has been reserved
    system 00:08: ioport range 0x480-0x4bf has been reserved
    system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
    system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
    system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
    system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0d: iomem range 0x0-0x9ffff could not be reserved
    system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:01.0: IO window: 0xe000-0xefff
    pci 0000:00:01.0: MEM window: 0xc9f00000-0xcbffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:1c.0: IO window: 0xd000-0xdfff
    pci 0000:00:1c.0: MEM window: disabled
    pci 0000:00:1c.0: PREFETCH window: disabled
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.1: IO window: 0xc000-0xcfff
    pci 0000:00:1c.1: MEM window: 0xc9e00000-0xc9efffff
    pci 0000:00:1c.1: PREFETCH window: disabled
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:1e.0: IO window: 0xb000-0xbfff
    pci 0000:00:1e.0: MEM window: disabled
    pci 0000:00:1e.0: PREFETCH window: 0x000000cc000000-0x000000cfffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    bus: 00 index 0 io port: [0x00-0xffff]
    bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
    bus: 04 index 0 io port: [0xe000-0xefff]
    bus: 04 index 1 mmio: [0xc9f00000-0xcbffffff]
    bus: 04 index 2 mmio: [0xd0000000-0xdfffffff]
    bus: 04 index 3 mmio: [0x0-0x0]
    bus: 03 index 0 io port: [0xd000-0xdfff]
    bus: 03 index 1 mmio: [0x0-0x0]
    bus: 03 index 2 mmio: [0x0-0x0]
    bus: 03 index 3 mmio: [0x0-0x0]
    bus: 02 index 0 io port: [0xc000-0xcfff]
    bus: 02 index 1 mmio: [0xc9e00000-0xc9efffff]
    bus: 02 index 2 mmio: [0x0-0x0]
    bus: 02 index 3 mmio: [0x0-0x0]
    bus: 01 index 0 io port: [0xb000-0xbfff]
    bus: 01 index 1 mmio: [0x0-0x0]
    bus: 01 index 2 mmio: [0xcc000000-0xcfffffff]
    bus: 01 index 3 io port: [0x00-0xffff]
    bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    alg: cipher: Test 1 failed on encryption for aes-asm
    00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SGI XFS with ACLs, security attributes, large block numbers, no debug
    enabled
    SGI XFS Quota Management subsystem
    msgmni has been set to 1717
    alg: No test for cipher_null (cipher_null-generic)
    alg: No test for digest_null (digest_null-generic)
    alg: No test for compress_null (compress_null-generic)
    alg: No test for fcrypt (fcrypt-generic)
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:04:00.0: Boot video device
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:01.0: found MSI capability
    pci_express 0000:00:01.0:pcie00: allocate port service
    pci_express 0000:00:01.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: found MSI capability
    pci_express 0000:00:1c.0:pcie00: allocate port service
    pci_express 0000:00:1c.0:pcie02: allocate port service
    pci_express 0000:00:1c.0:pcie03: allocate port service
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: found MSI capability
    pci_express 0000:00:1c.1:pcie00: allocate port service
    pci_express 0000:00:1c.1:pcie02: allocate port service
    pci_express 0000:00:1c.1:pcie03: allocate port service
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    brd: module loaded
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    Uniform Multi-Platform E-IDE driver
    piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
    PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7
    ide1: BM-DMA at 0xffa8-0xffaf
    Probing IDE interface ide0...
    Switched to high resolution mode on CPU 0
    hda: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
    hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
    hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hda: MWDMA2 mode selected
    hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
    hdb: UDMA/33 mode selected
    Probing IDE interface ide1...
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    ide-gd driver 1.18
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE
    mode
    ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
    irq 19
    ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
    irq 19
    ata3: SATA max UDMA/133 abar m1024@0xc9dffc00 port 0xc9dffe00 irq 19
    ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
    irq 19
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: SAMSUNG SP1614C, SW100-30, max UDMA7
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/133
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATA-6: ST3120026AS, 3.18, max UDMA/133
    ata2.00: 234441648 sectors, multi 16: LBA48
    ata2.00: configured for UDMA/133
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
    ata4.00: 488397168 sectors, multi 16: LBA48
    ata4.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614C SW10 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    scsi 1:0:0:0: Direct-Access ATA ST3120026AS 3.18 PQ: 0 ANSI: 5
    sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sdb: sdb1
    sd 1:0:0:0: [sdb] Attached SCSI disk
    scsi 3:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
    sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
    sd 3:0:0:0: [sdc] Write Protect is off
    sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
    sd 3:0:0:0: [sdc] Write Protect is off
    sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sdc: sdc1 sdc2 sdc3
    sd 3:0:0:0: [sdc] Attached SCSI disk
    PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    PNP: PS/2 controller doesn't have KBD irq; using default 1
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
    dm-devel@redhat.com
    EDAC MC: Ver: 2.1.0 Jan 4 2009
    TCP cubic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    Using IPI Shortcut mode
    ReiserFS: sda3: found reiserfs format "3.6" with standard journal
    ReiserFS: sda3: using ordered data mode
    ReiserFS: sda3: journal params: device sda3, size 8192, journal first
    block 18, max trans len 1024
    , max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda3: checking transaction log (sda3)
    ReiserFS: sda3: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Freeing unused kernel memory: 312k freed
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as
    /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button (CM) [PWRB]
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    sky2 driver version 1.22
    sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    sky2 0000:02:00.0: setting latency timer to 64
    sky2 0000:02:00.0: Yukon-2 EC chip revision 1
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc9dff800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.28-beta ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    intel_rng: FWH not detected
    sky2 0000:02:00.0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
    Part Number: Yukon 88E8052
    Engineering Level: Rev. 1.5
    Manufacturer: Marvell
    sky2 eth0: addr 00:11:2f:3f:2d:44
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region
    SMRG [0x400-0x40f]
    ACPI: Device needs an ACPI driver
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: UHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.28-beta uhci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: UHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.28-beta uhci_hcd
    usb usb3: SerialNumber: 0000:00:1d.1
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU1] (supports 8 throttling states)
    Linux video capture interface: v2.00
    CA0106 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
    input: ImPS/2 Generic Wheel Mouse as
    /devices/platform/i8042/serio1/input/input3
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    ivtv: Start initialization, version 1.4.0
    ivtv0: Initializing card #0
    ivtv0: Autodetected Hauppauge card (cx23416 based)
    ivtv 0000:01:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
    tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9623216
    tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
    tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
    tveeprom 1-0050: audio processor is CX25843 (idx 37)
    tveeprom 1-0050: decoder processor is CX25843 (idx 30)
    tveeprom 1-0050: has no radio
    ivtv0: Autodetected Hauppauge WinTV PVR-150
    usb 2-2: configuration #1 chosen from 1 choice
    usb 2-2: New USB device found, idVendor=06a3, idProduct=8021
    usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 2-2: Product: Saitek Eclipse II Keyboard
    usb 2-2: Manufacturer: Chicony
    usb 3-1: new full speed USB device using uhci_hcd and address 2
    usbcore: registered new interface driver hiddev
    cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
    tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
    wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
    tuner-simple 1-0061: creating new instance
    tuner-simple 1-0061: type set to 50 (TCL 2002N)
    ivtv0: Registered device video0 for encoder MPG (4096 kB)
    ivtv0: Registered device video32 for encoder YUV (2048 kB)
    ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
    ivtv0: Registered device video24 for encoder PCM (320 kB)
    ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
    ivtv: End initialization
    input: Chicony Saitek Eclipse II Keyboard as
    /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/inp
    ut/input4
    generic-usb 0003:06A3:8021.0001: input,hidraw0: USB HID v1.11 Keyboard
    [Chicony Saitek Eclipse II
    Keyboard] on usb-0000:00:1d.0-2/input0
    usb 3-1: configuration #1 chosen from 1 choice
    usb 3-1: New USB device found, idVendor=0609, idProduct=031d
    usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    usb 3-1: Product: eHome Infrared Transceiver
    usb 3-1: Manufacturer: SMK
    usb 3-1: SerialNumber: SM006MCV
    input: Chicony Saitek Eclipse II Keyboard as
    /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/inp
    ut/input5
    generic-usb 0003:06A3:8021.0002: input,hiddev96,hidraw1: USB HID v1.11
    Device [Chicony Saitek Ecli
    pse II Keyboard] on usb-0000:00:1d.0-2/input1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k
    lp: driver loaded but no devices found
    Linux agpgart interface v0.103
    ppdev: user-space parallel port driver
    ide-cd driver 5.00
    ide-cd: hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.20
    ide-cd: hdb: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
    NTFS driver 2.1.29 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS-fs warning (device sdb1): load_system_files(): Unsupported volume
    flags 0x4000 encountered.
    NTFS-fs error (device sdb1): load_system_files(): Volume has unsupported
    flags set. Mounting read
    -only. Run chkdsk and mount in Windows.
    sky2 eth0: enabling interface
    sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
    ivtv 0000:01:0a.0: firmware: requesting v4l-cx2341x-enc.fw
    ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
    ivtv0: Encoder revision: 0x02060039
    cx25840 1-0044: firmware: requesting v4l-cx25840.fw
    cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
    nvidia: module license 'NVIDIA' taints kernel.
    nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidia 0000:04:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 180.18 Thu Dec 18 14:29:33
    PST 2008
    nvidia 0000:04:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 180.18 Thu Dec 18 14:29:33
    PST 2008
    nvidia 0000:04:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 180.18 Thu Dec 18 14:29:33
    PST 2008
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    ------------[ cut here ]------------
    WARNING: at arch/x86/kernel/pci-nommu.c:62 nommu_map_sg+0x26/0xb0()
    Modules linked in: ipv6 nvidia(P) snd_seq_dummy snd_seq_oss
    snd_seq_midi_event snd_seq snd_pcm_oss
    snd_mixer_oss cifs ntfs ide_cd_mod agpgart ppdev lp parport_pc parport
    hid_dell hid_pl hid_cypres
    s hid_zpff hid_gyration hid_bright hid_sony hid_samsung hid_microsoft
    hid_tmff hid_monterey hid_ez
    key hid_apple hid_a4tech hid_logitech tuner_simple tuner_types
    hid_cherry hid_sunplus hid_petalynx
    hid_belkin hid_chicony wm8775 usbhid hid cx25840 tuner ivtv
    compat_ioctl32 i2c_algo_bit cx2341x s
    nd_ca0106 v4l2_common videodev snd_rawmidi snd_seq_device snd_ac97_codec
    v4l1_compat thermal tveep
    rom processor snd_pcm uhci_hcd snd_timer thermal_sys i2c_i801 ehci_hcd
    sky2 i2c_core psmouse snd s
    oundcore sg serio_raw ac97_bus snd_page_alloc hwmon button evdev [last
    unloaded: nvidia]
    Pid: 0, comm: swapper Tainted: P 2.6.28-beta #1
    Call Trace:
    [<c012249f>] warn_on_slowpath+0x5f/0x90
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c013ce56>] clocksource_get_next+0x56/0x60
    [<c013b530>] update_wall_time+0x2b0/0x810
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0138fe4>] hrtimer_forward+0x164/0x1b0
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0111050>] lapic_next_event+0x10/0x20
    [<c013e382>] clockevents_program_event+0xa2/0x140
    [<c013f562>] tick_dev_program_event+0x32/0xa0
    [<c013f800>] tick_sched_timer+0x0/0x1c0
    [<c0108626>] nommu_map_sg+0x26/0xb0
    [<c032d3da>] ide_build_sglist+0x4a/0x60
    [<c032d5b2>] ide_build_dmatable+0x32/0x1b0
    [<c032d87b>] ide_dma_setup+0x3b/0xf0
    [<f8ee9000>] ide_cd_do_request+0x410/0x8c0 [ide_cd_mod]
    [<c011cb87>] activate_task+0x17/0x20
    [<c011eb95>] try_to_wake_up+0x125/0x130
    [<f8ee9b60>] cdrom_do_newpc_cont+0x0/0x20 [ide_cd_mod]
    [<c0325a97>] __ide_wait_stat+0x47/0xd0
    [<c03265ff>] ide_wait_stat+0x5f/0x90
    [<c03244f0>] ide_do_request+0x3f0/0x930
    [<c03240a5>] ide_end_request+0x85/0x90
    [<f8eead04>] cdrom_newpc_intr+0x84/0x730 [ide_cd_mod]
    [<fa5c9998>] rm_isr_bh+0x77/0xa2 [nvidia]
    [<c03253a2>] ide_intr+0x252/0x270
    [<f8eeac80>] cdrom_newpc_intr+0x0/0x730 [ide_cd_mod]
    [<c014c375>] handle_IRQ_event+0x25/0x50
    [<c014e0b3>] handle_edge_irq+0xb3/0x140
    [<c0105606>] do_IRQ+0x66/0x80
    [<c0127125>] irq_exit+0x35/0x40
    [<c01117c1>] smp_apic_timer_interrupt+0x41/0x80
    [<c0103e2f>] common_interrupt+0x23/0x28
    [<c0109a0a>] mwait_idle+0x2a/0x30
    [<c0101d11>] cpu_idle+0x21/0x70
    ---[ end trace e8a945613a166f8c ]---
    ------------[ cut here ]------------
    WARNING: at arch/x86/kernel/pci-nommu.c:62 nommu_map_sg+0x26/0xb0()
    Modules linked in: ipv6 nvidia(P) snd_seq_dummy snd_seq_oss
    snd_seq_midi_event snd_seq snd_pcm_oss
    snd_mixer_oss cifs ntfs ide_cd_mod agpgart ppdev lp parport_pc parport
    hid_dell hid_pl hid_cypres
    s hid_zpff hid_gyration hid_bright hid_sony hid_samsung hid_microsoft
    hid_tmff hid_monterey hid_ez
    key hid_apple hid_a4tech hid_logitech tuner_simple tuner_types
    hid_cherry hid_sunplus hid_petalynx
    hid_belkin hid_chicony wm8775 usbhid hid cx25840 tuner ivtv
    compat_ioctl32 i2c_algo_bit cx2341x s
    nd_ca0106 v4l2_common videodev snd_rawmidi snd_seq_device snd_ac97_codec
    v4l1_compat thermal tveep
    rom processor snd_pcm uhci_hcd snd_timer thermal_sys i2c_i801 ehci_hcd
    sky2 i2c_core psmouse snd s
    oundcore sg serio_raw ac97_bus snd_page_alloc hwmon button evdev [last
    unloaded: nvidia]
    Pid: 0, comm: swapper Tainted: P W 2.6.28-beta #1
    Call Trace:
    [<c012249f>] warn_on_slowpath+0x5f/0x90
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c013ce56>] clocksource_get_next+0x56/0x60
    [<c013b530>] update_wall_time+0x2b0/0x810
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0138fe4>] hrtimer_forward+0x164/0x1b0
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0111050>] lapic_next_event+0x10/0x20
    [<c013e382>] clockevents_program_event+0xa2/0x140
    [<c013f562>] tick_dev_program_event+0x32/0xa0
    [<c013f800>] tick_sched_timer+0x0/0x1c0
    [<c0108626>] nommu_map_sg+0x26/0xb0
    [<c032d3da>] ide_build_sglist+0x4a/0x60
    [<c032d5b2>] ide_build_dmatable+0x32/0x1b0
    [<c012b36a>] __mod_timer+0xaa/0xc0
    [<c032d87b>] ide_dma_setup+0x3b/0xf0
    [<f8ee9000>] ide_cd_do_request+0x410/0x8c0 [ide_cd_mod]
    [<c011d771>] enqueue_task_fair+0xb1/0xd0
    [<f8ee9b60>] cdrom_do_newpc_cont+0x0/0x20 [ide_cd_mod]
    [<c0325a97>] __ide_wait_stat+0x47/0xd0
    [<c03265ff>] ide_wait_stat+0x5f/0x90
    [<c03244f0>] ide_do_request+0x3f0/0x930
    [<c029fa66>] __blk_end_request+0x36/0x50
    [<f8eeae8e>] cdrom_newpc_intr+0x20e/0x730 [ide_cd_mod]
    [<c0108766>] read_tsc+0x6/0x30
    [<c03253a2>] ide_intr+0x252/0x270
    [<f8eeac80>] cdrom_newpc_intr+0x0/0x730 [ide_cd_mod]
    [<c014c375>] handle_IRQ_event+0x25/0x50
    [<c014e0b3>] handle_edge_irq+0xb3/0x140
    [<c0105606>] do_IRQ+0x66/0x80
    [<c0127125>] irq_exit+0x35/0x40
    [<c01117c1>] smp_apic_timer_interrupt+0x41/0x80
    [<c0103e2f>] common_interrupt+0x23/0x28
    [<c0109a0a>] mwait_idle+0x2a/0x30
    [<c0101d11>] cpu_idle+0x21/0x70
    ---[ end trace e8a945613a166f8c ]---
    NVRM: API mismatch: the client has the version 177.82, but
    NVRM: this kernel module has the version 180.18. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    NVRM: API mismatch: the client has the version 177.82, but
    NVRM: this kernel module has the version 180.18. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.
    NVRM: API mismatch: the client has the version 177.82, but
    NVRM: this kernel module has the version 180.18. Please
    NVRM: make sure that this kernel module and all NVIDIA driver
    NVRM: components have the same version.

    #######################################################################################################################

    the last part (NVRM) was because i was trying to use mplayer to play a
    dvd (mplayer -vo xvmc -vc ffmpeg12mc dvd://) which i corrected myself
    by recompiling mplayer, so that can probably be disregarded. However the
    part before it is what concerns me:
    Call Trace:
    [<c012249f>] warn_on_slowpath+0x5f/0x90
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c013ce56>] clocksource_get_next+0x56/0x60
    [<c013b530>] update_wall_time+0x2b0/0x810
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0138fe4>] hrtimer_forward+0x164/0x1b0
    [<c0108766>] read_tsc+0x6/0x30
    [<c013b147>] getnstimeofday+0x37/0xe0
    [<c0111050>] lapic_next_event+0x10/0x20
    [<c013e382>] clockevents_program_event+0xa2/0x140
    [<c013f562>] tick_dev_program_event+0x32/0xa0
    [<c013f800>] tick_sched_timer+0x0/0x1c0
    [<c0108626>] nommu_map_sg+0x26/0xb0
    [<c032d3da>] ide_build_sglist+0x4a/0x60
    [<c032d5b2>] ide_build_dmatable+0x32/0x1b0
    [<c012b36a>] __mod_timer+0xaa/0xc0
    [<c032d87b>] ide_dma_setup+0x3b/0xf0
    [<f8ee9000>] ide_cd_do_request+0x410/0x8c0 [ide_cd_mod]
    [<c011d771>] enqueue_task_fair+0xb1/0xd0
    [<f8ee9b60>] cdrom_do_newpc_cont+0x0/0x20 [ide_cd_mod]
    [<c0325a97>] __ide_wait_stat+0x47/0xd0
    [<c03265ff>] ide_wait_stat+0x5f/0x90
    [<c03244f0>] ide_do_request+0x3f0/0x930
    [<c029fa66>] __blk_end_request+0x36/0x50
    [<f8eeae8e>] cdrom_newpc_intr+0x20e/0x730 [ide_cd_mod]
    [<c0108766>] read_tsc+0x6/0x30
    [<c03253a2>] ide_intr+0x252/0x270
    [<f8eeac80>] cdrom_newpc_intr+0x0/0x730 [ide_cd_mod]
    [<c014c375>] handle_IRQ_event+0x25/0x50
    [<c014e0b3>] handle_edge_irq+0xb3/0x140
    [<c0105606>] do_IRQ+0x66/0x80
    [<c0127125>] irq_exit+0x35/0x40
    [<c01117c1>] smp_apic_timer_interrupt+0x41/0x80
    [<c0103e2f>] common_interrupt+0x23/0x28
    [<c0109a0a>] mwait_idle+0x2a/0x30
    [<c0101d11>] cpu_idle+0x21/0x70
    ---[ end trace e8a945613a166f8c ]---

    seemed to change when i rmmoded sg.ko from the kernel but i still get
    this trace. Might be because i was accessing my dvd drive, i don't know.
    Just thought i would let someone know about this as i upgraded from
    2.6.27.7 --> 2.6.28 to get away from this sort of thing. Besides this,
    the new kernel seems to run fine as far as i can see, but then again i
    have not really tested it that much but i did give 2.6.27.7 a shot.
    Anyway feel free to email me on this one with any suggestions or
    comments as i am noth on the kernel mailing lists. Besides the funny
    trace looks good so far, keep up the good work kernel developers and
    have a happy new year.


    \
     
     \ /
      Last update: 2009-01-05 04:57    [W:3.657 / U:0.304 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site