Messages in this thread | | | Date | Thu, 29 Jan 2009 16:04:02 +0100 | Subject | Re: how to change serial device<->port association | From | Pazzo Da Legare <> |
| |
Dear Oliver,
Thank you very much for your help. I'm going to try your suggestion.
p
2009/1/29 Oliver Neukum <oliver@neukum.org>: > Am Thursday 29 January 2009 13:43:02 schrieb Jan Engelhardt: >> >Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled >> >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> >serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> >serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a NS16550A >> >serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a NS16550A >> >00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> >00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >> >00:0b: ttyS2 at I/O 0x3e8 (irq = 10) is a NS16550A >> >00:0c: ttyS3 at I/O 0x2e8 (irq = 11) is a NS16550A >> > >> >I would like to change the map ttySx -> I/O port. I try with setserial >> >but it doesn't work....Any clue? > > They are just names. Create device nodes with the name you like and > the correct major:minor combination. Udev can do this for you. > > Regards > Oliver > >
| |