lkml.org 
[lkml]   [2009]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.29-rc3: tg3 dead after resume


On Wed, 28 Jan 2009, Parag Warudkar wrote:
>
> Sure, diff -u below. There are differences but not sure if they are
> abnormal or expected.

Well, they're all in the "extended set", ie not the basic registers that
the PCI layer saves. The PCI layer normally just saves the low 16 dwords,
along with the PCI[EX] capability thing.

None of the PCI save/restore routines have ever saved the extended state
(well, "ever" is a strong word - I think we long ago used to pass in how
many bytes we wanted saved, but got rid of it), and it certainly didn't
change with the recent PCI suspend/resume changes.

I get the feeling that it's some odd tg3 issue. That tg3 driver does have
that special

/* Make sure register accesses (indirect or otherwise)
* will function correctly.
*/
pci_write_config_dword(tp->pdev,
TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);

in its own version of setting the power state, and maybe that really
_must_ happen before we actually set the state back to PCI_D0. That sounds
very odd, but hey..

I added Matt Carlson to the cc, since he seems to be the main tg3
authority here.

Matt: the whole discussion is on netdev and the kernel mailing list, but
the short version is that -rc3 suspends and resumes for Parag again
(unlike -rc2), but tg3 doesn't appear to resume properly. The generic PCI
layer now does more at resume time (very early, when interrupts are still
off), see

- pci_pm_resume_noirq ->
pci_pm_default_resume_noirq() ->
pci_restore_standard_config()

for more of the details (basically it always does that
"pci_restore_state()" and tries to bring the device back to PCI_D0).

Linus


\
 
 \ /
  Last update: 2009-01-29 03:13    [W:0.584 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site