lkml.org 
[lkml]   [2009]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: hdb: status error: error=0x40 <3>{ UncorrectableError }
Date
On Sunday 25 January 2009, Bartlomiej Zolnierkiewicz wrote:
> On Sunday 25 January 2009, Jaswinder Singh Rajput wrote:
> > On Mon, Jan 26, 2009 at 2:31 AM, Bill Davidsen <davidsen@tmr.com> wrote:
> > >
> > >
> > > Alan Cox wrote:
> > >>
> > >> On Mon, 26 Jan 2009 02:09:56 +0530
> > >> Jaswinder Singh Rajput
> > >> <jaswinderlinux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > >>
> > >>> Hello all,
> > >>>
> > >>> I added extra IDE drive I get similar messages like below so I replace
> > >>> it another drive but I am still getting similar error messages on
> > >>> 2.6.29-rc2-tip:
> > >>>
> > >>> hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest
> > >>> Error }
> > >>> hdb: status error: error=0x40 <3>{ UncorrectableError },
> > >>> LBAsect=208845, sector=0
> > >>
> > >> Uncorrectable Error is an error from the drive, not the kernel. Looks
> > >> like you have bad sectors on that drive.
> > >>
> > > He noted that he tried another drive, so unless he has a pile of bad drives
> > > it's probably something else. Being "hdb" may indicate that it's connected
> > > to the same controller as "hda" and might not be jumpered for slave. Or it
> > > might be a bad cable, a controller which doesn't like two drives, a dubious
> > > power connector, etc. Or if he doesn't have an hda, perhaps the kernel
> > > doesn't like a secondary drive without a primary.
> > >
> > > Being hdb instead of sdb with a new kernel indicates he is using a config
> > > which may get a lot less testing these days, perhaps?
> > >
> > > In any case, I doubt he had two bad drives, so something else is more
> > > likely.
> > >
> >
> > But earlier both was working fine on some another machines.
>
> Did you try them before on this machine?
>
> Another machine may mean another controller and entirely different
> IDE host driver.
>
> Your bugreport is too sparse in information to say more
> (please at least post IDE related kernel config part).

dmesg would also be useful


\
 
 \ /
  Last update: 2009-01-25 22:59    [W:0.073 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site