lkml.org 
[lkml]   [2009]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: care and feeding of netperf (Re: Mainline kernel OLTP performance update)
From
Date
On Fri, 2009-01-23 at 10:40 -0800, Rick Jones wrote:
> > 3) ./start_netperf_udp_v4.sh 8 #Assume your machine has 8 logical cpus.
>
> Some comments on the script:
Thanks. I wanted to run the testing to get result quickly as long as
the result has no big fluctuation.

>
> > #!/bin/sh
> >
> > PROG_DIR=/home/ymzhang/test/netperf/src
> > date=`date +%H%M%N`
> > #PROG_DIR=/root/netperf/netperf/src
> > client_num=$1
> > pin_cpu=$2
> >
> > start_port_server=12384
> > start_port_client=15888
> >
> > killall netserver
> > ${PROG_DIR}/netserver
> > sleep 2
>
> Any particular reason for killing-off the netserver daemon?
I'm not sure if prior running might leave any impact on later running, so
just kill netserver.

>
> > if [ ! -d result ]; then
> > mkdir result
> > fi
> >
> > all_result_files=""
> > for i in `seq 1 ${client_num}`; do
> > if [ "${pin_cpu}" == "pin" ]; then
> > pin_param="-T ${i} ${i}"
>
> The -T option takes arguments of the form:
>
> N - bind both netperf and netserver to core N
> N, - bind only netperf to core N, float netserver
> ,M - float netperf, bind only netserver to core M
> N,M - bind netperf to core N and netserver to core M
>
> Without a comma between N and M knuth only knows what the command line parser
> will do :)
>
> > fi
> > result_file=result/netperf_${start_port_client}.${date}
> > #./netperf -t UDP_STREAM -l 60 -H 127.0.0.1 -- -P 15895 12391 -s 32768 -S 32768 -m 4096
> > #./netperf -t UDP_STREAM -l 60 -H 127.0.0.1 -i 50 3 -I 99 5 -- -P 12384 12888 -s 32768 -S 32768 -m 4096
> > #${PROG_DIR}/netperf -p ${port_num} -t TCP_RR -l 60 -H 127.0.0.1 ${pin_param} -- -r 1,1 >${result_file} &
> > ${PROG_DIR}/netperf -t UDP_STREAM -l 60 -H 127.0.0.1 ${pin_param} -- -P ${start_port_client} ${start_port_server} -s 32768 -S 32768 -m 4096 >${result_file} &
>
> Same thing here for the -P option - there needs to be a comma between the two
> port numbers otherwise, the best case is that the second port number is ignored.
> Worst case is that netperf starts doing knuth only knows what.
Thanks.

>
>
> To get quick profiles, that form of aggregate netperf is OK - just the one
> iteration with background processes using a moderatly long run time. However,
> for result reporting, it is best to (ab)use the confidence intervals
> functionality to try to avoid skew errors.
Yes. My formal testing uses -i 50. I just wanted a quick testing. If I need
finer-tuning or investigation, I would turn on more options.

> I tend to add-in a global -i 30
> option to get each netperf to repeat its measurments 30 times. That way one is
> reasonably confident that skew issues are minimized.
>
> http://www.netperf.org/svn/netperf2/trunk/doc/netperf.html#Using-Netperf-to-Measure-Aggregate-Performance
>
> And I would probably add the -c and -C options to have netperf report service
> demands.
Yes. That's good. I'm used to start vmstat or mpstat to monitor cpu utilization
in real time.

>
>
> > sub_pid="${sub_pid} `echo $!`"
> > port_num=$((${port_num}+1))
> > all_result_files="${all_result_files} ${result_file}"
> > start_port_server=$((${start_port_server}+1))
> > start_port_client=$((${start_port_client}+1))
> > done;
> >
> > wait ${sub_pid}
> > killall netserver
> >
> > result="0"
> > for i in `echo ${all_result_files}`; do
> > sub_result=`awk '/Throughput/ {getline; getline; getline; print " "$6}' ${i}`
> > result=`echo "${result}+${sub_result}"|bc`
> > done;
>
> The documented-only-in-source :( "omni" tests in top-of-trunk netperf:
>
> http://www.netperf.org/svn/netperf2/trunk
>
> ./configure --enable-omni
>
> allow one to specify which result values one wants, in which order, either as
> more or less traditional netperf output (test-specific -O), CSV (test-specific
> -o) or keyval (test-specific -k). All three take an optional filename as an
> argument with the file containing a list of desired output values. You can give
> a "filename" of '?' to get the list of output values known to that version of
> netperf.
>
> Might help simplify parsing and whatnot.
Yes, it does.

>
> happy benchmarking,
>
> rick jones
Thanks again. I learned a lot.

>
> >
> > echo $result
>
> >



\
 
 \ /
  Last update: 2009-01-24 04:05    [W:0.309 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site