lkml.org 
[lkml]   [2009]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] PCI/MSI: Introduce pci_msix_table_size()
Date
On Wednesday 21 January 2009, Michael Ellerman wrote:
> On Wed, 2009-01-21 at 01:18 +0100, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rjw@sisk.pl>
> >
> > Introduce new function pci_msix_table_size() returning the size of
> > the MSI-X table of given PCI device or 0 if the device doesn't
> > support MSI-X.
> >
> > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> > ---
> > drivers/pci/msi.c | 24 +++++++++++++++++++-----
> > include/linux/pci.h | 5 +++++
> > 2 files changed, 24 insertions(+), 5 deletions(-)
> >
> > Index: linux-2.6/drivers/pci/msi.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/pci/msi.c
> > +++ linux-2.6/drivers/pci/msi.c
> > @@ -670,6 +670,23 @@ static int msi_free_irqs(struct pci_dev*
> > }
> >
> > /**
> > + * pci_msix_table_size - return the number of device's MSI-X table entries
> > + * @dev: pointer to the pci_dev data structure of MSI-X device function
> > + */
> > +int pci_msix_table_size(struct pci_dev *dev)
> > +{
> > + int pos;
> > + u16 control;
> > +
> > + pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> > + if (!pos)
> > + return 0;
> > +
> > + pci_read_config_word(dev, msi_control_reg(pos), &control);
> > + return multi_msix_capable(control);
> > +}
> > +
> > +/**
> > * pci_enable_msix - configure device's MSI-X capability structure
> > * @dev: pointer to the pci_dev data structure of MSI-X device function
> > * @entries: pointer to an array of MSI-X entries
> > @@ -686,9 +703,8 @@ static int msi_free_irqs(struct pci_dev*
> > **/
> > int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
> > {
> > - int status, pos, nr_entries;
> > + int status, nr_entries;
> > int i, j;
> > - u16 control;
> >
> > if (!entries)
> > return -EINVAL;
> > @@ -697,9 +713,7 @@ int pci_enable_msix(struct pci_dev* dev,
> > if (status)
> > return status;
> >
> > - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> > - pci_read_config_word(dev, msi_control_reg(pos), &control);
> > - nr_entries = multi_msix_capable(control);
> > + nr_entries = pci_msix_table_size(dev);
> > if (nvec > nr_entries)
> > return -EINVAL;
>
> I see similar code in msix_capability_init(), although it still needs
> pos. Did you deliberately not replace that, or just miss it?

I didn't replace it exactly because it required the pos anyway.

Thanks,
Rafael


\
 
 \ /
  Last update: 2009-01-21 16:57    [W:0.058 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site