lkml.org 
[lkml]   [2009]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Enable CONFIG_USB_SUSPEND by default or some mobile HD can't be unplugged safely
On Fri, Jan 02, 2009 at 10:56:43AM +0100, Tino Keitel wrote:
> With a WD My Passport drive (2,5"), I need to use sg_start --stop --pc=3
> to stop the disk before unplugging it. Maybe this works with your
> drive, too. This is also required by some Firewire hard disks. Maybe
> the eject command should be extended to use this method, as it is used
> also by HAL to eject hotplug devices.

Hum... I grepped my hal and hal-info packages but haven't found any
scripts using `sg_*'. I'm using hal package 0.5.11-6 from Debian
testing.

Now I know 3 methods supposed can be used to shut the device:
1. (Alan Stern said Windows use this) cut the USB port's power
2. send STOP SCSI command to stop it
3. put it into suspend mode

For the 1st method I have no much experience with Windows so I can't
verify. But now I doubt it. Since there are many early USB devices
that still show light on after you "safely remove" it from Windows. I
guess the power is still supplied but the device is send a command to
be shutdown or suspended.

For the 2nd and 3rd methods, I don't know which one is better, hope
some experts can give advice.

Whatever, I think the suspend mode is a standard USB design and the
kernel should support it by default so we should enable
CONFIG_USB_SUSPEND.

--
Li, Yan


\
 
 \ /
  Last update: 2009-01-02 15:03    [W:0.103 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site