lkml.org 
[lkml]   [2009]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.29-rc2: thinkpad dock -- cdrom vs. s2ram
On Mon 2009-01-19 21:50:58, Rafael J. Wysocki wrote:
> On Monday 19 January 2009, Pavel Machek wrote:
> > Hi!
> >
> > In 2.6.29 (and probably earlier) kernels, booting in docking station
> > results in undocked s2ram failing.
> >
> > Problem seems to be that hda (cdrom in dock) is not deregistered
> > during undock, and that hda driver loops spitting error messages at
> > 'too-fast-to-read' rate when suspend with missing hda is attempted.
>
> What driver do you mean exactly? Old-IDE I would guess.

piix. hda, so I guess it is old-ide:

piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817
Probing IDE interface ide0...
hda: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20

If I try to access cdrom after undocking, I get:

hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
ide-cd: hda: weird block size 0
ide-cd: hda: default to 2kb block size
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted
hda: status error: status=0x20 { DeviceFault }
ide: failed opcode was: unknown
hda: Strange, packet command initiated yet DRQ isn't asserted

...something similar scrolls when it hangs during s2ram, but it is too
fast to read.

> Does this also happen with a PATA/libata driver?

Will try...
Pavel

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2009-01-19 22:45    [W:0.063 / U:0.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site